| Узел | Модель |
|---|
| (14) - TAILGATE HYDRAULICS AND LATCH | (3640) - CASE IH ROUND BALER (1/86-12/87) |
| (10) - HYDRAULIC SYSTEM AND LATCH | (3650) - CASE IH ROUND TIE BALER (1/84-12/88) |
| (12) - HEADER MOUNTING FRAME, 48 FEB SNOW THROWER | (48FEB) - CASE IH SNOW THROWER (1/86-12/91) |
| (46) - MAIN FRAME | (ST54) - CASE IH SNOW THROWER (2/88-12/93) |
| (A-3[01]) - KIT VIBRA CHISEL SHANK ASSY | (5000) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/79-12/88) |
| (C-21) - 55 CONSER-TILL GANG SUPPORT, 10 FOOT AND 13 FOOT MODELS | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (A-3[01]) - KIT VIBRA CHISEL SHANK ASSY | (645) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/77-12/79) |
| (A-04) - 4600 VIBRA SHANK, WING TYPE, HITCH AND CONNECTIONS | (4600) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/83-12/88) |
| (A-15) - 4600 VIBRA SHANK, WING TYPE, VIBRA SHANK | (4600) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/83-12/88) |
| (AR-6) - GAUGE WHEEL ATTACHMENT, SERIAL NO. 590000U000952 & ABOVE | (350) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/86) |
| (P-18[A]) - CENTER TOOTH ATTCHMENT W/6 IN. SWEEP | (470) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/75) |
| (S-20[A]) - CENTER TOOTH ATTACHMENT, BUILT 1970 AND SINCE | (480) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/86) |
| (Q-14) - CENTER TOOTH, W/6 IN. SWEEP | (500) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/88) |
| (AT-07[A]) - TOOTH AND CLAMP | (352) - INTERNATIONAL HARVESTER SPRING-TOOTH HARROW (1/75-12/81) |
| (AT-09) - MULCHER ATTACHMENT | (352) - INTERNATIONAL HARVESTER SPRING-TOOTH HARROW (1/75-12/81) |
| (AS-02) - CENTER FRAME AND WING FRAMES | (354) - INTERNATIONAL HARVESTER SPRING-TOOTH HARROW (1/75-12/81) |
| (AS-04) - CARRIER FRAME AND HITCH | (354) - INTERNATIONAL HARVESTER SPRING-TOOTH HARROW (1/75-12/81) |
| (AS-08) - TEETH, CLAMPS AND GUARDS, 6 IN. SPACING | (354) - INTERNATIONAL HARVESTER SPRING-TOOTH HARROW (1/75-12/81) |
| (AS-09) - MULCHER ATTACHMENT | (354) - INTERNATIONAL HARVESTER SPRING-TOOTH HARROW (1/75-12/81) |
| (AU-06) - TEETH AND CLAMP | (356) - INTERNATIONAL HARVESTER SPRING-TOOTH HARROW (1/75-12/85) |
| (AU-09) - MULCHER ATTACHMENT | (356) - INTERNATIONAL HARVESTER SPRING-TOOTH HARROW (1/75-12/85) |
| (A-23) - SPRING TEETH | (468) - INTERNATIONAL HARVESTER SEED BED CONDITIONER (1/75-12/84) |
| (A-07) - HITCH, NON-FOLDING, UNITS A, B AND C | (315) - INTERNATIONAL HARVESTER PACKER-MULCHER (1/69-12/79) |
| (A-09) - HITCH, FOLDING, UNITS D AND E | (315) - INTERNATIONAL HARVESTER PACKER-MULCHER (1/69-12/79) |
| (B-02) - FRAME AND TINES, UNITS A THRU E | (415) - INTERNATIONAL HARVESTER ROLLER MULCHER (DO NOT CUT TO CD) (1/80-) |
| (A-14) - GANG SUPPORT, 10 AND 13 FOOT | (60) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/78-12/79) |
| (A-17[A]) - TRASH BAR, 15 FOOT | (60) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/78-12/79) |
| (A-25) - HYDRAULIC HOSE SUPPORT, 15 FOOT | (60) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/78-12/79) |
| (A-14) - GANG SUPPORT, 10 AND 13 FOOT | (6000) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/79-12/88) |
| (A-17[A]) - TRASH BAR, 15 FOOT | (6000) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/79-12/88) |
| (A-25) - HYDRAULIC HOSE SUPPORT, 15 FOOT | (6000) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/79-12/88) |
| (AG-02) - CENTER FRAME, WING & BEARINGS, MACHINES BUILT 1973 TO 1975, MACHINES WITH 2 X 1-1/2" SCRAPER ANGLES | (490) - INTERNATIONAL HARVESTER TANDEM DISK HARROW (1/73-12/81) |
| (AG-04) - CENTER FRAME, WING & BEARINGS, MACHINES BUILT 1976 & SINCE, MACHINES WITH 2 X 2" SCRAPER ANGLES | (490) - INTERNATIONAL HARVESTER TANDEM DISK HARROW (1/73-12/81) |
| (AG-05) - CENTER TOOTH | (490) - INTERNATIONAL HARVESTER TANDEM DISK HARROW (1/73-12/81) |
| (A-28) - VIBRA CHISEL | (4700) - INTERNATIONAL HARVESTER VIBRA TILLER (1/82-12/87) |
| (A-29) - VIBRA SHANK | (4700) - INTERNATIONAL HARVESTER VIBRA TILLER (1/82-12/87) |
| (C-04) - ROW CROP UNIT (2-ROW) - SHOES AND DIVIDERS | (720) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/88) |
| (D-03) - ROW CROP UNIT (3-ROW) - SHOES AND DIVIDERS | (720) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/88) |
| (C-04) - ROW CROP UNIT (2-ROW) - SHOES AND DIVIDERS | (830) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/80) |
| (D-03) - ROW CROP UNIT (3-ROW) - SHOES AND DIVIDERS | (830) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/80) |
| (B-13) - MAIN FRAME, HITCH AND TRANSPORT WHEELS, 48 BLOWERS | (48) - INTERNATIONAL HARVESTER BLOWER (1/73-12/10) |
| (S-03) - CARRIER FRAME | (990) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/69-12/78) |
| (S-23) - DEFLECTORS & WINDROWERS | (990) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/69-12/78) |
| (S-38) - WINDOW SHEETS COMPLETING PACKAGE | (990) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/69-12/78) |
| (C-29) - DUAL AUGER, PICK-UP REEL CENTER SHAFT, 12 FT & 14 FT HEAVY | (DUAL) - AUGER HEADER FOR WINDROWERS (1/76-12/90) |
| (48) - MAIN FRAME, 54 FMS SNOW THROWER | (54FMS) - CASE IH SNOW THROWER (1/88-12/88) |
| (28) - MAIN FRAME, 54 FRS SNOW THROWER | (54FRS) - CASE IH SNOW THROWER (1/88-12/88) |
| (36) - CHAIN BOX, 54 FRS SNOW THROWER | (54FRS) - CASE IH SNOW THROWER (1/88-12/88) |
| (A-15) - MAIN DRIVE GEAR CASE | (241) - INTERNATIONAL HARVESTER BIGROLL ROUND BALER (1/74-12/79) |
| (9-132) - CASTER WHEEL AXLE, 20 X 6, 24 X 6, 28 X 6, 20 X 7, 24 X 7 | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-112) - CASTER WHEEL AXLE | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-124) - FURROW OPENER DRAWBAR MOUNTING BRACKETS | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-032) - GRAIN FEED CONTROLS | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (9-028) - GRAIN FEED CONTROLS | (8600) - CASE IH AIR DRILL (8/87-12/96) |
| (9-060) - TOOLBAR MAIN FRAME | (8600) - CASE IH AIR DRILL (8/87-12/96) |
| (9-062) - TOOLBAR WING FRAMES | (8600) - CASE IH AIR DRILL (8/87-12/96) |
| (07-19) - SEED HANDLING, FAN AND CONNECTIONS, UNITS A THRU E, H, J, R, S, U, V, W, X, Y AND Z, ONE PER MODULE | (800) - CASE IH PLANTER (1/77-12/86) |
| (10-16) - FERTILIZER, DOUBLE DISK OPENERS, UNITS A THRU G, M, S AND T, ONE PER ROW | (800) - CASE IH PLANTER (1/77-12/86) |
| (9C-10) - SEED MODULE FAN | (950) - CASE IH SEMI-MOUNTED PLANTER (11/93-12/95) |
| (9D-02) - ROW UNIT FRAME, ALL PLANTERS EXCEPT SOLID ROW CROP | (950) - CASE IH SEMI-MOUNTED PLANTER (11/93-12/95) |
| (9-38) - MULCHER, TWO BAR COIL TINE | (365) - CASE IH VIBRA TINE CULTIVATOR (1/87-12/97) |
| (D-16) - MULCHER, 2 BAR COIL TINE | (365) - INTERNATIONAL HARVESTER CULTIVATOR (1/80-12/88) |
| (9-38) - CENTER SHANK ATTACHMENT, U-BOLT RETAINED SUPPORT BRACKET | (350) - CASE IH DISK HARROW (1/74-12/91) |
| (9-48) - CENTER SHANK ATTACHMENT U-BOLT RETAINED SUPPORT BRACKET | (370) - CASE IH DISK HARROW (1/80-12/86) |
| (9-04) - MAIN FRAME | (475) - CASE IH DISK HARROW (1/75-12/86) |
| (9-44) - CENTER SHANK ATTACHMENT | (475) - CASE IH DISK HARROW (1/75-12/86) |
| (9-06) - WING FRAME | (496) - CASE IH DISK HARROW (1/80-12/91) |
| (9-08) - HITCH | (496) - CASE IH DISK HARROW (1/80-12/91) |
| (9-06) - HITCH | (596) - CASE IH DISK HARROW (1/80-12/00) |
| (9-02) - MAIN FRAME | (780) - CASE IH DISK HARROW (1/86-12/04) |
| (9-04) - HITCH | (780) - CASE IH DISK HARROW (1/86-12/04) |
| (09-14) - HITCH | (4200) - CASE IH COMBO-MULCH FINISHER (1/92-12/00) |
| (9-04) - HITCH | (6500) - CASE IH CONSER-TILL PLOW (1/87-12/97) |
| (9-16) - DISK GANG SUPPORT | (6500) - CASE IH CONSER-TILL PLOW (1/87-12/97) |
| (9A-012) - MAIN DRIVE SHAFT | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-064) - BLOWER HOUSING | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-076) - TONGUE SHIELDING | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9D-18) - DIVIDERS AND SHOES, CONTINUED | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-012) - MAIN DRIVE SHAFT | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (9A-064) - BLOWER HOUSING | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (9A-076) - TONGUE SHIELDING | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (9D-18) - DIVIDERS AND SHOES, CONTINUED | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (23-03) - AUGER BED, SHOE AND SHOE SIEVE, SHAKER SHAFT AND AUGER DRIVE | (1420) - INTERNATIONAL HARVESTER COMBINE (NORTH AMERICA) (1/81-12/82) |
| (14-03) - SUSPENSION, STEERING AXLE, SUPPORT AND TIE ROD, ADJUSTABLE | (1420) - INTERNATIONAL HARVESTER COMBINE (NORTH AMERICA) (1/81-12/82) |
| (33-06) - FEEDER, ROCK TRAP | (1420) - INTERNATIONAL HARVESTER COMBINE (NORTH AMERICA) (1/81-12/82) |
| (23-03) - AUGER BED, SHOE AND SHOE SIEVE, SHAKER SHAFT AND AUGER DRIVE | (1470) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/80-12/87) |
| (33-14) - FEEDER, ROCK TRAP | (1470) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/80-12/87) |
| (23-05) - AUGER BED, SHOE AND SHOE SIEVE, SHAKER SHAFT AND AUGER DRIVE, S/N 1501 & ABOVE | (1440) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (14-04) - SUSPENSION, STEERING AXLE, SUPPORT AND TIE ROD, ADJUSTABLE | (1440) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (33-07) - FEEDER, ROCK TRAP | (1440) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (23-05) - AUGER BED, SHOE AND SHOE SIEVE, SHAKER SHAFT AND AUGER DRIVE, S/N 1501 AND ABOVE | (1460) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (14-03) - SUSPENSION, STEERING AXLE, SUPPORT AND TIE ROD, ADJUSTABLE FOR GRAIN AND CORN | (1460) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (33-07) - FEEDER, ROCK TRAP | (1460) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (14-006) - STEERING AXLE, SUPPORT AND TIE ROD, ADJUSTABLE, FOR GRAIN AND CORN | (1460) - INTERNATIONAL HARVESTER COMBINE (EUROPE) (1/77-12/84) |
| (23-03) - AUGER BED, SHOE AND SHOE SIEVE, SHAKER SHAFT AND AUGER DRIVE | (1480) - CASE IH AXIAL-FLOW COMBINE (1/78-12/84) |
| (33-07) - FEEDER, ROCK TRAP | (1480) - CASE IH AXIAL-FLOW COMBINE (1/78-12/84) |
| (5-020) - STEERING TIE ROD, ADJUSTABLE AXLES | (1620) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/86-12/92) |
| (9-046) - ROCK TRAP | (1620) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/86-12/92) |
| (9-094) - SHAKER SHAFT AND AUGER DRIVE | (1620) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/86-12/92) |
| (5-02) - STEERING SUPPORT AND WHEEL | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (5-20) - STEERING TIE ROD, ADJUSTABLE AXLES | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (9A-44) - ROCK TRAP | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (9B-38) - SHAKER SHAFT AND AUGER DRIVE | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (5-02) - STEERING SUPPORT AND WHEEL | (1640) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0034705) (NORTH AMERICA) (1/86-12/92) |
| (5-26) - STEERING TIE ROD, ADJUSTABLE AXLES, EXCEPT POWER GUIDE AXLE | (1640) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0034705) (NORTH AMERICA) (1/86-12/92) |
| (9A-38) - ROCK TRAP | (1640) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0034705) (NORTH AMERICA) (1/86-12/92) |
| (9B-40) - SHAKER SHAFT AND AUGER DRIVE | (1640) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0034705) (NORTH AMERICA) (1/86-12/92) |
| (9D-24) - ELEVATOR DRIVE JACKSHAFT | (1640) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0034705) (NORTH AMERICA) (1/86-12/92) |
| (5-02) - STEERING SUPPORT AND WHEEL | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (5-26) - STEERING TIE ROD, ADJUSTABLE AXLE, EXCEPT POWER GUIDE AXLE | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (9A-40) - ROCK TRAP | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (9B-36) - SHAKER SHAFT AND AUGER DRIVE, PRIOR TO P.I.N. JJC0097190 | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (9B-38) - SHAKER SHAFT AND AUGER DRIVE, HEAVY DUTY DRIVE, SERIAL NO. JJC0097190 & AFTER | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (9D-24) - ELEVATOR DRIVE JACKSHAFT | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (40) - SHAKER SHAFT AND AUGER DRIVE, HEAVY DUTY DRIVE, EXTENDED LENGTH CLEANING SYSTEM | (1640) - COMBINE SUPPLEMENT (1/86-12/92) |
| (056) - SHAKER SHAFT AND AUGER DRIVE, HEAVY DUTY DRIVE, EXTENDED LENGTH CLEANING SYSTEM | (1660) - COMBINE SUPPLEMENT (S/N JJC0038346 & AFTER) (1/86-12/91) |
| (5-002) - STEERING SUPPORT AND WHEEL | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (9A-38) - ROCK TRAP | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (9B-36) - SHAKER SHAFT AND AUGER DRIVE | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (9D-28) - ELEVATOR DRIVE JACKSHAFT | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (080) - SHAKER SHAFT AND AUGER DRIVE, HEAVY DUTY DRIVE, EXTENDED LENGTH CLEANING SYSTEM | (1680) - COMBINE SUPPLEMENT (1/86-12/88) |
| (5-02) - STEERING SUPPORT AND WHEEL | (1670) - CASE IH HILLSIDE COMBINE (1/89-12/91) |
| (9A-46) - ROCK TRAP | (1670) - CASE IH HILLSIDE COMBINE (1/89-12/91) |
| (9B-36) - SHAKER SHAFT AND AUGER DRIVE | (1670) - CASE IH HILLSIDE COMBINE (1/89-12/91) |
| (9D-24) - ELEVATOR DRIVE JACKSHAFT | (1670) - CASE IH HILLSIDE COMBINE (1/89-12/91) |
| (23-03) - AUGER BED, SHOE AND SHOE SIEVE, SHAKER SHAFT AND AUGER DRIVE | (1482) - INTERNATIONAL HARVESTER PULL BEHIND COMBINE (1/80-12/86) |
| (26-13) - GRAIN TANK, GRAIN TANK UNLOADER DRIVE | (1482) - INTERNATIONAL HARVESTER PULL BEHIND COMBINE (1/80-12/86) |
| (20-01) - SEPARATOR, SEPARATOR SIDES | (1482) - INTERNATIONAL HARVESTER PULL BEHIND COMBINE (1/80-12/86) |
| (33-05) - FEEDER, ROCK TRAP | (1482) - INTERNATIONAL HARVESTER PULL BEHIND COMBINE (1/80-12/86) |
| (07-20) - DRIVE TRAIN, PROPULSION CONTROL, HYDROSTATIC DRIVE | (95) - INTERNATIONAL HARVESTER COTTON HARVESTER (1/74-12/88) |
| (07-20) - DRIVE TRAIN, PROPULSION CONTROL, HYDROSTATIC DRIVE | (95) - INTERNATIONAL HARVESTER FINGER HEAD COTTON HARVESTER (1/74-12/88) |
| (5-02) - STEERING WHEEL AND SUPPORT | (1822) - CASE IH COTTON PICKER (S/N JJC0012691 & AFTER) (7/89-12/93) |
| (9A-084) - DRUM LIFT ARM, 1822 COTTON PICKER | (1822) - CASE IH COTTON PICKER (S/N JJC0012691 & AFTER) (7/89-12/93) |
| (6-16) - PROPULSION CONTROLS,1822 COTTON PICKER | (1822) - CASE IH COTTON PICKER W/NAVISTAR ENGINE (1/88-12/93) |
| (9-086) - DRUM LIFT ARM, 1822 COTTON PICKER | (1822) - CASE IH COTTON PICKER W/NAVISTAR ENGINE (1/88-12/93) |
| (5-02) - STEERING WHEEL AND SUPPORT | (1844) - CASE IH COTTON PICKER (S/N JJC0002462 & AFTER) (7/89-12/93) |
| (9A-088) - DRUM LIFT ARM, 1844 COTTON PICKER | (1844) - CASE IH COTTON PICKER (S/N JJC0002462 & AFTER) (7/89-12/93) |
| (6-18) - PROPULSION CONTROLS, 1844 COTTON PICKER | (1844) - CASE IH COTTON PICKER W/NAVISTAR ENGINE (1/88-12/93) |
| (9-090) - DRUM LIFT ARM, 1844 COTTON PICKER | (1844) - CASE IH COTTON PICKER W/NAVISTAR ENGINE (1/88-12/93) |
| (6-168) - PROPULSION DRIVE CONTROLS | (782) - CASE IH COTTON PICKER (5/86-12/87) |
| (6-168) - PROPULSION DRIVE CONTROLS | (782) - INTERNATIONAL HARVESTER COTTON PICKER (1/71-12/87) |
| (9-006) - 5 BAT REEL, 30.0 FOOT HEADER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-012) - 6 BAT REEL, STEEL TINES, HART CARTER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-016) - 6 BAT REEL, 52 INCH REEL WITH STEEL TINES, HART CARTER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-018) - 6 BAT REEL, BAT AND STEEL TINE ASSEMBLY, HART CARTER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-020) - 6 BAT REEL, PLASTIC TINES, J.E. LOVE | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-028) - 6 BAT REEL, SINGLE ECCENTRIC, PLASTIC TINES, 15.0, 17.5 AND 20.0 HEADER, HART CARTER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-032) - 6 BAT REEL, DOUBLE ECCENTRIC, PLASTIC TINES, 20.0, 22.5, 30.0 FOOT HEADER, HART CARTER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-040) - REEL DRIVE | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-046) - REEL SUPPORT ARMS AND LIFT CYLINDER | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-048) - REEL FORE AND AFT ADJUSTMENT, HYDRAULIC | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-050) - REEL FORE AND AFT ADJUSTMENT, MECHANICAL | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-088) - AUGER FINGERS, MODELS WITH AUGER DRIVE ON LEFT-HAND SIDE OF HEADER, WITH KNIFE DRIVE | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-089A) - AUGER FINGERS, MODELS WITH AUGER DRIVE ON RIGHT-HAND SIDE OF HEADER, SPLIT KNIFE AND AUGER DRIVE | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-092) - AUGER SUPPORTS, MODELS WITH AUGER DRIVE ON LEFT-HAND SIDE OF HEADER, WITH KNIFE DRIVE) | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9-093A) - AUGER SUPPORTS, MODELS WITH AUGER DRIVE ON RIGHT-HAND SIDE OF HEADER, SPLIT KNIFE AND AUGER DRIVE | (1010) - GRAIN HEADER (PRIOR TO S/N JJC0200000) (1/86-12/04) |
| (9A-38) - REEL SUPPORT ARMS AND LIFT CYLINDER | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9A-40) - REEL FORE AND AFT ADJUSTMENT, HYDRAULIC | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9A-42) - REEL FORE AND AFT ADJUSTMENT, MECHANICAL | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9A-04) - 6 BAT REEL, STEEL TINES OR REAR MOUNTED PLASTIC TINES | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9A-08) - BAT ASSEMBLY WITH STEEL TINES | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9A-12) - 6 BAT REEL, FRONT MOUNTED PLASTIC TINES | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9A-22) - 6 BAT REEL, SINGLE ECCENTRIC, PLASTIC TINES, 15, 16-1/2, 17-1/2 AND 20 FOOT HEADER (HART-CARTER) | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9A-26) - 6 BAT REEL, DOUBLE ECCENTRIC, PLASTIC TINES, 20, 22-1/2, 25 AND 30 FOOT HEADER (HART-CARTER) | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9A-32) - REEL DRIVE | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9C-04) - AUGER FINGERS, MODELS WITH AUGER DRIVE ON LEFT-HAND SIDE OF HEADER (WITH KNIFE DRIVE) | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9C-05A) - AUGER FINGERS, MODELS WITH AUGER DRIVE ON RIGHT-HAND SIDE OF HEADER (SPLIT KNIFE W/ AUGER DRIVE) | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9C-06) - AUGER SUPPORTS, MODELS WITH AUGER DRIVE ON LEFT-HAND SIDE OF HEADER (W/ KNIFE DRIVE) | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9C-07A) - AUGER SUPPORTS, MODELS WITH AUGER DRIVE ON RIGHT-HAND SIDE OF HEADER (SPLIT KNIFE W/ AUGER DRIVE) | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9D-18) - DIVIDERS | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9D-20) - WING DIVIDERS AND ROD DIVIDERS | (1020) - GRAIN HEADER (PRIOR TO S/N JJC0215001) (1/86-12/02) |
| (9-068) - CARRIER FRAME, 1490 AND 1590 MOWER CONDITIONER | (1490) - CASE IH MOWER CONDITIONER (1/85-12/88) |
| (9-068) - CARRIER FRAME, 1490 AND 1590 MOWER CONDITIONER | (1590) - CASE IH MOWER CONDITIONER (1/85-12/88) |
| (9-102) - MOWER DECK, 60FMS MOWER | (60FMS) - CASE IH ROTARY MOWER (1/91-12/99) |
| (9-108) - CASTER WHEELS, 60FMS MOWER | (60FMS) - CASE IH ROTARY MOWER (1/91-12/99) |
| (9-110) - HITCH, 60FMS MOWER | (60FMS) - CASE IH ROTARY MOWER (1/91-12/99) |
| (9-112) - HITCH MOUNTING, 60FMS MOWER | (60FMS) - CASE IH ROTARY MOWER (1/91-12/99) |
| (9-074) - MOWER DECK, 60FS MOWER | (60FS) - CASE IH ROTARY MOWER (1/86-12/92) |
| (9-082) - HITCH, 60FS MOWER | (60FS) - CASE IH ROTARY MOWER (1/86-12/92) |
| (9-084) - HITCH MOUNTING BRACKET, 60FS MOWER | (60FS) - CASE IH ROTARY MOWER (1/86-12/92) |
| (9-090) - DRIVE BOX, 60FS MOWER, 245 AND 255 TRACTOR | (60FS) - CASE IH ROTARY MOWER (1/86-12/92) |
| (9-040) - MOWER DECK AND REAR WHEELS, 60MB MOWER | (60MB) - CASE IH ROTARY MOWER (1/86-12/92) |
| (9-048) - FRONT CASTER WHEEL, 60MB MOWER | (60MB) - CASE IH ROTARY MOWER (1/86-12/92) |
| (9-006) - MOWER DECK, 60RS MOWER | (60RS) - CASE IH ROTARY MOWER (1/86-12/88) |
| (9-010) - CASTER WHEELS, 60RS MOWER | (60RS) - CASE IH ROTARY MOWER (1/86-12/88) |
| (9-012) - HITCH, 60RS MOWER | (60RS) - CASE IH ROTARY MOWER (1/86-12/88) |
| (9-014) - FRONT GAUGE WHEEL, 60RS MOWER | (60RS) - CASE IH ROTARY MOWER (1/86-12/88) |
| (9-066) - FRONT CASTER WHEELS, 61MB MOWER | (61MB) - CASE IH ROTARY MOWER (1/86-12/88) |
| (9-022) - MOWER DECK, 72RS MOWER | (72RS) - CASE IH ROTARY MOWER (1/86-12/88) |
| (9-026) - CASTER WHEELS, 72RS MOWER | (72RS) - CASE IH ROTARY MOWER (1/86-12/88) |
| (9-028) - HITCH, 72RS MOWER | (72RS) - CASE IH ROTARY MOWER (1/86-12/88) |
| (9-030) - FRONT GAUGE WHEEL, 72RS MOWER | (72RS) - CASE IH ROTARY MOWER (1/86-12/88) |
| (9-64) - THREE POINT HITCH WITH PULLEY, 1300 MOWER | (1300) - INTERNATIONAL HARVESTER BALANCED MOWER (1/68-12/91) |
| (2-02) - RADIATOR AND CONNECTIONS, C-232 AND C-258 GAS ENGINE | (4000) - CASE IH SELF-PROPELLED WINDROWER (S/N 4501 & AFTER) (1/80-12/86) |
| (2-56) - RADIATOR AND CONNECTIONS, D-239 DIESEL ENGINE | (4000) - CASE IH SELF-PROPELLED WINDROWER (S/N 4501 & AFTER) (1/80-12/86) |
| (2-58) - ENGINE AND ENGINE MOUNTS, D-239 DIESEL ENGINE | (4000) - CASE IH SELF-PROPELLED WINDROWER (S/N 4501 & AFTER) (1/80-12/86) |
| (7-04) - HAND BRAKE | (4000) - CASE IH SELF-PROPELLED WINDROWER (S/N 4501 & AFTER) (1/80-12/86) |
| (9-38) - OPERATORS PLATFORM AND FRONT RAILS | (4000) - CASE IH SELF-PROPELLED WINDROWER (S/N 4501 & AFTER) (1/80-12/86) |
| (9-40) - OPERATORS PLATFORM AND FRONT RAILS | (4000) - CASE IH SELF-PROPELLED WINDROWER (S/N 4501 & AFTER) (1/80-12/86) |
| (9-44) - OPERATORS CAB MOUNTING AND RAILS | (4000) - CASE IH SELF-PROPELLED WINDROWER (S/N 4501 & AFTER) (1/80-12/86) |
| (06-01) - COOLING, RADIATOR AND CONNECTIONS, C-232 GAS ENGINE FOR USE ON 4000 WINDROWERS | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-14) - DRIVE TRAIN, TWO SPEED VARIABLE CONTROLS | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (13-01) - SUPERSTRUCTURE, OPERATORS DECK | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (13-03) - SUPERSTRUCTURE, OPERATORS DECK | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (13-18) - SUPERSTRUCTURE, OPERATORS CAB MOUNTING AND RAILS | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (2-02) - RADIATOR AND CONNECTIONS, C-232 AND C-258 GAS ENGINE | (5000) - CASE IH SELF-PROPELLED WINDROWER (S/N 1901 & AFTER) (1/80-12/86) |
| (2-56) - RADIATOR AND CONNECTIONS, D-239 DIESEL ENGINE | (5000) - CASE IH SELF-PROPELLED WINDROWER (S/N 1901 & AFTER) (1/80-12/86) |
| (2-58) - ENGINE AND ENGINE MOUNTS, D-239 DIESEL ENGINE | (5000) - CASE IH SELF-PROPELLED WINDROWER (S/N 1901 & AFTER) (1/80-12/86) |
| (7-04) - HAND BRAKE | (5000) - CASE IH SELF-PROPELLED WINDROWER (S/N 1901 & AFTER) (1/80-12/86) |
| (9-38) - OPERATORS PLATFORM AND FRONT RAILS | (5000) - CASE IH SELF-PROPELLED WINDROWER (S/N 1901 & AFTER) (1/80-12/86) |
| (9-40) - OPERATORS PLATFORM AND FRONT RAILS | (5000) - CASE IH SELF-PROPELLED WINDROWER (S/N 1901 & AFTER) (1/80-12/86) |
| (9-44) - OPERATORS CAB MOUNTING AND RAILS | (5000) - CASE IH SELF-PROPELLED WINDROWER (S/N 1901 & AFTER) (1/80-12/86) |
| (06-02) - COOLING, RADIATOR AND CONNECTIONS, HB-225 GAS ENGINE FOR USE ON 5000 AND 5500 WINDROWERS | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (06-03) - COOLING, RADIATOR AND CONNECTIONS, D-239 DIESEL ENGINE FOR USE ON 5000 AND 5500 WINDROWERS | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (12-30) - POWER, ENGINE AND MOUNTING D-239 DIESEL ENGINE, FOR USE ON 5000 AND 5500 WINDROWERS | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-14) - DRIVE TRAIN, TWO SPEED VARIABLE CONTROLS | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (13-01) - SUPERSTRUCTURE, OPERATORS DECK | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (13-03) - SUPERSTRUCTURE, OPERATORS DECK | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (13-18) - SUPERSTRUCTURE, OPERATORS CAB MOUNTING AND RAILS | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (06-02) - COOLING, RADIATOR AND CONNECTIONS, HB-225 GAS ENGINE FOR USE ON 5000 AND 5500 WINDROWERS | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (06-03) - COOLING, RADIATOR AND CONNECTIONS, D-239 DIESEL ENGINE FOR USE ON 5000 AND 5500 WINDROWERS | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (12-30) - POWER, ENGINE AND MOUNTING D-239 DIESEL ENGINE, FOR USE ON 5000 AND 5500 WINDROWERS | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-14) - DRIVE TRAIN, TWO SPEED VARIABLE CONTROLS | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (13-01) - SUPERSTRUCTURE, OPERATORS DECK | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (B-07) - MAIN DRIVE SHAFT | (570) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (B-26) - BOX FRONT SIDE | (570) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (B-07) - MAIN DRIVE SHAFT | (580) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (B-26) - BOX FRONT SIDE | (580) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (07-3) - DRIVE TRAIN, HYDRAULIC AND HYDROSTATIC CONTROLS | (4120) - INTERNATIONAL HARVESTER COMPACT LOADER (1/77-12/79) |
| (13-01) - SUPERSTRUCTURE | (4140) - INTERNATIONAL HARVESTER COMPACT LOADER (1/77-12/81) |
| (13-03) - SUPERSTRUCTURE, SUPERSTRUCTURE, LOADER, DIESEL LOADER | (4150) - INTERNATIONAL HARVESTER COMPACT LOADER (1/77-12/80) |
| (13-06) - SUPERSTRUCTURE, SUPERSTRUCTURE, LOADER | (4150) - INTERNATIONAL HARVESTER COMPACT LOADER (1/77-12/80) |
| (12-01) - POWER, ENGINE & MOUNTING | (4155) - INTERNATIONAL HARVESTER COMPACT LOADER (1/80-12/81) |
| (C-2) - NO. 11 BALE CARRIER ATTACHMENT, FOR TRACTORS WITH 3 POINT HITCH | (11) - INTERNATIONAL HARVESTER BALE CARRIER ATTACHMENT (1/73-12/88) |
| (06-03) - COOLING, GRILLE, SUPPORT, SHUTTER AND SCREEN | (4366) - INTERNATIONAL 4WD DIESEL TRACTOR (1/73-12/76) |
| (07-09) - DRIVE TRAIN, TRANSMISSION CONTROLS, RANGE LEVER, 4366 TRACTOR | (4366) - INTERNATIONAL 4WD DIESEL TRACTOR (1/73-12/76) |
| (13-06) - CAB AND SUPERSTRUCTURE, CAB AND ACCESSORIES, 4366 TRACTORS | (4366) - INTERNATIONAL 4WD DIESEL TRACTOR (1/73-12/76) |
| (10-34) - HYDRAULICS, VALVE BANK AND CONNECTIONS, FOR THREE VALVE BANK ASSEMBLY | (4366) - INTERNATIONAL 4WD DIESEL TRACTOR (1/73-12/76) |
| (10-36) - HYDRAULICS, VALVE BANK AND CONNECTIONS, FOR TWO VALVE BANK ASSEMBLY | (4366) - INTERNATIONAL 4WD DIESEL TRACTOR (1/73-12/76) |
| (09-05) - FRAME, DRAWBAR ASSY, ROLLER TYPE | (4366) - INTERNATIONAL 4WD DIESEL TRACTOR (1/73-12/76) |
| (09-07) - FRAME, THREE POINT HITCH ATTACHMENT | (4366) - INTERNATIONAL 4WD DIESEL TRACTOR (1/73-12/76) |
| (06-03) - COOLING, GRILLE, SUPPORT, SHUTTER AND SCREEN | (4386) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/81) |
| (13-08) - CAB AND SUPERSTRUCTURE, CAB AND ACCESSORIES, 4386 TRACTORS | (4386) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/81) |
| (10-34) - HYDRAULICS, VALVE BANK AND CONNECTIONS, FOR THREE VALVE BANK ASSEMBLY | (4386) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/81) |
| (10-36) - HYDRAULICS, VALVE BANK AND CONNECTIONS, FOR TWO VALVE BANK ASSEMBLY | (4386) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/81) |
| (10-38) - HYDRAULICS, FOURTH VALVE AND CONNECTIONS, FOR FOUR AUXILIARY VALVES, 4386 TRACTORS | (4386) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/81) |
| (09-05) - FRAME, DRAWBAR ASSY, ROLLER TYPE | (4386) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/81) |
| (09-07) - FRAME, THREE POINT HITCH ATTACHMENT | (4386) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/81) |
| (06-04) - COOLING, GRILLE, SUPPORT, SHUTTER AND SCREEN | (4568) - INTERNATIONAL 4WD DIESEL TRACTOR (1/75-12/76) |
| (07-12[A]) - DRIVE TRAIN, TRANSMISSION HOUSING SUPPORT | (4568) - INTERNATIONAL 4WD DIESEL TRACTOR (1/75-12/76) |
| (13-06) - CAB AND SUPERSTRUCTURE, CAB AND ACCESSORIES, 4568 TRACTOR | (4568) - INTERNATIONAL 4WD DIESEL TRACTOR (1/75-12/76) |
| (09-05) - FRAME, DRAWBAR ASSY, 4586 TRACTORS WITH SERIAL NO. 2500 AND BELOW, ALL 4568 TRACTORS | (4568) - INTERNATIONAL 4WD DIESEL TRACTOR (1/75-12/76) |
| (06-04) - COOLING, GRILLE, SUPPORT, SHUTTER AND SCREEN | (4586) - INTERNATIONAL 4WD DIESEL TRACTOR (1/75-12/81) |
| (07-12[A]) - DRIVE TRAIN, TRANSMISSION HOUSING SUPPORT | (4586) - INTERNATIONAL 4WD DIESEL TRACTOR (1/75-12/81) |
| (13-08) - CAB AND SUPERSTRUCTURE, CAB AND ACCESSORIES, 4586 TRACTOR | (4586) - INTERNATIONAL 4WD DIESEL TRACTOR (1/75-12/81) |
| (09-05) - FRAME, DRAWBAR ASSY, 4586 TRACTORS WITH SERIAL NO. 2500 AND BELOW, ALL 4568 TRACTORS | (4586) - INTERNATIONAL 4WD DIESEL TRACTOR (1/75-12/81) |
| (06-4) - COOLING, GRILLE, SUPPORT, SHUTTER AND SCREEN | (4786) - INTERNATIONAL 4WD DIESEL TRACTOR (1/78-12/81) |
| (07-09[A]) - DRIVE TRAIN, TRANSMISSION HOUSING SUPPORT | (4786) - INTERNATIONAL 4WD DIESEL TRACTOR (1/78-12/81) |
| (13-03) - CAB AND SUPERSTRUCTURE, CAB AND ACCESSORIES | (4786) - INTERNATIONAL 4WD DIESEL TRACTOR (1/78-12/81) |
| (09-3) - FRAME, DRAWBAR ASSY | (4786) - INTERNATIONAL 4WD DIESEL TRACTOR (1/78-12/81) |
| (9-06) - A-FRAME, 54F BLADE | (54F) - CASE IH BLADE (1/68-12/93) |
| (9-08) - A-FRAME, 72F BLADE | (72F) - CASE IH BLADE (1/86-12/93) |
| (9-12) - MAIN FRAME, 72F BLADE | (72F) - CASE IH BLADE (1/86-12/93) |
