| Узел | Модель |
|---|
| (026) - DEPTH CONTROL HYDRAULICS, TWO DRILL HITCH | (5100) - CASE IH END WHEEL GRAIN DRILL (1/88-12/90) |
| (A-68) - TWO DRILL HITCH HYDRAULICS, RECOMMENDED HYDRAULICS | (620) - INTERNATIONAL HARVESTER GRAIN DRILL (1/80-12/88) |
| (F-23) - ROCKSHAFT LIFT HYDRAULICS, WITH HYDRAULIC WING LIFT, TRACTOR WITH SINGLE VAVLE HYDRAULICS | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (F-24) - WING LIFT HYDRAULIC, WITH SINGLE VALVE CONTROLS | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (F-26) - WING LIFT HYDRAULIC WITH SINGLE VALVE, 22 FOOT MODEL BUILT 1968 SEASON TO AUGUST, 1973 | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (J-17) - DEPTH CONTROL HYDRAULICS, CESSNA | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (J-19) - DEPTH CONTROL HYDRAULICS, CROSS | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (F-21) - DEPTH CONTROL HYD. SYSTEM, WING TYPE, WITH WELDED TYPE CYLINDER, MACHINES BUILT 1980 THROUGH 1985 | (5500) - INTERNATIONAL HARVESTER CHISEL PLOW (1/79-12/87) |
| (F-23) - DEPTH CONTROL HYD. SYSTEM, WING TYPE, WITH BOLTED TYPE CYLINDER, MACHINES BUILT 1980 THROUGH 1985 | (5500) - INTERNATIONAL HARVESTER CHISEL PLOW (1/79-12/87) |
| (G-35) - DEPTH CONTROL HYDRAULIC SYSTEM, WING TYPE, 33 FOOT AND 39 FOOT DOUBLE FOLD, W/ WELDED TYPE CYLINDER | (5500) - INTERNATIONAL HARVESTER CHISEL PLOW (1/79-12/87) |
| (G-37) - DEPTH CONTROL HYDRAULIC SYSTEM, WING TYPE, 33 FOOT AND 39 FOOT DOUBLE FOLD, W/ BOLTED TYPE CYLINDER | (5500) - INTERNATIONAL HARVESTER CHISEL PLOW (1/79-12/87) |
| (G-39) - DEPTH CONTROL HYDRAULIC SYSTEM, WING TYPE, 45 FOOT DOUBLE FOLD, WITH WELDED TYPE CYLINDER | (5500) - INTERNATIONAL HARVESTER CHISEL PLOW (1/79-12/87) |
| (G-41) - DEPTH CONTROL HYDRAULIC SYSTEM, WING TYPE, 45 FOOT DOUBLE FOLD, WITH BOLTED TYPE CYLINDER | (5500) - INTERNATIONAL HARVESTER CHISEL PLOW (1/79-12/87) |
| (D-40) - WING LIFT HYDRAULICS, W/SINGLE MAIN ROCKSHAFT, W/SINGLE HYDRAULIC CONTROL 1969 SEASON TO 1974 SEASON | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (D-42) - WING LIFT HYDRAULICS, W/SINGLE MAIN ROCKSHAFT, W/DUAL HYDRAULIC CONTROLS, 1969 SEASON TO 1974 SEASON | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (D-44) - WING LIFT HYD,W/SINGLE MAIN ROCKSHAFT,W/SINGLE HYD CTRL UNIT,22'6" MODEL BUILT 1974 -AUG 1976 SEASON | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (D-45) - WING LIFT HYD, W/SINGLE MAIN ROCKSHAFT, W/DUAL HYD CTRL, 22'6" MODEL BUILT 1974 TO AUG 1976 SEASON | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (D-46) - WING LIFT HYD,W/SINGLE MAIN ROCKSHAFT,W/DUAL HYD CTRL,31'6" MODEL BUILT 1974 SEASON - AUG1976 SEASON | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (D-57) - DEPTH CONTROL HYDRAULICS, CESSNA, OPT WITH CROSS HYD CYL TYPE, MODELS BUILT AUGUST 1976 SEASON&SINCE | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (D-59) - DEPTH CONTROL HYDRAULICS, CROSS, OPT WITH CESSNA HYD CYL TYPE, BUILT AUGUST 1976 SEASON AND SINCE | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (B-15) - HYDRAULIC CYLINDER AND CONNECTIONS, 6 AND 8 ROW | (568) - INTERNATIONAL HARVESTER SEED BED CONDITIONER (1/75-12/00) |
| (12-26) - ROCKSHAFT LIFT HYDRAULICS (PRIOR TO 1968) | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (12-27) - ROCKSHAFT LIFT HYDRAULICS (1968 & SINCE) | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (12-34) - WING LIFT HYDRAULICS (PRIOR TO 1968) | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (12-36) - WING LIFT HYDRAULICS (1968 & SINCE), (WHEN TRACTOR EQUIPPED | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (A-10) - BOOM LIFT HYD, MECH BCKT CNTRL, MODEL MF35 & MF50 1965 TO 1968 | (1501) - INTERNATIONAL LOADER (1/64-12/85) |
| (A-12) - HYDR SYSTEM, TRACTOR TO VALVE AND BOOM HYDR, MODEL 424 1966 TO 1972, MODEL 444 USA 1967 TO 1972 | (1501) - INTERNATIONAL LOADER (1/64-12/85) |
| (A-18) - HYDR SYSTEM, TRACTOR TO VALVE AND BOOM HYDR, MODEL B414 1967 TO 1972 | (1501) - INTERNATIONAL LOADER (1/64-12/85) |
| (A-20) - HYDR SYSTEM, TRACTOR TO VALVE AND BOOM HYDR, MODEL 276 1967 TO 1972, MODEL 434 1966 TO 1972 | (1501) - INTERNATIONAL LOADER (1/64-12/85) |
| (A-22) - HYDR SYSTEM, TRACTOR TO VALVE AND BOOM HYDR, MODEL MF35 & MF50 1965 TO 1968 | (1501) - INTERNATIONAL LOADER (1/64-12/85) |
| (A-24) - HYDR SYSTEM, TRACTOR TO VALVE AND BOOM HYDR, MODEL 424 1965 TO 1966 | (1501) - INTERNATIONAL LOADER (1/64-12/85) |
| (A-26) - HYDR SYSTEM, TRACTOR TO VALVE AND BOOM HYDR, MODEL 424 1966 TO 1972, MODEL 444USA 1967 TO 1972 | (1501) - INTERNATIONAL LOADER (1/64-12/85) |
| (C-14) - BOOM LIFT HYDRAULIC SYSTEM | (1850) - INTERNATIONAL LOADER (1/79-12/88) |
| (8-16) - HYDRAULIC LIFT SYSTEM TWO DRILL | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (8-26) - HYDRAULIC LIFT SYSTEM FOUR DRILL, 20 X 6, 24 X 6, 16 X 6, 28 X 6, 20 X 7, 24 X 7, 16 X 8 | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (8-04) - MARKER HYDRAULICS, HYDRAULIC SELECTOR, LEFT AND RIGHT MARKERS | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (8-06) - MARKER HYDRAULICS, HYDRAULIC SELECTOR, LEFT MARKER ONLY | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (8-04) - HYDRAULIC SYSTEM - LIFT, TWO DRILL COMBINATION - EARLY | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (8-16) - HYDRAULIC SYSTEM - LIFT, FOUR DRILL COMBINATION - EARLY | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (8-38) - HYDRAULIC SYSTEM - DISK MARKER, HYDRAULIC SELECTOR, LEFT AND | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (8-40) - HYDRAULIC SYSTEM - DISK MARKER, HYDRAULIC SELECTOR, LEFT | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (8-26) - GAUGE WHEEL LINES, RIGHT HAND GAUGE WHEEL CYLINDERS, W/ CESSNA GLAND TYPE CYLINDERS, 45' WIDE DRILL | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (8-28) - GAUGE WHEEL LINES, LEFT HAND GAUGE WHEEL CYLINDERS, WITH CESSNA GLAND TYPE CYLINDERS, 45' WIDE DRILL | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (8-32) - GAUGE WHEEL LINES, RIGHT HAND GAUGE WHEEL CYLINDERS, W/ CESSNA GLAND TYPE CYLINDERS, 33' WIDE DRILL | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (8-24) - HYDRAULIC CONTROL LINES, TO TRACK ERASER CYLINDERS | (8600) - CASE IH AIR DRILL (8/87-12/96) |
| (05-06) - WHEELS, HYDRAULIC CYLINDERS AND VALVE CONNECTIONS FOR CARRYING WHEELS UNITS C, D, E, M, S AND T | (800) - CASE IH PLANTER (1/77-12/86) |
| (05-54) - WHEELS, FOUR WHEEL DRIVE ATTACHMENT, UNITS B AND G | (800) - CASE IH PLANTER (1/77-12/86) |
| (8-016) - HYD. SYS., WING TYPE MODELS, DEPTH CONTROL, MASTER HYD. CYL. W/ DUAL FRONT PORTS, 22' 6" BASIC SIZE | (4500) - CASE IH VIBRA SHANK CULTIVATOR (1/91-12/98) |
| (8-018) - HYD. SYS., WING TYPE MODELS, DEPTH CONTROL, MASTER HYD. CYL. W/ DUAL FRONT PORTS, 31' 6" BASIC SIZE | (4500) - CASE IH VIBRA SHANK CULTIVATOR (1/91-12/98) |
| (8-020) - HYD. SYS., WING TYPE MODELS, DEPTH CTRL, MASTER HYD. CYL. W/ FRONT & REAR PORTS, 22' 6" BASIC SIZE | (4500) - CASE IH VIBRA SHANK CULTIVATOR (1/91-12/98) |
| (8-022) - HYD. SYS., WING TYPE MDLS., DEPTH CONTROL, MASTER HYD. CYL. W/ FRONT & REAR PORTS, 31' 6" BASIC SIZE | (4500) - CASE IH VIBRA SHANK CULTIVATOR (1/91-12/98) |
| (8-02) - DEPTH CONTROL HYDRAULICS 26 FOOT 3 INCH, 29 FOOT 5 INCH, 32 FOOT 7 INCH AND 35 FOOT 9 INCH | (696) - CASE IH TRAILER DISK HARROW (1/79-12/92) |
| (8-04) - DEPTH CONTROL HYDRAULICS 38 FOOT 11 INCH, 42 FOOT 1 INCH AND 45 FOOT 3 INCH | (696) - CASE IH TRAILER DISK HARROW (1/79-12/92) |
| (10-11) - HYDRAULICS, HYDRAULIC DIAGRAM, STEERING SYSTEM, SERIAL NO. 10000 AND BELOW | (1470) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/80-12/87) |
| (10-19) - HYDRAULICS, HYDRAULIC DIAGRAM, LEVELING SYSTEM, SERIAL NO. 10001 AND ABOVE | (1470) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/80-12/87) |
| (8-88) - LEVELING SYSTEM, VALVE TO CYLINDER | (1670) - CASE IH HILLSIDE COMBINE (1/89-12/91) |
| (185) - HYDRAULIC REEL DRIVE CHAIN REDUCTION | (403) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/63-12/72) |
| (224) - HYDRAULIC REEL DRIVE CHAIN REDUCTION, DIAGRAM | (503) - INTERNATIONAL HARVESTER COMBINE (1/62-12/69) |
| (227) - HYDRAULIC REEL DRIVE CHAIN REDUCTION, DIAGRAM, WITH HYDROSTATIC GROUND DRIVE | (503) - INTERNATIONAL HARVESTER COMBINE (1/62-12/69) |
| (313) - WINDROW PICKUP HYDRAULIC DRIVE DIAGRAM, BELT TYPE | (503) - INTERNATIONAL HARVESTER COMBINE (1/62-12/69) |
| (316) - WINDROW PICKUP HYDRAULIC DRIVE DIAGRAM, BELT TYPE, FOR HYDROSTATIC GROUND DRIVE | (503) - INTERNATIONAL HARVESTER COMBINE (1/62-12/69) |
| (208) - HYDRAULIC REEL DRIVE CHAIN REDUCTION DIAGRAM | (403) - INTERNATIONAL HARVESTER COMBINE (1/62-12/71) |
| (211) - HYDRAULIC REEL DRIVE CHAIN REDUCTION DIAGRAM, WITH HYDROSTATIC GROUND DRIVE | (403) - INTERNATIONAL HARVESTER COMBINE (1/62-12/71) |
| (295) - WINDROW PICKUP HYDRAULIC DRIVE DIAGRAM, BELT TYPE | (403) - INTERNATIONAL HARVESTER COMBINE (1/62-12/71) |
| (298) - WINDROW PICKUP HYDRAULIC DRIVE DIAGRAM, BELT TYPE, FOR HYDROSTATIC GROUND DRIVE | (403) - INTERNATIONAL HARVESTER COMBINE (1/62-12/71) |
| (8-02) - DRAPER DRIVE, REEL DRIVE AND DECK SHIFT HYDRAULICS, ADJUSTABLE OPENING 21, 25 AND 30 FOOT HEADERS | (6000) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/88) |
| (8-02) - DRAPER DRIVE, REEL DRIVE AND DECK SHIFT HYDRAULICS, ADJUSTABLE OPENING 21, 25 AND 30 FOOT HEADERS | (6500) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/90) |
| (N-04) - PARTS ACCESSORIES AND ATTACHMENTS, HYDRAULIC VARIATOR | (275) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (N-14) - PARTS ACCESSORIES AND ATTACHMENTS, VARIABLE SPEED REEL DRIVE | (275) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (F-16) - HYDRAULIC SYSTEM, RESERVOIR TO PUMP AND VALVE HYDRAULIC LINES | (275) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (F-20) - HYDRAULIC SYSTEM, RESERVOIR TO PUMP AND VALVE HYDRAULIC LINES | (275) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (N-14) - PARTS ACCESSORIES AND ATTACHMENTS, VARIABLE SPEED REEL DRIVE | (375) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (F-16) - HYDRAULIC SYSTEM, RESERVOIR TO PUMP AND VALVE HYDRAULIC LINES | (375) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (F-20) - HYDRAULIC SYSTEM, RESERVOIR TO PUMP AND VALVE HYDRAULIC LINES | (375) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (B-58) - HYDRAULIC END GATE, HYDRAULIC LINES, PRIOR TO 1976 SEASON | (570) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (B-60) - HYDRAULIC ENDGATE, HYDRAULIC LINES, ENDGATE BUILT 1976 AND SINCE | (570) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (8-02) - HYDRAULIC SYSTEM, END GATE | (575) - CASE IH MANURE SPREADER (1/90-12/91) |
| (B-58) - HYDRAULIC END GATE, HYDRAULIC LINES, PRIOR TO 1976 SEASON | (580) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (B-60) - HYDRAULIC ENDGATE, HYDRAULIC LINES, ENDGATE BUILT 1976 AND SINCE | (580) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (8-02) - HYDRAULIC SYSTEM, END GATE | (595) - CASE IH MANURE SPREADER (1/90-12/91) |
| (10-07) - HYDRAULICS, HYDRAULIC POWER STEERING AND CONNECTIONS, 4366 TRACTORS | (4366) - INTERNATIONAL 4WD DIESEL TRACTOR (1/73-12/76) |
| (172) - STEERING MECHANISM, POWER STEERING, FARMALL TRACTORS WITH 1/2 INCH OD TUBING | (504) - FARMALL DIESEL TRACTOR (1/61-12/68) |
| (174) - STEERING MECHANISM, POWER STEERING, HEAVY DUTY, FARMALL TRACTORS W/ADJUSTABLE TREAD FRONT AXLES | (504) - FARMALL DIESEL TRACTOR (1/61-12/68) |
| (172) - STEERING MECHANISM, POWER STEERING, FARMALL TRACTORS WITH 1/2 INCH OD TUBING | (504) - FARMALL GAS TRACTOR (1/60-12/68) |
| (174) - STEERING MECHANISM, POWER STEERING, HEAVY DUTY, FARMALL TRACTORS W/ADJUSTABLE TREAD FRONT AXLES | (504) - FARMALL GAS TRACTOR (1/60-12/68) |
| (176) - STEERING MECHANISM, POWER STEERING, INTERNATIONAL TRACTORS | (504) - INTERNATIONAL GAS TRACTOR (1/62-12/68) |
| (079) - STEERING MECHANISM, POWER STEERING, INTERNATIONAL SERIES WITH 1/2 INCH O.D. TUBING, 3676 UP | (2404) - INTERNATIONAL INDUSTRIAL TRACTOR (1/61-12/67) |
| (079) - STEERING MECHANISM, POWER STEERING, INTERNATIONAL SERIES WITH 1/2 INCH O.D. TUBING, 3676 UP | (404) - INTERNATIONAL TRACTOR (1/61-12/67) |
| (116) - STEERING MECHANISM, POWER STEERING | (606) - INTERNATIONAL GAS TRACTOR (1/62-12/67) |
| (172) - STEERING MECHANISM, POWER STEERING, FARMALL TRACTORS WITH 1/2 INCH OD TUBING | (2504) - INTERNATIONAL TRACTOR (1/62-12/68) |
| (174) - STEERING MECHANISM, POWER STEERING, HEAVY DUTY, FARMALL TRACTORS W/ADJUSTABLE TREAD FRONT AXLES | (2504) - INTERNATIONAL TRACTOR (1/62-12/68) |
| (176) - STEERING MECHANISM, POWER STEERING, INTERNATIONAL TRACTORS | (2504) - INTERNATIONAL TRACTOR (1/62-12/68) |
| (116) - STEERING MECHANISM, POWER STEERING | (2606) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/62-12/67) |
| (176) - STEERING MECHANISM, POWER STEERING, INTERNATIONAL TRACTORS | (504) - INTERNATIONAL DIESEL TRACTOR (1/62-12/68) |
| (075) - STEERING MECHANISM, POWER STEERING, FARMALL SERIES TRACTORS WITH 1/2 INCH O.D. TUBING, 1814 UP | (404) - FARMALL TRACTOR (1/61-12/67) |
