| Узел | Модель |
|---|
| (40) - PICKUP GAUGE WHEELS | (3440) - CASE IH ROUND BALER (1/87-12/87) |
| (70) - LEFT AND RIGHT GAUGE WHEEL, PRIOR TO P.I.N. 000800 | (3450) - CASE IH ROUND TIE BALER (1/83-12/89) |
| (72) - LEFT AND RIGHT GAUGE WHEEL, P.I.N. 000801 THROUGH 001280 | (3450) - CASE IH ROUND TIE BALER (1/83-12/89) |
| (74) - LEFT AND RIGHT GAUGE WHEEL, P.I.N. 001281 AND AFTER | (3450) - CASE IH ROUND TIE BALER (1/83-12/89) |
| (44) - PICKUP GAUGE WHEELS | (3640) - CASE IH ROUND BALER (1/86-12/87) |
| (64) - LEFT AND RIGHT GAUGE WHEEL, PRIOR TO P.I.N. 000755 | (3650) - CASE IH ROUND TIE BALER (1/84-12/88) |
| (66) - LEFT AND RIGHT GAUGE WHEEL, P.I.N. 000756 THROUGH 001531 | (3650) - CASE IH ROUND TIE BALER (1/84-12/88) |
| (68) - LEFT AND RIGHT GAUGE WHEEL, P.I.N. 001531 AND AFTER | (3650) - CASE IH ROUND TIE BALER (1/84-12/88) |
| (D-06) - WHEELS AND AXLES | (420) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/71-12/76) |
| (A-16[A]) - PICKUP WHEEL 428 SERIAL NO. 701 AND ABOVE 435 SERIAL NO. 6001 AND ABOVE 445 TWINE SERIAL NO. 3001 AND ABOVE 445 WIRE SERIAL NO. 2001 AND ABOVE | (428) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/76-12/88) |
| (E-07) - WHEELS AND AXLE, FLOTATION TIRES | (430) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/70-12/78) |
| (E-08) - WHEELS AND AXLES | (430) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/70-12/78) |
| (A-16[A]) - PICKUP WHEEL 428 SERIAL NO. 701 AND ABOVE 435 SERIAL NO. 6001 AND ABOVE 445 TWINE SERIAL NO. 3001 AND ABOVE 445 WIRE SERIAL NO. 2001 AND ABOVE | (435) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/78-12/88) |
| (F-08) - WHEELS AND AXLES, FLOTATION TIRES | (440) - INTERNATIONAL HARVESTER CUSTOM RECTANGULAR BALER (1/70-12/78) |
| (E-07) - WHEELS AND AXLE, FLOTATION TIRES | (440) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/70-12/78) |
| (E-08) - WHEELS AND AXLES | (440) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/70-12/78) |
| (A-16[A]) - PICKUP WHEEL 428 SERIAL NO. 701 AND ABOVE 435 SERIAL NO. 6001 AND ABOVE 445 TWINE SERIAL NO. 3001 AND ABOVE 445 WIRE SERIAL NO. 2001 AND ABOVE | (445) - INTERNATIONAL HARVESTER RECTANGULAR BALER (NORTH AMERICA) (1/76-12/88) |
| (07[1]) - FORECARRIAGE AXLE AND HUB | (150) - INTERNATIONAL HARVESTER SHOVEL PRESS DRILL (1/60-12/88) |
| (64) - MULTIPLE DRILL DISK MARKER, FOR USE W/10X8, 10X10 & 8X12 DRILLS WHEN DUPLEXED OR TRIPLEXED | (150) - INTERNATIONAL HARVESTER SHOVEL PRESS DRILL (1/60-12/88) |
| (A-06) - TRACTOR HITCH AND JACK, ALL SIZE DRILLS | (510) - INTERNATIONAL HARVESTER END WHEEL GRAIN DRILL (1/68-12/79) |
| (A-22) - STRAIGHT AXLE AND PRIMARY DRIVE | (510) - INTERNATIONAL HARVESTER END WHEEL GRAIN DRILL (1/68-12/79) |
| (A-24) - TILT AXLE AND PRIMARY DRIVE, 20 X 8 AND 16 X 10 PLAIN GRAIN DRILL WITH 40" BEDDED CROP AND 15" WHEEL | (510) - INTERNATIONAL HARVESTER END WHEEL GRAIN DRILL (1/68-12/79) |
| (B-03) - CASTER WHEEL AXLE AND HUB | (510) - INTERNATIONAL HARVESTER SEMI-MOUNTED GRAIN DRILL (1/68-12/79) |
| (048) - HITCH, CONT'D | (5100) - CASE IH END WHEEL GRAIN DRILL (1/88-12/90) |
| (060) - TWO DRILL HITCH, CASTER WHEEL | (5100) - CASE IH END WHEEL GRAIN DRILL (1/88-12/90) |
| (072) - AXLE DRIVE | (5100) - CASE IH END WHEEL GRAIN DRILL (1/88-12/90) |
| (076) - AXLE DRIVE, CONT'D | (5100) - CASE IH END WHEEL GRAIN DRILL (1/88-12/90) |
| (148) - DISC MARKER, HYDRAULICALLY CONTROLLED | (5100) - CASE IH END WHEEL GRAIN DRILL (1/88-12/90) |
| (150) - DISC MARKER, HYDRAULICALLY CONTROLLED, CONT'D | (5100) - CASE IH END WHEEL GRAIN DRILL (1/88-12/90) |
| (168) - DEPTH PRESS WHEEL | (5100) - CASE IH END WHEEL GRAIN DRILL (1/88-12/90) |
| (D-03) - CASTER WHEEL AXLE AND HUB | (5100) - INTERNATIONAL HARVESTER SEMI-MOUNTED GRAIN DRILL (1/68-12/79) |
| (62) - DEPTH PRESS WHEEL | (5200) - CASE IH GRAIN DRILL (3/90-12/90) |
| (A-43) - PRESS WHEEL GANG REAR SUSPENSION, 14 X 6, 16 X 6 AND 14 X 7 | (620) - INTERNATIONAL HARVESTER GRAIN DRILL (1/80-12/88) |
| (A-59) - CASTER WHEEL AXLE, 14 X 6, 16 X 6, 14 X 7 | (620) - INTERNATIONAL HARVESTER GRAIN DRILL (1/80-12/88) |
| (C-02) - ENDWISE TRANSPORT, FRAME AND HITCH, LEADING MACHINE | (620) - INTERNATIONAL HARVESTER GRAIN DRILL (1/80-12/88) |
| (C-04) - ENDWISE TRANSPORT, FRAME, SECOND OR THIRD MACHINE | (620) - INTERNATIONAL HARVESTER GRAIN DRILL (1/80-12/88) |
| (C-06) - ENDWISE TRANSPORT, FRAME, TRAILING MACHINE WITH CASTER WHEEL | (620) - INTERNATIONAL HARVESTER GRAIN DRILL (1/80-12/88) |
| (AB-08) - HYDRAULIC MARKER ATTACHMENT | (326) - INTERNATIONAL HARVESTER PLANTER CARRIER (1/69-12/88) |
| (A-080[B]) - MOUNTING COMPLETING PACKAGE, TO ADAPT NO. 5 COMBINED TILLAGE HITCH TO 153 SERIES 4 ROW WIDE AND 6 ROW NARROW AND 163 SERIES 4 ROW CULTIVATORS, NOT FOR USE WITH CATEGORY 1 COMPLETING PACKAGE | (400) - INTERNATIONAL HARVESTER CYCLO PLANTER (1/71-12/80) |
| (A-086) - SPRING TOOTH HARROW ATTACHMENT, FOR 4 ROW AND 6 ROW NARROW | (400) - INTERNATIONAL HARVESTER CYCLO PLANTER (1/71-12/80) |
| (YA-20) - HOPPER, SUPPORTS AND DRIVE UNIT | (400) - INTERNATIONAL HARVESTER CYCLO PLANTER (1/71-12/80) |
| (YA-20) - HOPPER, SUPPORTS AND DRIVE UNIT | (500) - INTERNATIONAL HARVESTER CYCLO FLEX FRAME PLANTER (1/77-12/81) |
| (YA-20) - HOPPER, SUPPORTS AND DRIVE UNIT | (500) - INTERNATIONAL HARVESTER CYCLO FOLDING FRAME PLANTER (1/77-12/80) |
| (YA-20) - HOPPER, SUPPORTS AND DRIVE UNIT | (500) - INTERNATIONAL HARVESTER CYCLO PLANTER (1/73-12/77) |
| (N-81) - SPRING TOOTH HARROW ATTACHMENT, FOR 4 ROW PLANTERS, BUILT 1967 TO 1974 | (56-SERIES) - INTERNATIONAL HARVESTER PLANTERS (1/65-12/80) |
| (P-59) - SPRING TOOTH HARROW ATTACHMENT, FOR 4 AND 6 ROW PLANTERS, 1967 AND SINCE | (58-SERIES) - INTERNATIONAL HARVESTER PLANTERS (1/65-12/74) |
| (U-69) - SPRING TOOTH HARROW ATTACHMENT, FOR 4 ROW PLANTERS, 1967 AND SINCE | (66-SERIES) - INTERNATIONAL HARVESTER COTTON & CORN PLANTER (1/70-12/74) |
| (R-21) - AUTOMATIC MARKER, DISK TYPE, FOUR AND SIX ROW | (90) - INTERNATIONAL HARVESTER PLANTER (12/70-12/70) |
| (B-29) - MULTIPLE DRILL DISK MARKER ATTACHING PARTS | (100) - INTERNATIONAL HARVESTER PRESS DRILL (1/67-12/69) |
| (B-39) - SPRING CUSHION HITCH, 1965 SEASON AND SINCE | (100) - INTERNATIONAL HARVESTER PRESS DRILL (1/67-12/69) |
| (B-42) - SPRING CUSHION HITCH | (100) - INTERNATIONAL HARVESTER PRESS DRILL (1/67-12/69) |
| (A-07) - HITCHES | (80) - INTERNATIONAL HARVESTER TOOL BAR (1/65-12/70) |
| (YA-20) - HOPPER, SUPPORTS AND DRIVE UNIT | (92) - INTERNATIONAL HARVESTER CYCLO LISTER PLANTER (1/80-12/88) |
| (9-10) - PEG TOOTH MULCHER | (CASE IH) - MULCHER ATTACHMENTS (1/92-12/00) |
| (G-04) - 5000 VIBRA CHISEL, TRAIL BEHIND, MAIN FRAME AXLES | (5000) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/79-12/88) |
| (G-05) - 5000 VIBRA CHISEL, TRAIL BEHIND, WHEEL AND HUB | (5000) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/79-12/88) |
| (H-08) - 5000 VIBRA CHISEL, 31-1/2 FOOT WING, WING FRAME AXLE | (5000) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/79-12/88) |
| (H-09) - 5000 VIBRA CHISEL, 31-1/2 FOOT WING, WHEEL AND HUB, WING FRAME | (5000) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/79-12/88) |
| (H-10) - 5000 VIBRA CHISEL, 31-1/2 FOOT WING, WING LIFT UNIT, WITH 7/8 DIAMETER WING LIFT CONTROL ROD | (5000) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/79-12/88) |
| (J-06[A]) - 5000 VIBRA CHISEL, 17 FOOT WING, WING FRAME AXLE | (5000) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/79-12/88) |
| (J-08) - 5000 VIBRA CHISEL, 17 FOOT WING, WHEEL AND HUB, WING FRAME | (5000) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/79-12/88) |
| (B-07[A]) - HUB AND CONNECTIONS, 7 FOOT AND 11 FOOT TWO RANK, 7 FOOT AND 13 FOOT THREE RANK MODEL | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (B-08) - GAUGE WHEEL MOUNTING PARTS, CRANK ADJUSTABLE TYPE | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (B-12) - TRANSPORT WHEEL, 17 FOOT AND 21 FOOT TWO RANK ROW CROP, MACHINES BUILT PRIOR TO 1973 SEASON | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (C-21) - 55 CONSER-TILL GANG SUPPORT, 10 FOOT AND 13 FOOT MODELS | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (E-05) - OUTER WHEEL AND HUB | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (E-09) - ROCKSHAFT UNIT, BUILT PRIOR TO JUNE, 1976 AND WITH IDENTIFICATION PLATE C111 AND C1121 | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (F-16) - HAND WINCH WING LIFT, MACHINES BUILT PRIOR TO MAY, 1974 | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (B-08) - GAUGE WHEEL AND HUB, DIRECT MOUNTED, FOUR BOLT WHEEL MOUNTING | (5500) - INTERNATIONAL HARVESTER CHISEL PLOW (1/79-12/87) |
| (B-10) - GAUGE WHEEL MOUNTING PARTS, DIRECT MOUNTED, CRANK ADJUSTABLE TYPE | (5500) - INTERNATIONAL HARVESTER CHISEL PLOW (1/79-12/87) |
| (B-04[A]) - 645 VIBRA CHISEL, TRAIL BEHIND, WEIGHT TRANSFER SUPPORT STRAP, PRIOR TO JUNE 1973 SEASON | (645) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/77-12/79) |
| (B-05) - 645 VIBRA CHISEL, TRAIL BEHIND, WHEEL AND HUB | (645) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/77-12/79) |
| (C-09) - 645 VIBRA CHISEL, 31-1/2 FOOT WING, WHEEL AND HUB, WING FRAME | (645) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/77-12/79) |
| (C-10) - 645 VIBRA CHISEL, 31-1/2 FOOT WING, WING LIFT UNIT | (645) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/77-12/79) |
| (D-09) - 645 VIBRA CHISEL, 18 FOOT WING, WHEEL AND HUB, WING FRAME | (645) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/77-12/79) |
| (D-11) - 645 VIBRA CHISEL, 18 FOOT WING, HAND WINCH WING LIFT, MACHINES BUILT PRIOR TO MAY 1974 | (645) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/77-12/79) |
| (E-6) - 645 VIBRA CHISEL, DIRECT MOUNTED, GAUGE WHEEL MOUNTING PARTS | (645) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/77-12/79) |
| (E-7) - 645 VIBRA CHISEL, DIRECT MOUNTED, WHEEL AND HUB | (645) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/77-12/79) |
| (AL-05) - PARALLEL LINKAGE | (1269) - INTERNATIONAL HARVESTER BEET & BEAN CULTIVATOR (1/63-12/68) |
| (P-04) - FIRST GANG PARALLEL LINKAGE, BUILT 1956 TO 1960 | (261) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (P-05) - SECOND GANG PARALLEL LINKAGE | (261) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (P-06) - THIRD GANG PARALLEL LINKAGE | (261) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (P-07) - FOURTH GANG PARALLEL LINKAGE | (261) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (P-08) - FIRST GANG PARALLEL LINKAGE, BUILT 1960 AND SINCE | (261) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (Q-03[A]) - COUPLING BEAMS | (263) - INTERNATIONAL HARVESTER 2-ROW CULTIVATOR (1/58-12/68) |
| (Q-05) - ROLLING GUIDE FIN, FLEXIBLE | (263) - INTERNATIONAL HARVESTER 2-ROW CULTIVATOR (1/58-12/68) |
| (Q-08) - PARALLEL LINKAGE | (263) - INTERNATIONAL HARVESTER 2-ROW CULTIVATOR (1/58-12/68) |
| (R-03) - FIRST GANG PARALLEL LINKAGE | (266) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (R-04) - SECOND GANG PARALLEL LINKAGE | (266) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (S-02) - MAIN FRAME | (268) - INTERNATIONAL HARVESTER CULTIVATOR (1/61-12/69) |
| (S-04) - SECOND GANG PARALLEL LINKAGE | (268) - INTERNATIONAL HARVESTER CULTIVATOR (1/61-12/69) |
| (S-05) - THIRD GANG PARALLEL LINKAGE | (268) - INTERNATIONAL HARVESTER CULTIVATOR (1/61-12/69) |
| (S-06) - FOURTH GANG PARALLEL LINKAGE | (268) - INTERNATIONAL HARVESTER CULTIVATOR (1/61-12/69) |
| (D-06) - BEAM AND SHANK W/GAUGE WHEELS | (43) - INTERNATIONAL HARVESTER CULTIVATOR (1/67-12/68) |
| (B-13) - PNEUMATIC GAUGE WHEEL AND HUB | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (B-14) - STEEL GAUGE WHEEL, PRIOR TO 1973 SEASON | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (C-05) - AXLE AND CONNECTIONS, SERIAL NO 5526 AND SINCE | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (C-06) - WHEEL AND HUB | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (D-09) - WHEEL AND HUB, WING FRAME | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (D-11) - WHEEL AND HUB, GAUGE WHEEL | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (D-19) - HAND WINCH WING LIFT, NOT FOR USE W/MULCHERS, 22' 6" MODEL BUILT 1969 SEASON TO MAY 1974 SEASON | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (D-24) - WING LIFT UNIT, 22 FOOT 6 INCH MODEL BUILT AUGUST, 1976 SEASON AND SINCE | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (D-26) - WING LIFT UNIT, 31 FOOT 6 INCH MODEL BUILT AUGUST, 1976 SEASON AND SINCE | (45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81) |
| (A-05) - 4600 VIBRA SHANK, WING TYPE, MAIN FRAME ROCKSHAFT WITH AXLES AND DEPTH CONTROL, | (4600) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/83-12/88) |
| (A-07) - 4600 VIBRA SHANK, WING TYPE,MAIN FRAME ROCKSHAFT WITH AXLES AND DEPTH OCNTROL, | (4600) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/83-12/88) |
| (A-08) - 4600 VIBRA SHANK, WING TYPE, MAIN FRAME WHEEL AND HUB | (4600) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/83-12/88) |
| (A-09) - 4600 VIBRA SHANK, WING TYPE, WING FRAME ROCKSHAFT WITH DEPTH CONTROL SINGLE AXLE | (4600) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/83-12/88) |
| (A-10) - 4600 VIBRA SHANK, WING TYPE, WING FRAME WHEEL AND HUB SINGLE AXLE FOR 22.9, 24.0, 25.1 & 26.2' SIZES | (4600) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/83-12/88) |
| (A-11) - 4600 VIBRA SHANK, WING TYPE, WING FRAME ROCKSHAFT WITH DEPTH CONTROL DUAL AXLE | (4600) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/83-12/88) |
| (A-12) - 4600 VIBRA SHANK, WING TYPE, WING FRAME ROCKSHAFT WITH DEPTH CONTROL DUAL AXLE | (4600) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/83-12/88) |
| (A-13) - 4600 VIBRA SHANK,WING TYPE,WING FRAME WHEEL AND HUB,DUAL WHEEL AXLES FOR 27.3,28.4,29.6 &30.7' SIZES | (4600) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/83-12/88) |
| (U-04[A]) - FIRST GANG PARALLEL LINKAGE, BUILT 1956 TO 1960 | (461) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (U-04) - MAIN FRAME AND ROCKSHAFT | (461) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (U-06) - SECOND GANG PARALLEL LINKAGE | (461) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (U-07) - THIRD GANG PARALLEL LINKAGE | (461) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (U-08) - FOURTH GANG PARALLEL LINKAGE | (461) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (U-09) - FIRST GANG PARALLEL LINKAGE, BUILT 1960 AND SINCE | (461) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (V-05) - ROLLING GUIDE FIN, FLEXIBLE | (463) - INTERNATIONAL HARVESTER REAR-MOUNTED CULTIVATOR (1/57-12/95) |
| (V-06) - COUPLING BEAMS | (463) - INTERNATIONAL HARVESTER REAR-MOUNTED CULTIVATOR (1/57-12/95) |
| (V-11) - PARALLEL LINKAGE | (463) - INTERNATIONAL HARVESTER REAR-MOUNTED CULTIVATOR (1/57-12/95) |
| (W-05) - FIRST GANG PARALLEL LINKAGE | (465A) - INTERNATIONAL HARVESTER 4-ROW CULTIVATOR (1/58-12/66) |
| (W-06) - SECOND GANG PARALLEL LINKAGE | (465A) - INTERNATIONAL HARVESTER 4-ROW CULTIVATOR (1/58-12/66) |
| (W-07) - THIRD GANG PARALLEL LINKAGE | (465A) - INTERNATIONAL HARVESTER 4-ROW CULTIVATOR (1/58-12/66) |
| (W-08) - FOURTH GANG PARALLEL LINKAGE | (465A) - INTERNATIONAL HARVESTER 4-ROW CULTIVATOR (1/58-12/66) |
| (W-10) - FIRST GANG PARALLEL LINKAGE, BUILT 1960 AND SINCE | (465A) - INTERNATIONAL HARVESTER 4-ROW CULTIVATOR (1/58-12/66) |
| (W-21[B]) - ADAPTING UNIT PARTS REQUIRED TO CHANGE CULTIVATOR OR FRAME TO MIDDLEBUSTER FRAME | (465A) - INTERNATIONAL HARVESTER 4-ROW CULTIVATOR (1/58-12/66) |
| (X-03) - THIRD GANG PARALLEL LINKAGE | (466) - INTERNATIONAL HARVESTER COTTON & CORN CULTIVATOR (1/58-12/68) |
| (X-04) - FOURTH GANG PARALLEL LINKAGE | (466) - INTERNATIONAL HARVESTER COTTON & CORN CULTIVATOR (1/58-12/68) |
| (Y-02) - MAIN FRAME | (468) - INTERNATIONAL HARVESTER 4-ROW CULTIVATOR (1/61-1/66) |
| (Y-04) - MAIN FRAME | (468) - INTERNATIONAL HARVESTER 4-ROW CULTIVATOR (1/61-1/66) |
| (Y-05) - SECOND GANG PARALLEL LINKAGE | (468) - INTERNATIONAL HARVESTER 4-ROW CULTIVATOR (1/61-1/66) |
| (Y-06) - THIRD GANG PARALLEL LINKAGE | (468) - INTERNATIONAL HARVESTER 4-ROW CULTIVATOR (1/61-1/66) |
| (Y-07) - FOURTH GANG PARALLEL LINKAGE | (468) - INTERNATIONAL HARVESTER 4-ROW CULTIVATOR (1/61-1/66) |
| (F-14) - ROLLING GUIDE FIN, FLEXIBLE | (53) - INTERNATIONAL HARVESTER REAR-MOUNTED CULTIVATOR (1/65-12/69) |
| (G-11[A]) - COUPLING BEAM | (63-SERIES) - INTERNATIONAL HARVESTER CULTIVATOR (1/65-12/72) |
| (G-11) - ROLLING GUIDE FIN, FLEXIBLE | (63-SERIES) - INTERNATIONAL HARVESTER CULTIVATOR (1/65-12/72) |
| (G-12[A]) - COUPLING BEAMS | (63-SERIES) - INTERNATIONAL HARVESTER CULTIVATOR (1/65-12/72) |
| (G-12) - COUPLING BEAM | (63-SERIES) - INTERNATIONAL HARVESTER CULTIVATOR (1/65-12/72) |
| (G-20[A]) - DISK HILLER 13 IN. | (63-SERIES) - INTERNATIONAL HARVESTER CULTIVATOR (1/65-12/72) |
| (G-20) - PARALLEL LINKAGE | (63-SERIES) - INTERNATIONAL HARVESTER CULTIVATOR (1/65-12/72) |
| (H-14) - THIRD, FOURTH, FIFTH, SIXTH, SEVENTH AND EIGHT GANG PARALLEL | (65) - INTERNATIONAL HARVESTER FRONT-MOUNTED CULTIVATOR (1/65-12/68) |
| (AB-05) - FIRST GANG PARALLEL LINKAGE | (661) - INTERNATIONAL HARVESTER CULTIVATOR (1/57-12/68) |
| (AB-06) - SECOND GANG PARALLEL LINKAGE | (661) - INTERNATIONAL HARVESTER CULTIVATOR (1/57-12/68) |
| (AB-07) - THIRD GANG PARALLEL LINKAGE | (661) - INTERNATIONAL HARVESTER CULTIVATOR (1/57-12/68) |
| (AB-08) - FOURTH GANG PARALLEL LINKAGE | (661) - INTERNATIONAL HARVESTER CULTIVATOR (1/57-12/68) |
| (AB-20) - ADAPTING UNIT, PARTS REQUIRED TO CHANGE CULTIVATOR OR FRAME TO MIDDLEBUSTER FRAME | (661) - INTERNATIONAL HARVESTER CULTIVATOR (1/57-12/68) |
| (AC-08) - PARALLEL LINKAGE | (662) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (AD-07[A]) - COUPLING BEAMS | (663) - INTERNATIONAL HARVESTER CULTIVATOR (1/59-12/68) |
| (AD-13) - PARALLEL LINKAGE | (663) - INTERNATIONAL HARVESTER CULTIVATOR (1/59-12/68) |
| (AD-16) - ROLLING GUIDE FIN, FLEXIBLE | (663) - INTERNATIONAL HARVESTER CULTIVATOR (1/59-12/68) |
| (AE-05) - FIRST GANG PARALLEL LINKAGE, BUILT 1958 TO 1960 | (665A) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (AE-06) - SECOND GANG PARALLEL LINKAGE | (665A) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (AE-07) - THIRD GANG PARALLEL LINKAGE | (665A) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (AE-08) - FOURTH GANG PARALLEL LINKAGE | (665A) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (AE-10) - FIRST GANG PARALLEL LINKAGE, BUILT 1960 AND SINCE | (665A) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (AE-20[B]) - ADAPTING UNIT PARTS REQUIRED TO CHANGE CULTIVATOR OR FRAME TO MIDDLEBUSTER FRAME | (665A) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-12/68) |
| (AF-08) - PARALLEL LINKAGE | (667) - INTERNATIONAL HARVESTER CULTIVATOR (1/58-1/61) |
| (AG-02) - FRONT FRAME | (669) - INTERNATIONAL HARVESTER CULTIVATOR (1/61-12/68) |
| (AG-04) - PARALLEL LINKAGE | (669) - INTERNATIONAL HARVESTER CULTIVATOR (1/61-12/68) |
| (J-02) - MAIN FRAME | (68) - INTERNATIONAL HARVESTER CULTIVATOR (1/57-12/68) |
| (J-04) - MAIN FRAME | (68) - INTERNATIONAL HARVESTER CULTIVATOR (1/57-12/68) |
| (J-07) - SECOND GANG PARALLEL LINKAGE | (68) - INTERNATIONAL HARVESTER CULTIVATOR (1/57-12/68) |
| (J-08) - THIRD GANG PARALLEL LINKGAGE | (68) - INTERNATIONAL HARVESTER CULTIVATOR (1/57-12/68) |
| (J-09) - FOURTH GANG PARALLEL LINKGAGE | (68) - INTERNATIONAL HARVESTER CULTIVATOR (1/57-12/68) |
| (K-2) - GANG AND DISK PITCH EXTENSION ATTACHMENT | (70) - INTERNATIONAL HARVESTER REAR-MOUNTED LISTER CULTIVATOR (1/67-12/68) |
| (AM-11[A]) - HYDRAULIC EQUIPMENT | (78) - INTERNATIONAL HARVESTER FRONT-MOUNTED CULTIVATOR (1/67-12/68) |
| (A-07) - HITCHES | (80) - INTERNATIONAL HARVESTER LISTER (1/66-12/70) |
| (A-07) - HITCHES | (80) - INTERNATIONAL HARVESTER MIDDLEBUSTER (1/65-12/70) |
| (B-07) - SPROCKETS, GEARS AND SHAFTS FOR PLANTING | (82-SERIES) - INTERNATIONAL HARVESTER LISTER (1/70-12/86) |
| (B-27) - MARKER ATTACHMENT | (82-SERIES) - INTERNATIONAL HARVESTER LISTER (1/70-12/86) |
| (B-30) - ALTERNATOR MARKER, 4, 6 AND 8 ROW LISTERS OR 4 AND 6 ROW, TOOLBARS AND MIDDLEBUSTERS | (82-SERIES) - INTERNATIONAL HARVESTER LISTER (1/70-12/86) |
| (AN-13[A]) - HYDRAULIC CONNECTIONS | (85) - INTERNATIONAL HARVESTER CULTIVATOR (1/68-12/92) |
| (AJ-06[A]) - COUPLING BEAMS | (863) - INTERNATIONAL HARVESTER CULTIVATOR (1/64-12/68) |
| (AJ-10) - PARALLEL LINKAGE | (863) - INTERNATIONAL HARVESTER CULTIVATOR (1/64-12/68) |
| (AJ-12[A]) - ROLLING GUIDE FIN FLEXIBLE | (863) - INTERNATIONAL HARVESTER CULTIVATOR (1/64-12/68) |
| (AK-14) - THIRD, FOURTH, FIFTH, SIXTH, SEVENTH AND EIGTH GANG PARALLEL | (865) - INTERNATIONAL HARVESTER FRONT-MOUNTED CULTIVATOR (1/60-12/68) |
| (A-04) - REAR SECTIONS, TOOL BAR AND COUPLING BEAM | (INTERNATIONAL) - HARVESTER CULTIVATOR REAR SECTIONS (1/58-12/68) |
| (10-23[A]) - GRAIN SEEDING TUBE HOLDER | (300) - INTERNATIONAL HARVESTER DISKALL (1/67-12/77) |
| (37[1]) - GRAIN SEEDING TUBE HOLDER | (300) - INTERNATIONAL HARVESTER DISKALL PLOW (1/54-12/81) |
| (N-04) - HITCH | (330) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/75) |
| (N-05) - WHEEL AXLE, HUB AND WHEEL | (330) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/75) |
| (P-04) - MAIN FRAME AND RELATED PARTS | (470) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/75) |
| (P-05) - HITCH | (470) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/75) |
| (P-08) - BEARING, DISK AND GANG | (470) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/75) |
| (S-03) - MAIN FRAME | (480) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/86) |
| (S-05) - HITCH | (480) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/86) |
| (S-08) - BEARING, DISK AND GANG | (480) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/86) |
| (S-14) - FLEXI-GANG | (480) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/86) |
| (Q-02) - MAIN FRAME AND RELATED PARTS | (500) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/88) |
| (Q-03) - HITCH, 1965 TO 1969 | (500) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/88) |
| (Q-05) - HITCH, 1969 AND SINCE | (500) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/88) |
| (Q-08) - FRONT AND REAR GANGS AND DISK, 1965 TO 1971 | (500) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/88) |
| (Q-11) - FRONT AND REAR GANGS AND DISK, 1971 AND SINCE | (500) - INTERNATIONAL HARVESTER DISK HARROW (1/65-12/88) |
| (AC-03) - HITCH | (610) - INTERNATIONAL HARVESTER OFFSET DISH HARROW (1/69-12/73) |
| (AH-6) - GAUGE WHEELS | (345) - INTERNATIONAL HARVESTER SPRING-TOOTH HARROW (1/73-12/75) |
| (AA-6) - TRANSPORT WHEELS | (380) - INTERNATIONAL HARVESTER SPRING-TOOTH HARROW (1/68-12/74) |
| (A-13) - DRAWBAR, 4 SECTION FOLDING, 1965 AND SINCE | (7) - INTERNATIONAL HARVESTER PEG-TOOTH HARROW (1/58-12/74) |
| (07-15) - TRANSPORT WHEEL ATTACHMENT | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (07-17[A]) - GAUGE WHEEL AXLE & SPINDLE (SLIDE ADJUSTING TYPE) | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (07-19) - GAUGE WHEEL AXLE MOUNTING (CRANK ADJUSTABLE TYPE) | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (07-20) - CRANK ADJUSTING GAUGE WHEEL | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (12-18) - HAND WINCH WING LIFT (SPECIAL) | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (13-03) - OUTER WHEEL AXLE & HUB | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (13-04) - ROCKSHAFT | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (R-5) - DRAWBAR, 4-SECTION-FOLDING | (9 COIL) - MCCORMICK-INTERNATIONAL SPRING-TOOTH HARROW (1/68-12/72) |
| (A-09) - HITCH, FOLDING, UNITS D AND E | (315) - INTERNATIONAL HARVESTER PACKER-MULCHER (1/69-12/79) |
| (AT-7) - REAR FURROW WHEEL, SPRING LOADED, PRODUCT GRAPHICS | (440) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/74-12/80) |
| (AH-13) - STEERABLE WHEEL UNIT | (535) - INTERNATIONAL HARVESTER 3-FURROW MOLDBOARD PLOW (1/66-12/72) |
| (A-11) - ROCKSHAFT, 15 FOOT | (60) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/78-12/79) |
| (A-14) - GANG SUPPORT, 10 AND 13 FOOT | (60) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/78-12/79) |
| (A-15) - GANG SUPPORT, 15 FOOT | (60) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/78-12/79) |
| (A-16[A]) - WEIGHT SUPPORT SEPTEMBER 1981 & SINCE | (60) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/78-12/79) |
| (A-11) - ROCKSHAFT, 15 FOOT | (6000) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/79-12/88) |
| (A-14) - GANG SUPPORT, 10 AND 13 FOOT | (6000) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/79-12/88) |
| (A-15) - GANG SUPPORT, 15 FOOT | (6000) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/79-12/88) |
| (A-16[A]) - WEIGHT SUPPORT SEPTEMBER 1981 & SINCE | (6000) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/79-12/88) |
| (B-11) - GANG SUPPORT | (6500) - INTERNATIONAL HARVESTER CONSER-TILL PLOW (1/87-12/97) |
| (AG-18) - TWO POINT FAST HITCH UNIT, 656, 706, 756, 806, 856 TRACTORS | (700) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/65-12/70) |
| (AG-19) - ON THE LAND HITCH, TRACTORS WITH FIXED DRAWBAR | (700) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/65-12/70) |
| (AG-22) - LAND HITCH | (700) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/65-12/70) |
| (AG-23) - FURROW HITCH | (700) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/65-12/70) |
| (AG-24) - FURROW SHIFTING HITCH | (700) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/65-12/70) |
| (AK-15) - HITCH | (700) - INTERNATIONAL HARVESTER TRAILING MOLDBOARD PLOW (1/68-12/75) |
| (AP-07) - MAIN FRAME, 5 TO 6 AND 6 FURROW NON-EXTENDABLE, ON THE LAND | (710) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/70-12/76) |
| (AG-02) - CENTER FRAME, WING & BEARINGS, MACHINES BUILT 1973 TO 1975, MACHINES WITH 2 X 1-1/2" SCRAPER ANGLES | (490) - INTERNATIONAL HARVESTER TANDEM DISK HARROW (1/73-12/81) |
| (AG-04) - CENTER FRAME, WING & BEARINGS, MACHINES BUILT 1976 & SINCE, MACHINES WITH 2 X 2" SCRAPER ANGLES | (490) - INTERNATIONAL HARVESTER TANDEM DISK HARROW (1/73-12/81) |
| (AG-14) - BEARINGS, DISKS AND GANGS, MACHINES W/SERIAL NO. 16678 AND ABOVE | (490) - INTERNATIONAL HARVESTER TANDEM DISK HARROW (1/73-12/81) |
| (A-12) - WING FRAME ROCKSHAFT WITH AXLE AND DEPTH CONTROL, MACHINES W/AXLE PIVOT THRU ROCKSHAFT TUBE | (4700) - INTERNATIONAL HARVESTER VIBRA TILLER (1/82-12/87) |
| (A-14) - WING FRAME ROCKSHAFT WITH AXLE AND DEPTH CONTROL, MACHINES W/AXLE PIVOT THRU AXLE TUBE | (4700) - INTERNATIONAL HARVESTER VIBRA TILLER (1/82-12/87) |
| (A-16) - SECONDARY WING EXTENSION AXLE AND DEPTH CONTROL, FOR USE WITH DOUBLE FOLD MODELS | (4700) - INTERNATIONAL HARVESTER VIBRA TILLER (1/82-12/87) |
| (A-27) - WHEEL AND HUB-WING, EXTENSIONS, AND GAUGE | (4700) - INTERNATIONAL HARVESTER VIBRA TILLER (1/82-12/87) |
| (A-32[A]) - GAUGE WHEEL MOUNTING AND SUPPORTS | (4700) - INTERNATIONAL HARVESTER VIBRA TILLER (1/82-12/87) |
| (C-06) - ROW CROP UNIT (2-ROW) - GATHERING BELTS AND KNIFE | (720) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/88) |
| (D-05) - ROW CROP UNIT (3-ROW) - GATHERING BELTS AND KNIFE | (720) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/88) |
| (B-05) - TONGUE, JACK AND EXTENSION | (10) - INTERNATIONAL HARVESTER FLAIL CHOPPER (1/77-12/91) |
| (C-06) - ROW CROP UNIT (2-ROW) - GATHERING BELTS AND KNIFE | (830) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/80) |
| (D-05) - ROW CROP UNIT (3-ROW) - GATHERING BELTS AND KNIFE | (830) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/80) |
| (07) - WHEEL AXLE - TRANSPORT | (1290) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/72-12/76) |
| (08) - WHEEL AXLE - LEFT | (1290) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/72-12/76) |
| (09) - WHEEL AXLE - RIGHT | (1290) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/72-12/76) |
| (28) - KNIFE DRIVE FLYWHEEL CRANK | (1290) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/72-12/76) |
| (29) - KNIFE DRIVE ARM | (1290) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/72-12/76) |
| (30) - KNIFE DRIVE HEAD | (1290) - INTERNATIONAL HARVESTER MOWER CONDITIONER (1/72-12/76) |
| (K-03) - PIVOT FRAME, BREAKAWAY ARM, LATCH SUPPORT AND SUPPORT STAND | (1000) - INTERNATIONAL HARVESTER BALANCED MOWER (1/68-12/82) |
| (E-02) - SIDE MTG PLATE & STAND | (115) - INTERNATIONAL HARVESTER MOWER (1/64-12/68) |
| (F-02) - MAIN FRAME AND RELATED PARTS | (200) - INTERNATIONAL HARVESTER MOWER (1/65-12/88) |
| (D-08) - DRIVE, GROUND DRIVEN RAKES | (35) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/69-12/88) |
| (D-17) - LINKAGE | (35) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/69-12/88) |
| (C-06) - TONGUE, HITCH PLATE, YOKE, BRACE AND RELATED PARTS, FOR FIVE AND SEVEN WHEEL RAKES | (30) - INTERNATIONAL HARVESTER WHEEL RAKE (1/68-12/88) |
| (26) - WHEELS, CASTERS AND WHEEL LOCKS | (742) - CASE IH DUPLEX PULL-TYPE WINDROWER (8/97-12/97) |
| (32) - FRONT WHEEL SUPPORT, REAR UNIT | (742) - CASE IH DUPLEX PULL-TYPE WINDROWER (8/97-12/97) |
| (26) - WHEELS, CASTERS AND WHEEL LOCKS | (750) - CASE IH DUPLEX PULL-TYPE WINDROWER (1/86-12/88) |
| (32) - FRONT WHEEL SUPPORT, REAR UNIT | (750) - CASE IH DUPLEX PULL-TYPE WINDROWER (1/86-12/88) |
| (A-28) - SINGLE OVERSHOT AUGER HEADER, CONDITIONER UPPER ROLL, HEADER | (SINGLE) - OVERSHOT AUGER HEADER FOR WINDROWERS (1/67-12/90) |
| (A-32) - SINGLE OVERSHOT AUGER HEADER, HEADER FLOTATION AND ARM, 4000 | (SINGLE) - OVERSHOT AUGER HEADER FOR WINDROWERS (1/67-12/90) |
| (C-21) - DUAL AUGER, REEL DRIVE, MANUAL VARIABLE SPEED | (DUAL) - AUGER HEADER FOR WINDROWERS (1/76-12/90) |
| (C-40) - DUAL AUGER, HEADER FLOTATION AND ARM | (DUAL) - AUGER HEADER FOR WINDROWERS (1/76-12/90) |
| (H-12) - FRONT DRIVE SHAFT | (130) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (J-14) - FRONT DRIVE SHAFT | (155) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (B-24) - BELT TIGHTENER | (2400) - INTERNATIONAL HARVESTER ROUND BALER (1/79-12/86) |
| (A-28) - BELT TIGHTENER | (241) - INTERNATIONAL HARVESTER BIGROLL ROUND BALER (1/74-12/79) |
| (9-16) - GAUGE WHEEL | (5420) - CASE IH RECTANGULAR BALER (1/85-12/87) |
| (9-004) - MAIN FRAME, CONT'D | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-026) - HITCH, THREE DRILL HEAVY DUTY, 16 X 6, 20 X 6, 24 X 6, 28 X 6, 20 X 7, 24 X 7, 16 X 8, CONT'D | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-032) - CENTER HITCH AND STABILIZER, THREE DRILL, HITCH SERIAL NUMBER 501 AND AFTER | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-036) - HEAVY DUTY HITCH FOUR DRILL, 24 X 6, 20 X 7, 28 X 6, 24 X 7 | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-044) - HITCH HEAVY DUTY FOUR DRILL, 20 X 6, 16 X 8, 16 X 6 | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-056) - CENTER HITCH AND STABILIZER FOUR DRILL, 16 X 6 AND 20 X 6, HITCH SERIAL NUMBER 501 AND AFTER | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-058) - CENTER HITCH AND STABILIZER FOUR DRILL, 24 X 6, 28 X 6, 20 X 7, 24 X 7, SERIAL NUMBER 501 AND AFTER | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-072) - FRAME AND HITCH ENDWISE TRANSPORT, LEADING DRILL | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-074) - FRAME AND HITCH ENDWISE TRANSPORT, LEADING DRILL, CONT'D | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-078) - FRAME ENDWISE TRANSPORT, SECOND OR THIRD DRILL | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-080) - FRAME ENDWISE TRANSPORT, TRAILING DRILL WITH CASTER WHEEL | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-140) - DISC MARKER, HYDRAULICALLY CONTROLLED | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-142) - DISC MARKER, HYDRAULIC CONTROLLED | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-150) - CASTER WHEEL AXLE, 14 X 6, 16 X 6 | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-154) - COUNTER | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-162) - REAR SUSPENSION PRESS WHEEL GANG, 14 X 6 AND 16 X 6 | (6200) - CASE IH PRESS WHEEL GRAIN DRILL (1/80-12/90) |
| (9-038) - CENTER HITCH AND STABILIZER FOUR DRILL, 16 X 6 AND 20 X 6 | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-008) - SPINDLES, HUBS AND BEARINGS, USED WITH TOOL BAR WING FRAME WHEELS | (8600) - CASE IH AIR DRILL (8/87-12/96) |
| (9-062) - TOOLBAR WING FRAMES | (8600) - CASE IH AIR DRILL (8/87-12/96) |
| (9-080) - 13 INCH DEPTH PRESS WHEEL | (8600) - CASE IH AIR DRILL (8/87-12/96) |
| (9-082) - OPTIONAL 18 INCH DEPTH PRESS WHEEL, WITH ONE PIECE SOLID PRESS WHEEL, PRIOR TO P.I.N. 141275 | (8600) - CASE IH AIR DRILL (8/87-12/96) |
| (9-083A) - OPTIONAL 18 INCH DEPTH PRESS WHEEL, WITH TWO PIECE SPLIT PRESS WHEEL, P.I.N. 141275 AND AFTER | (8600) - CASE IH AIR DRILL (8/87-12/96) |
| (9-082) - GRAIN SEEDING TUBE HOLDER, PRIOR TO 1980 SEASON | (310) - CASE IH DISKALL (1/85-12/90) |
| (9-12) - HITCH | (350) - CASE IH DISK HARROW (1/74-12/91) |
| (9-06) - HITCH | (596) - CASE IH DISK HARROW (1/80-12/00) |
| (9-04) - HITCH | (780) - CASE IH DISK HARROW (1/86-12/04) |
| (9-16) - DISK GANG SUPPORT | (6500) - CASE IH CONSER-TILL PLOW (1/87-12/97) |
| (A-110) - NARROW-ROW ROW-CROP UNIT - UPPER GATHERING CHAIN AND PAN, LEFT AND RIGHT | (50) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/62-12/65) |
| (A-111) - NARROW-ROW ROW-CROP UNIT - CENTER GATHERING CHAIN AND PAN, LEFT AND RIGHT | (50) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/62-12/65) |
| (A-112) - NARROW-ROW ROW-CROP UNIT - LOWER GATHERING CHAIN | (50) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/62-12/65) |
| (A-114) - NARROW-ROW ROW-CROP UNIT - DIVIDER GATHERING CHAIN AND PAN | (50) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/62-12/65) |
| (B-86) - NARROW-ROW ROW-CROP UNIT (TWO-ROW) - UPPER GATHERING CHAIN AND PAN, LEFT AND RIGHT | (55) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/65-12/66) |
| (B-87) - NARROW-ROW ROW-CROP UNIT (TWO-ROW) - CENTER GATHERING CHAIN AND PAN, LEFT AND RIGHT | (55) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/65-12/66) |
| (B-88) - NARROW-ROW ROW-CROP UNIT (TWO-ROW) - LOWER GATHERING CHAIN | (55) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/65-12/66) |
| (B-90) - NARROW-ROW ROW-CROP UNIT (TWO-ROW) - DIVIDER GATHERING CHAIN AND PAN | (55) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/65-12/66) |
| (C-070) - ROW CROP UNIT (ONE-ROW) - UPPER GATHERER CHAIN DRIVE LEFT | (550) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/66-12/72) |
| (C-081) - WIDE-NARROW ROW CROP UNIT - MAIN FRAME | (550) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/66-12/72) |
| (C-102) - NARROW-ROW ROW-CROP UNIT (TWO-ROW) - UPPER GATHERING CHAIN AND PAN, LEFT AND RIGHT | (550) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/66-12/72) |
| (C-103) - NARROW-ROW ROW-CROP UNIT (TWO-ROW) - CENTER GATHERING CHAIN AND PAN, LEFT AND RIGHT | (550) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/66-12/72) |
| (C-104) - NARROW-ROW ROW-CROP UNIT (TWO-ROW) - LOWER GATHERING CHAIN | (550) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/66-12/72) |
| (C-106) - NARROW-ROW ROW-CROP UNIT (TWO-ROW) - DIVIDER GATHERING CHAIN AND PAN | (550) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/66-12/72) |
| (F-065) - ROW CROP UNIT - UPPER GATHERER CHAIN AND PAN RIGHT | (555) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/73-12/75) |
| (F-067) - ROW CROP UNIT - UPPER GATHERER CHAIN DRIVE LEFT | (555) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/73-12/75) |
| (F-080) - NARROW-ROW, ROW-CROP UNIT - UPPER GATHERING CHAIN AND PAN, LEFT AND RIGHT | (555) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/73-12/75) |
| (F-081) - NARROW-ROW, ROW-CROP UNIT - CENTER GATHERING CHAIN AND PAN, LEFT AND RIGHT | (555) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/73-12/75) |
| (F-082) - NARROW-ROW, ROW-CROP UNIT - LOWER GATHERING CHAIN | (555) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/73-12/75) |
| (F-083) - NARROW-ROW, ROW-CROP UNIT - DIVIDER GATHERING CHAIN AND PAN | (555) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/73-12/75) |
| (F-022) - UPPER FEED SYSTEM | (555) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/73-12/75) |
| (E-077) - ROW CROP UNIT (ONE ROW) - UPPER GATHERER CHAIN AND PAN RIGHT | (650) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/70-12/75) |
| (E-079) - ROW CROP UNIT (ONE ROW) - UPPER GATHERER CHAIN DRIVE LEFT | (650) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/70-12/75) |
| (E-091) - WIDE-NARROW ROW, ROW-CROP UNIT - MAIN FRAME | (650) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/70-12/75) |
| (E-112) - NARROW ROW, ROW-CROP UNIT - UPPER GATHERING CHAIN AND PAN, LEFT AND RIGHT | (650) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/70-12/75) |
| (E-113) - NARROW ROW, ROW-CROP UNIT - CENTER GATHERING CHAIN AND PAN, LEFT AND RIGHT | (650) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/70-12/75) |
| (E-114) - NARROW ROW, ROW-CROP UNIT - LOWER GATHERING CHAIN | (650) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/70-12/75) |
| (E-115) - NARROW ROW, ROW-CROP UNIT - DIVIDER GATHERING CHAIN AND PAN | (650) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/70-12/75) |
| (25-12) - GRAIN AND TAILINGS ELEVATORS, GRAIN ELEVATOR DRIVE | (1420) - INTERNATIONAL HARVESTER COMBINE (NORTH AMERICA) (1/81-12/82) |
| (9-144) - GRAIN ELEVATOR DRIVE (CONT'D) | (1620) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/86-12/92) |
| (Q-35) - PLATFORMS, WINDROW PICKUP, BELT TYPE, RUNNER AND GAUGE WHEELS | (315) - INTERNATIONAL HARVESTER COMBINE (1/67-12/70) |
| (R-10) - SEPARATOR, RASP BAR CYLINDER AND ADJUSTING LEVER | (315) - INTERNATIONAL HARVESTER COMBINE (1/67-12/70) |
| (R-31) - SEPARATOR, PROPULSION DRIVE | (315) - INTERNATIONAL HARVESTER COMBINE (1/67-12/70) |
| (20-02) - SEPARATOR, SEPARATOR AND RELATED PARTS | (615) - INTERNATIONAL HARVESTER COMBINE (1/71-12/75) |
| (14-02) - SUSPENSION, GUIDE WHEEL AXLE, SUPPORT AND TIE ROD, ADJUSTABLE | (615) - INTERNATIONAL HARVESTER COMBINE (1/71-12/75) |
| (14-04) - SUSPENSION, GUIDE WHEEL AXLE, SUPPORT AND TIE ROD, FIXED AXLE | (615) - INTERNATIONAL HARVESTER COMBINE (1/71-12/75) |
| (24-04) - CLEANING FAN, VARIABLE FAN DRIVE, SERIAL NO. 3290 AND BELOW | (615) - INTERNATIONAL HARVESTER COMBINE (1/71-12/75) |
| (14-02) - SUSPENSION, GUIDE WHEEL AXLE, SUPPORT AND TIE ROD, ADJUSTABLE AXLE | (715) - INTERNATIONAL HARVESTER COMBINE (PRIOR TO S/N 23001) (1/71-12/79) |
| (14-05) - SUSPENSION, GUIDE WHEEL AXLE, SUPPORT AND TIE ROD, FIXED AXLE | (715) - INTERNATIONAL HARVESTER COMBINE (PRIOR TO S/N 23001) (1/71-12/79) |
| (24-04) - CLEANING FAN, VARIABLE FAN DRIVE, SERIAL NO. 5328 AND BELOW | (715) - INTERNATIONAL HARVESTER COMBINE (PRIOR TO S/N 23001) (1/71-12/79) |
| (24-06) - CLEANING FAN, VARIABLE FAN DRIVE, SERIAL NO. 5329 AND ABOVE | (715) - INTERNATIONAL HARVESTER COMBINE (PRIOR TO S/N 23001) (1/71-12/79) |
| (14-01) - SUSPENSION, GUIDE WHEEL AXLE, SUPPORT AND TIE ROD, ADJUSTABLE AXLE | (715) - INTERNATIONAL HARVESTER COMBINE (S/N 23001 & AFTER) (1/71-12/79) |
| (14-03) - SUSPENSION, GUIDE WHEEL AXLE, SUPPORT AND TIE ROD, FIXED AXLE | (715) - INTERNATIONAL HARVESTER COMBINE (S/N 23001 & AFTER) (1/71-12/79) |
| (24-03) - CLEANING FAN, VARIABLE FAN DRIVE | (715) - INTERNATIONAL HARVESTER COMBINE (S/N 23001 & AFTER) (1/71-12/79) |
| (H-06) - CONTROLS, CONCAVE CONTROL | (815) - INTERNATIONAL HARVESTER COMBINE (1/69-12/73) |
| (S-08) - ELEVATORS, GRAIN ELEVATOR DRIVE | (815) - INTERNATIONAL HARVESTER COMBINE (1/69-12/73) |
| (R-20) - SEPARATOR, VARIABLE CYLINDER DRIVE, SERIAL NO. 1972 AND BELOW | (815) - INTERNATIONAL HARVESTER COMBINE (1/69-12/73) |
| (25-10) - ELEVATORS, GRAIN ELEVATOR DRIVE | (815) - INTERNATIONAL HARVESTER COMBINE (S/N 8001 & AFTER) (1/74-12/78) |
| (13-06) - SUPERSTRUCTURE, OPERATORS PLATFORM LADDER | (815) - INTERNATIONAL HARVESTER COMBINE (S/N 8001 & AFTER) (1/74-12/78) |
| (H-04) - CONTROLS, CONCAVE CONTROL | (915) - INTERNATIONAL HARVESTER COMBINE (S/N 8000 & BEFORE) (1/69-12/73) |
| (S-08) - ELEVATORS, GRAIN ELEVATOR DRIVE | (915) - INTERNATIONAL HARVESTER COMBINE (S/N 8000 & BEFORE) (1/69-12/73) |
| (25-10) - ELEVATORS, GRAIN ELEVATOR DRIVE | (915) - INTERNATIONAL HARVESTER COMBINE (S/N 8001 & AFTER) (1/78-12/78) |
| (13-06) - SUPERSTRUCTURE, OPERATORS PLATFORM LADDER | (915) - INTERNATIONAL HARVESTER COMBINE (S/N 8001 & AFTER) (1/78-12/78) |
| (25-06) - ELEVATORS, GRAIN ELEVATOR DRIVE | (914) - INTERNATIONAL PULL-TYPE COMBINE (BEFORE S/N 8001) (1/68-12/74) |
| (25-4) - ELEVATORS, GRAIN ELEVATOR DRIVE | (914) - INTERNATIONAL PULL-TYPE COMBINE (S/N 8001 & AFTER) (1/75-12/79) |
| (21-06) - THRESHING CYLINDER AND CONCAVE, CYLINDER BEATER DRIVE | (914) - INTERNATIONAL PULL-TYPE COMBINE (S/N 8001 & AFTER) (1/75-12/79) |
| (8-74) - BASKET DOOR CYLINDER SYSTEM | (1822) - CASE IH COTTON PICKER (S/N JJC0012691 & AFTER) (7/89-12/93) |
| (8-76) - BASKET DOOR CYLINDER SYSTEM | (1822) - CASE IH COTTON PICKER W/NAVISTAR ENGINE (1/88-12/93) |
| (8-74) - BASKET DOOR CYLINDER SYSTEM | (1844) - CASE IH COTTON PICKER (S/N JJC0002462 & AFTER) (7/89-12/93) |
| (8-76) - BASKET DOOR CYLINDER SYSTEM | (1844) - CASE IH COTTON PICKER W/NAVISTAR ENGINE (1/88-12/93) |
| (Q-03) - BASKET AND AIR SYSTEM, FAN HOUSING AND DISTRIBUTOR PIPE | (616) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (B-04) - POWER TRAIN, PROPULSION VARIABLE SPEED DRIVE, BELT DRIVE | (616) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (Q-03) - BASKET AND AIR SYSTEM, FAN HOUSING AND DISTRIBUTOR PIPE | (622) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (B-04) - POWER TRAIN, PROPULSION VARIABLE SPEED DRIVE, BELT DRIVE | (622) - INTERNATIONAL HARVESTER COTTON PICKER (1/80-12/88) |
| (A-11) - MAIN DRIVE | (227) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (A-20) - GATHERER DRIVE | (227) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (A-34) - WEED KNIFE ATTACHMENT | (227) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (A-11) - MAIN DRIVE | (228) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (A-20) - GATHERER DRIVE | (228) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (A-34) - WEED KNIFE ATTACHMENT | (228) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (A-11) - MAIN DRIVE | (229) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (A-20) - GATHERER DRIVE | (229) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (A-34) - WEED KNIFE ATTACHMENT | (229) - INTERNATIONAL HARVESTER CORN HEAD (1/63-12/70) |
| (A-11) - BASIC CORN HARVESTER, SNAPPING UNIT DRIVE GEARCASE | (234) - INTERNATIONAL HARVESTER CORN HARVESTER (1/64-12/65) |
| (A-34) - BASIC CORN HARVESTER, TRASH ROLLS, KNIFE TYPE, SERIAL NO. 5783 AND ABOVE | (234) - INTERNATIONAL HARVESTER CORN HARVESTER (1/64-12/65) |
| (G-14) - GRINDER AND SHELLER UNITS, CRACKING ROLLS AND CONVEYOR | (234) - INTERNATIONAL HARVESTER CORN HARVESTER (1/64-12/65) |
| (J-16) - GATHERER DRIVE | (620N) - INTERNATIONAL HARVESTER CORN HEAD (1/67-12/68) |
| (J-23) - WEED KNIFE ATTACHMENT | (620N) - INTERNATIONAL HARVESTER CORN HEAD (1/67-12/68) |
| (K-09) - WEED KNIFE, OPTIONAL | (724) - INTERNATIONAL HARVESTER CORN HEAD (S/N 513 & AFTER) (1/71-12/73) |
| (K-10) - MAIN DRIVE | (724) - INTERNATIONAL HARVESTER CORN HEAD (S/N 513 & AFTER) (1/71-12/73) |
| (L-40) - WEED KNIFE ATTACHMENT | (733) - INTERNATIONAL HARVESTER CORN HEAD (1/69-12/73) |
| (M-26) - WEED KNIFE, OPTIONAL | (743) - INTERNATIONAL HARVESTER CORN HEAD (1/69-12/73) |
| (Q-29) - WEED KNIFE ATTACHMENT | (762) - INTERNATIONAL HARVESTER CORN HEAD (1/69-12/73) |
| (N-35) - WEED KNIFE ATTACHMENT | (763) - INTERNATIONAL HARVESTER CORN HEAD (1/69-12/73) |
| (N-35) - WEED KNIFE ATTACHMENT | (764) - INTERNATIONAL HARVESTER CORN HEAD (1/71-12/73) |
| (P-29) - WEED KNIFE ATTACHMENT | (782) - INTERNATIONAL HARVESTER CORN HEAD (1/69-12/73) |
| (9-46) - GAUGE WHEELS, 21, 25 AND 30 FOOT HEADERS | (6000) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/88) |
| (9-48) - GAUGE WHEELS, 36 FOOT HEADER | (6000) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/88) |
| (9-46) - GAUGE WHEELS, 21, 25 AND 30 FOOT HEADERS | (6500) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/90) |
| (9-48) - GAUGE WHEELS, 36 FOOT HEADER | (6500) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/90) |
| (A-3) - CHASSIS, RADIATOR AND SHEET METAL, CASTER WHEEL HUB AND AXLE | (225) - INTERNATIONAL HARVESTER HAY SWATHER (1/69-12/75) |
| (A-4) - CHASSIS, RADIATOR AND SHEET METAL, CHASSIS PLATFORM LIFT AND FLOAT | (225) - INTERNATIONAL HARVESTER HAY SWATHER (1/69-12/75) |
| (Q-19) - PLATFORM, KNIFE DRIVE ARM | (225) - INTERNATIONAL HARVESTER HAY SWATHER (1/69-12/75) |
| (Q-20) - PLATFORM, KNIFE DRIVE HEAD | (225) - INTERNATIONAL HARVESTER HAY SWATHER (1/69-12/75) |
| (Q-21) - PLATFORM, KNIFE DRIVE FLYWHEEL CRANK | (225) - INTERNATIONAL HARVESTER HAY SWATHER (1/69-12/75) |
| (F-2) - HYDRAULICS SYSTEM | (225) - INTERNATIONAL HARVESTER HAY SWATHER (1/69-12/75) |
| (A-078) - PLATFORM, LIFT ARMS AND SOLE, AUGER PLATFORM, NOT CANVAS OR PEA BAR PLATFORM | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (E-035) - PLATFORM, PLATFORM DRIVE ROLLER | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (A-04) - CHASSIS, RADIATOR AND SHEET METAL, CASTER WHEEL HUB AND AXLE | (210) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/69-12/74) |
| (Q-12) - PLATFORM, PLATFORM DRIVE ROLLER, PRIOR TO SERIAL NUMBER 3700 | (210) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/69-12/74) |
| (17-03) - MOUNTED EQUIPMENT, CONDITIONER LIFT MECHANISM | (230) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/71-12/76) |
| (14-2) - SUSPENSION, PLATFORM LIFT CYLINDER AND STABILIZERS | (230) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/71-12/76) |
| (09-3) - FRAME, CASTER WHEEL HUB AND AXLE (SINGLE) | (230) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/71-12/76) |
| (P-14) - HAY CONDITIONER, ROLL DRIVE | (275) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (Q-52) - PLATFORMS, KNIFE DRIVE ARM | (275) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (Q-56) - PLATFORMS, KNIFE DRIVE HEAD | (275) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (Q-57) - PLATFORMS, KNIFE DRIVE FLYWHEEL CRANK | (275) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (P-14) - HAY CONDITIONER, ROLL DRIVE | (375) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (Q-52) - PLATFORMS, KNIFE DRIVE ARM | (375) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (Q-56) - PLATFORMS, KNIFE DRIVE HEAD | (375) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (Q-57) - PLATFORMS, KNIFE DRIVE FLYWHEEL CRANK | (375) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/67-12/88) |
| (6-14) - BEVEL GEAR CASE AND PROPELLER SHAFT | (4000) - CASE IH SELF-PROPELLED WINDROWER (S/N 4501 & AFTER) (1/80-12/86) |
| (9-10) - HEADER DRIVE | (4000) - CASE IH SELF-PROPELLED WINDROWER (S/N 4501 & AFTER) (1/80-12/86) |
| (9-14) - HEADER DRIVE | (4000) - CASE IH SELF-PROPELLED WINDROWER (S/N 4501 & AFTER) (1/80-12/86) |
| (17-03) - MOUNTED EQUIPMENT, CONDITIONER LOWER DRIVE, CHASSIS MOUNTED | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (14-01) - SUSPENSION, CASTER WHEEL AXLES | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (14-03) - SUSPENSION, DUAL WHEEL AXLES | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-01) - DRIVE TRAIN, TANDEM PUMP WITH HYDROSTATIC MOTORS AND CONNECTIONS | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-03) - DRIVE TRAIN, TANDEM PUMP WITH HYDROSTATIC MOTORS AND CONNECTIONS | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-05) - DRIVE TRAIN, HEADER DRIVE RIGHT HAND | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-13) - DRIVE TRAIN, BEVEL GEAR CASE AND PROPELLER SHAFT | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (05-01) - STEERING, STEERING CONTROLS | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (05-03) - STEERING, STEERING CONTROLS | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (05-05) - STEERING, STEERING CONTROLS | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (05-07) - STEERING, STEERING CONTROLS | (4000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (6-14) - BEVEL GEAR CASE AND PROPELLER SHAFT | (5000) - CASE IH SELF-PROPELLED WINDROWER (S/N 1901 & AFTER) (1/80-12/86) |
| (9-10) - HEADER DRIVE | (5000) - CASE IH SELF-PROPELLED WINDROWER (S/N 1901 & AFTER) (1/80-12/86) |
| (9-14) - HEADER DRIVE | (5000) - CASE IH SELF-PROPELLED WINDROWER (S/N 1901 & AFTER) (1/80-12/86) |
| (17-03) - MOUNTED EQUIPMENT, CONDITIONER LOWER DRIVE, CHASSIS MOUNTED | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (14-01) - SUSPENSION, CASTER WHEEL AXLES | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (14-03) - SUSPENSION, DUAL WHEEL AXLES | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-01) - DRIVE TRAIN, TANDEM PUMP WITH HYDROSTATIC MOTORS AND CONNECTIONS | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-03) - DRIVE TRAIN, TANDEM PUMP WITH HYDROSTATIC MOTORS AND CONNECTIONS | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-05) - DRIVE TRAIN, HEADER DRIVE RIGHT HAND | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-13) - DRIVE TRAIN, BEVEL GEAR CASE AND PROPELLER SHAFT | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (05-01) - STEERING, STEERING CONTROLS | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (05-03) - STEERING, STEERING CONTROLS | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (05-05) - STEERING, STEERING CONTROLS | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (05-07) - STEERING, STEERING CONTROLS | (5000) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (17-03) - MOUNTED EQUIPMENT, CONDITIONER LOWER DRIVE, CHASSIS MOUNTED | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (14-01) - SUSPENSION, CASTER WHEEL AXLES | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (14-03) - SUSPENSION, DUAL WHEEL AXLES | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-01) - DRIVE TRAIN, TANDEM PUMP WITH HYDROSTATIC MOTORS AND CONNECTIONS | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-03) - DRIVE TRAIN, TANDEM PUMP WITH HYDROSTATIC MOTORS AND CONNECTIONS | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-05) - DRIVE TRAIN, HEADER DRIVE RIGHT HAND | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (07-13) - DRIVE TRAIN, BEVEL GEAR CASE AND PROPELLER SHAFT | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (05-01) - STEERING, STEERING CONTROLS | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (05-03) - STEERING, STEERING CONTROLS | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (05-05) - STEERING, STEERING CONTROLS | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (05-07) - STEERING, STEERING CONTROLS | (5500) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/76-12/86) |
| (5-2) - STEERING AND GROUND SPEED | (6000) - CASE IH SELF-PROPELLED WINDROWER (1/83-12/88) |
| (9-12) - WALKING BEAM AND CASTERS | (6000) - CASE IH SELF-PROPELLED WINDROWER (1/83-12/88) |
| (5-2) - STEERING AND GROUND SPEED | (6500) - CASE IH SELF-PROPELLED WINDROWER (1/83-12/88) |
| (9-12) - WALKING BEAM AND CASTERS | (6500) - CASE IH SELF-PROPELLED WINDROWER (1/83-12/88) |
| (B-10) - DRAPER HEADER, CONVEYOR DRIVE | (DRAPER) - HEADER FOR WINDROWERS (1/76-12/90) |
| (B-36) - DRAPER HEADER, FLOAT TRANSFER AND LOCKOUT ATTACHMENT, SERIAL | (DRAPER) - HEADER FOR WINDROWERS (1/76-12/90) |
| (B-41) - DRAPER HEADER, CONDITIONER UPPER ROLL, HEADER MOUNTED, PRIOR | (DRAPER) - HEADER FOR WINDROWERS (1/76-12/90) |
| (B-49) - DRAPER HEADER, HEADER FLOTATION AND ARM, BUILT 1976 TO 1979 | (DRAPER) - HEADER FOR WINDROWERS (1/76-12/90) |
| (B-51) - DRAPER HEADER, HEADER FLOATATION AND ARM, 1979 AND SINCE | (DRAPER) - HEADER FOR WINDROWERS (1/76-12/90) |
| (12-035) - GOVERNOR CONTROLS, BOSCH, 685/UP TO 10580, 268/UP TO 800, H84/UP TO 3007 | (HYDRO 84) - INTERNATIONAL HYDROSTATIC DRIVE TRACTOR (EU) (1/78-12/81) |
| (12-12) - POWER, GOVERNOR CONTROLS, BOSCH | (HYDRO 84) - INTERNATIONAL HYDROSTATIC DRIVE TRACTOR (NA) (1/78-12/81) |
| (12-20) - GOVERNOR CONTROLS, BOSCH | (2400) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/73) |
| (12-11) - POWER, GOVERNOR CONTROLS, GASOLINE ENGINE TRACTORS | (2400) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/71-12/73) |
| (12-12) - POWER, GOVERNOR CONTROLS, DIESEL ENGINE TRACTORS | (2400) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/71-12/73) |
| (12-018) - GOVERNOR CONTROLS, BOSCH | (2500) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/77) |
| (12-12) - POWER, GOVERNOR CONTROLS, GASOLINE ENGINE TRACTORS | (2500) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/71-12/77) |
| (12-13) - POWER, GOVERNOR CONTROLS, DIESEL ENGINE TRACTORS | (2500) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/71-12/77) |
| (12-20) - GOVERNOR CONTROLS, BOSCH | (454) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/71-12/73) |
| (12-11) - POWER, GOVERNOR CONTROLS, GASOLINE ENGINE TRACTORS | (454) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/71-12/73) |
| (12-12) - POWER, GOVERNOR CONTROLS, DIESEL ENGINE TRACTORS | (454) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/71-12/73) |
| (12-018) - GOVERNOR CONTROLS, BOSCH | (574) - INTERNATIONAL SERIES-A TRACTOR (EUROPE) (1/70-12/77) |
| (12-12) - POWER, GOVERNOR CONTROLS, GASOLINE ENGINE TRACTORS | (574) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/70-12/77) |
| (12-13) - POWER, GOVERNOR CONTROLS, DIESEL ENGINE TRACTORS | (574) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/70-12/77) |
| (12-032) - GOVERNOR CONTROLS, BOSCH | (258) - INTERNATIONAL INDUSTRIAL TRACTOR (1/78-12/86) |
| (12-035) - GOVERNOR CONTROLS, BOSCH, 685/UP TO 10580, 268/UP TO 800, H84/UP TO 3007 | (268) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/78-12/86) |
| (12-032) - GOVERNOR CONTROLS, BOSCH | (278) - INTERNATIONAL TRACTOR (1/78-12/81) |
| (12-10) - POWER, GOVERNOR CONTROLS, DIESEL ENGINE TRACTORS | (464) - INTERNATIONAL TRACTOR (1/73-12/73) |
| (12-11) - POWER, GOVERNOR CONTROLS, CARBURETED ENGINE TRACTORS | (464) - INTERNATIONAL TRACTOR (1/73-12/73) |
| (12-07) - GOVERNOR CONTROLS, BOSCH INJECTION | (474) - INTERNATIONAL DIESEL TRACTOR (1/73-12/74) |
| (12-11) - POWER, GOVERNOR CONTROLS, BOSCH | (484) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81) |
| (12-032) - GOVERNOR CONTROLS, BOSCH | (584) - INTERNATIONAL DIESEL TRACTOR (EUROPE) (1/78-12/81) |
| (12-12) - GOVERNOR CONTROLS, BOSCH | (584) - INTERNATIONAL TRACTOR (NORTH AMERICA) (1/78-12/84) |
| (12-032) - GOVERNOR CONTROLS, BOSCH | (585) - INTERNATIONAL TRACTOR (1/81-12/85) |
| (12-10) - GOVERNOR CONTROLS, C.A.V. INJECTION | (674) - INTERNATIONAL DIESEL TRACTOR (EUROPE) (1/73-12/77) |
| (12-12) - GOVERNOR CONTROLS, BOSCH | (674) - INTERNATIONAL DIESEL TRACTOR (EUROPE) (1/73-12/77) |
| (12-11) - POWER, GOVERNOR CONTROLS, CARBURETED ENGINE TRACTORS | (674) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/73-12/77) |
| (12-12) - POWER, GOVERNOR CONTROLS, BOSCH | (684) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-1/84) |
| (12-035) - GOVERNOR CONTROLS, BOSCH, 685/UP TO 10580, 268/UP TO 800, H84/UP TO 3007 | (685) - INTERNATIONAL DIESEL TRACTOR (1/81-12/85) |
| (12-032) - GOVERNOR CONTROLS, BOSCH | (784) - INTERNATIONAL DIESEL TRACTOR (EUROPE) (1/78-12/81) |
| (12-12) - POWER, GOVERNOR CONTROLS, BOSCH | (784) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/78-12/81) |
| (12-032) - GOVERNOR CONTROLS, BOSCH | (785) - INTERNATIONAL DIESEL TRACTOR (1/81-12/86) |
| (12-12) - GOVERNOR CONTROLS, BOSCH | (884) - INTERNATIONAL TRACTOR (NORTH AMERICA) (1/79-12/84) |
| (12-026) - GOVERNOR CONTROLS -BOSCH- | (884) - INTERNATIONAL TRACTOR (UP TO S/N 3083) (EUROPE) (1/79-12/81) |
| (12-026) - GOVERNOR CONTROLS -BOSCH- | (885) - INTERNATIONAL DIESEL TRACTOR (UP TO S/N 3083) (1/81-12/85) |
