| Узел | Модель |
|---|
| (B02) - MAIN FRAME WITH ROCKSHAFT AND WHEEL GANGS, 2010, FOUR RANK, DISCONTINUED | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B04) - MAIN FRAME WITH ROCKSHAFT AND WHEEL GANGS, 3010 AND 4010 THREE RANK | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B06) - MAIN FRAME WITH ROCKSHAFT AND WHEEL GANGS, 2310 THRU 4010 FOUR RANK | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B08) - MAIN FRAME WITH ROCKSHAFT AND WHEEL GANGS, 4710 AND 5010 FOUR RANK | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B10) - WING FRAME WITH ROCKSHAFT AND WHEEL GANGS, 2310 THRU 3310 FOUR RANK AND 3010 THREE RANK | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B12) - WING FRAME WITH ROCKSHAFT AND WHEEL GANGS, 3710 THREE RANK, 4010 THREE AND FOUR RANK | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B14) - WING FRAME WITH ROCKSHAFT AND WHEEL GANGS, FIVE SECTION INNER | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B16) - WING FRAMES WITH ROCKSHAFT AND WHEEL GANGS, FIVE SECTION OUTER | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B22) - SINGLE CASTER, DISCONTINUED | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B24) - CASTER, STANDARD, ALL WINGS AND MAIN FRAME 40 FOOT AND UNDER | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B26) - CASTER, HEAVY DUTY, MAIN FRAME OVER 40 FOOT | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B30) - DRAWPOLE, TWO SECTION, DISCONTINUED | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B31) - REAR HITCH, TWO SECTION, DISCONTINUED | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B32) - DRAWPOLE, FRONT TOW AIR SYSTEM | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B34) - DRAWPOLE, REAR TOW AIR SYSTEM | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B36) - REAR HITCH | (CONCORD) - 10" AIR TILL DRILL (1/96-11/01) |
| (B02) - MAIN FRAME WITH ROCKSHAFT & WHEEL GANGS, 2012, 3 & 4 RANK, DISCONTINUED | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B04) - MAIN FRAME WITH ROCKSHAFT & WHEEL GANGS, 2412 - 4412 3 RANK | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B06) - MAIN FRAME WITH ROCKSHAFT & WHEEL GANG, 2412 - 4412, 4 RANK | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B08) - MAIN FRAME WITH ROCKSHAFT & WHEEL GANGS, 4812, 3 & 4 RANK | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B10) - MAIN FRAME WITH ROCKSHAFT & WHEEL GANGS, 5612 & 6012, 3 & 4 RANK | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B12) - WING FRAME WITH ROCKSHAFT & WHEEL GANGS, 2412 - 3212, 3 & 4 RANK, RIGHT-HAND WING SHOWN | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B14) - WING FRAMES WITH ROCKSHAFTS & WHEEL GANGS, 3612 - 4412, 3 & 4 RANK, RIGHT HAND WING SHOWN | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B16) - WING FRAMES WITH ROCKSHAFT & WHEEL GANGS, 5 SECTION OUTER RIGHT HAND WING SHOWN | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B18) - WING FRAME WITH ROCKSHAFT & WHEEL GANGS, 5 SECTION INNER RIGHT HAND WING SHOWN | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B24) - SINGLE CASTER, DISCONTINUED | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B26) - CASTER, STANDARD, ALL WINGS & MAIN FRAME 44' AND UNDER | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B28) - CASTER, HEAVY DUTY, MAIN FRAME OVER 44' | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B32) - DRAWPOLE, 2 SECTION, DISCONTINUED | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B33) - REAR HITCH, 2 SECTION, DISCONTINUED | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B34) - DRAWPOLE, FRONT TOW AIR SYSTEM | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B36) - DRAWPOLE, REAR TOW AIR SYSTEM | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (B38) - REAR HITCH, 12" ATD'S | (CONCORD) - 12" AIR TILL DRILL (1/96-11/01) |
| (09-008) - FRAME - FOLDING, 8 ROW NARROW (Jun 14 2010 7:53:00.2558 AM) | (1820) - CASE IH CULTIVATOR (1/97-8/01) |
| (09-010) - FRAME - FOLDING, 8 ROW WIDE, 12 ROW NARROW, 12 ROW WIDE AND 16 ROW NARROW (Jun 14 2010 7:53:00.2559 AM) | (1820) - CASE IH CULTIVATOR (1/97-8/01) |
| (9-10) - FRAME - FOLDING, 12 ROW WIDE AND 16 ROW NARROW | (183) - CASE IH CULTIVATOR (1/81-12/92) |
| (9-04) - MAIN FRAME, FOLDING | (184) - CASE IH CULTIVATOR (1/86-12/93) |
| (9-04) - MAIN FRAME, FOLDING | (1840) - CASE IH CULTIVATOR (1/94-12/97) |
| (9-02) - FRAME | (2220) - CASE IH CULTIVATOR (10/99-12/05) |
| (09-03) - FRAME STACKER | (2240) - CASE IH CULTIVATOR (10/99-12/05) |
| (09-18) - FOLDING MARKERS STACKER | (2240) - CASE IH CULTIVATOR (10/99-12/05) |
| (09-05) - 6 FOOT WING - 26 FOOT 3 INCH MACHINE LAYOUT | (4400) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-06) - 9 FOOT WING - 29 FOOT 3 INCH MACHINE LAYOUT | (4400) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-07) - 12 FOOT WING - 35 FOOT 3 INCH MACHINE LAYOUT | (4400) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-13) - HINGE ASSEMBLY - FLAT-FOLD - RIGID - 18 FOOT MACHINE | (4400) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-14) - HINGE ASSEMBLY - FLAT-FOLD FLOATING - 22 FOOT 11 INCH MACHINE | (4400) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-05) - 6 FOOT WING - 26 FOOT 3 INCH MACHINE LAYOUT | (4450) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-06) - 9 FOOT WING - 29 FOOT 3 INCH MACHINE LAYOUT | (4450) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-07) - 12 FOOT WING - 35 FOOT 3 INCH MACHINE LAYOUT | (4450) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-13) - HINGE ASSEMBLY - FLAT-FOLD - RIGID - 18 FOOT MACHINE | (4450) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (09-14) - HINGE ASSEMBLY - FLAT-FOLD FLOATING - 22 FOOT 11 INCH MACHINE | (4450) - CASE IH COMBO-MULCH FINISHER (1/00-12/00) |
| (9-08) - REAR FURROW WHEEL | (735) - CASE IH MOLDBOARD PLOW (1/90-12/91) |
| (3-06) - PICKUP ROTOR ASSEMBLY | (8430) - CASE IH ROUND BALER (1/88-12/00) |
| (2-18) - DRIVE ASSEMBLY, SERIAL NUMBER CFH0124001 THROUGH CFH0124137 | (8435) - CASE IH SILAGE SPECIAL ROUND BALER (1/97-12/00) |
| (2-20) - DRIVE ASSEMBLY, SERIAL NUMBER CFH0124401 AND LATER | (8435) - CASE IH SILAGE SPECIAL ROUND BALER (1/97-12/00) |
| (3-06) - PICKUP ROTOR ASSEMBLY, SERIAL NUMBER CFH0124001 THROUGH CFH0124137 | (8435) - CASE IH SILAGE SPECIAL ROUND BALER (1/97-12/00) |
| (3-06) - PICKUP ROTOR ASSEMBLY | (8455) - CASE IH ROUND BALER (STANDARD) (1/92-12/99) |
| (3-06) - PICKUP ROTOR ASSEMBLY | (8455T) - CASE IH ROUND BALER W/TRACTOR HYDRAULICS (1/92-12/97) |
| (3-04) - PICKUP ASSEMBLY, WITH HEX SHAFT ONLY, SERIAL NUMBER CFH0016501 THROUGH CFH0057722 | (8460) - CASE IH ROUND BALER (S/N CFH0057418 & AFTER) (1/88-12/93) |
| (3-06) - PICKUP ROTOR ASSEMBLY, KEYED SHAFT, SERIAL NUMBER CFH0057723 AND LATER | (8460) - CASE IH ROUND BALER (S/N CFH0057418 & AFTER) (1/88-12/93) |
| (3-10) - PICKUP ROTOR ASSEMBLY, SERIAL NUMBER CFH0077006 AND LATER | (8465) - CASE IH AUTO ROUND BALER (1/91-12/97) |
| (3-10) - PICKUP ROTOR ASSEMBLY, SERIAL NUMBER CFH0074012 AND LATER | (8465T) - CASE IH ROUND BALER W/TRACTOR HYDRAULICS (1/91-12/97) |
| (3-10) - PICKUP ROTOR ASSEMBLY | (8480) - CASE IH FIXED CHAMBER ROUND BALER (1/90-12/00) |
| (8-02) - HYDRAULIC ASSEMBLY, LEFT | (8480) - CASE IH FIXED CHAMBER ROUND BALER (1/90-12/00) |
| (8-04) - HYDRAULIC ASSEMBLY, RIGHT | (8480) - CASE IH FIXED CHAMBER ROUND BALER (1/90-12/00) |
| (3-06) - PICKUP ROTOR ASSEMBLY | (8545) - CASE IH RECTANGULAR BALER (1/89-12/99) |
| (03-04) - PICKUP ROTOR ASSEMBLY | (8555) - CASE IH RECTANGULAR BALER (1/90-12/99) |
| (3-14) - PICKUP ROTOR ASSEMBLY | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (EUROPE) (1/95-12/00) |
| (5-14) - FEEDER LINKAGE AND DOOR ASSEMBLY | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (EUROPE) (1/95-12/00) |
| (09-018) - BALE ROLLER CHUTE KIT,HK40831 COMPLETE-INCLUDES PGS 9-18 THRU 9-21TO BE ORDERED THRU WHOLEGOODS ONLY | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (NORTH AMERICA) (1/95-12/00) |
| (03-016) - PICKUP ROTOR ASSEMBLY | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (NORTH AMERICA) (1/95-12/00) |
| (05-018) - FEEDER LINKAGE AND DOOR ASSEMBLY | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (NORTH AMERICA) (1/95-12/00) |
| (03-18) - BAR ASSEMBLY, TINE | (8580) - CASE IH LARGE RECTANGULAR BALER (1/88-12/98) |
| (05-10) - STUFFER DRIVE ASSEMBLY, LEFT | (8580) - CASE IH LARGE RECTANGULAR BALER (1/88-12/98) |
| (05-14) - STUFFER AND STUFFER CLUTCH DRIVE ASSEMBLY, RIGHT | (8580) - CASE IH LARGE RECTANGULAR BALER (1/88-12/98) |
| (05-20) - STUFFER CLUTCH CONTROL ASSEMBLY | (8580) - CASE IH LARGE RECTANGULAR BALER (1/88-12/98) |
| (06-02) - NEEDLE ASSEMBLY | (8580) - CASE IH LARGE RECTANGULAR BALER (1/88-12/98) |
| (5-12) - FEEDER LINKAGE AND DOOR ASSEMBLIES | (8585) - CASE IH LARGE (3 X 4) RECTANGLER BALER (1/98-12/00) |
| (03-20) - BAR ASSEMBLY, TINE, S.N. CFH0139500 AND LATER | (8590) - CASE IH LARGE (4 X 4) RECTANGULAR BALER (NORTH AMERICA) (1/98-12/00) |
| (05-06) - STUFFER DRIVE ASSEMBLY, LEFT | (8590) - CASE IH LARGE (4 X 4) RECTANGULAR BALER (NORTH AMERICA) (1/98-12/00) |
| (05-10) - STUFFER AND STUFFER CLUTCH DRIVE ASSEMBLY, RIGHT | (8590) - CASE IH LARGE (4 X 4) RECTANGULAR BALER (NORTH AMERICA) (1/98-12/00) |
| (05-16) - STUFFER CLUTCH CONTROL ASSEMBLY | (8590) - CASE IH LARGE (4 X 4) RECTANGULAR BALER (NORTH AMERICA) (1/98-12/00) |
| (3-18) - BAR ASSEMBLY, TINE | (8590) - CASE IH LARGE RECTANGULAR BALER (EUROPE) (1/97-12/98) |
| (5-06) - STUFFER DRIVE ASSEMBLY, LEFT | (8590) - CASE IH LARGE RECTANGULAR BALER (EUROPE) (1/97-12/98) |
| (5-10) - STUFFER AND STUFFER CLUTCH DRIVE ASSEMBLY, RIGHT | (8590) - CASE IH LARGE RECTANGULAR BALER (EUROPE) (1/97-12/98) |
| (5-16) - STUFFER CLUTCH CONTROL ASSEMBLY | (8590) - CASE IH LARGE RECTANGULAR BALER (EUROPE) (1/97-12/98) |
| (39.110.01) - PULL HITCH ASSEMBLY | (PULL HITCH) - ATTACHMENT - DMI (1/94-12/10) |
| (75.200.20) - ROW MARKER 8-30" | (ROW MARKERS) - FOR TOOLBAR APPLICATIONS - DMI (1/94-12/06) |
| (75.200.21) - ROW MARKER 12-30" OR 8-38" | (ROW MARKERS) - FOR TOOLBAR APPLICATIONS - DMI (1/94-12/06) |
| (39.110.01) - PULL HITCH ASSEMBLY | (PULL HITCH) - ATTACHMENT - DMI (1/94-12/10) |
| (75.200.20) - ROW MARKER 8-30" | (ROW MARKERS) - FOR TOOLBAR APPLICATIONS - DMI (1/94-12/06) |
| (75.200.21) - ROW MARKER 12-30" OR 8-38" | (ROW MARKERS) - FOR TOOLBAR APPLICATIONS - DMI (1/94-12/06) |
| (03-039) - MAST BRACE GROUP | (610) - LIQUID SYSTEM APPLICATOR - 2003 (10/03-12/11) |
| (03-040) - MAST GROUP, "BEFORE SERIAL # 6700" | (610) - LIQUID SYSTEM APPLICATOR - 2003 (10/03-12/11) |
| (03-041) - MAST GROUP, "SERIAL # 6700 AND LATER" | (610) - LIQUID SYSTEM APPLICATOR - 2003 (10/03-12/11) |
| (39.130.03) - BOOM MAST ASSEMBLY | (610) - LIQUID SYSTEM APPLICATOR - 2012 (1/12-) |
| (39.130.04) - MAST BRACE | (610) - LIQUID SYSTEM APPLICATOR - 2012 (1/12-) |
| (03-030) - MAST BRACE GROUP | (FLX610) - LIQUID SYSTEM APPLICATOR (10/03-8/09) |
| (75.200.02) - LIQUID COULTER ASSEMBLY | (NPX2800) - CASE IH APPLICATOR EQUIPMENT - 1300 GALLON (1/08-12/08) |
| (39.110.02) - NARROW REAR HITCH | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-) |
| (39.110.04) - PULL HITCH ASSEMBLY | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-) |
| (75.200.20) - 8-30 ROW MARKER OPTION | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-) |
| (75.200.21) - 12-30 OR 8-38 ROW MARKER OPTION | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-) |
| (35.100.01) - NPX5300 HYDRAULICS WITH PIN ADJUST GAUGE WHEELS | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (35.100.02) - NPX5300 HYDRAULICS WITH HYDRAULIC GAUGE WHEELS | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (35.100.03) - 5300 HYDRAULICS 2006 MODEL YEAR AND PRIOR | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (35.100.04) - 5300 HYDRAULICS 2007 MODEL YEAR AND AFTER 40-1/2 THRU 42-1/2 MODELS | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (35.100.05) - 5300 HYDRAULICS 2007 MODEL YEAR AND AFTER 47-1/2 THRU 52-1/2 MODELS ONLY | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (39.100.09) - MANUAL FOLD AROUND WINGS FOR 52-1/2 UNITS | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (39.110.02) - REAR HITCH PARTS STANDARD | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (39.110.03) - NARROW REAR HITCH | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (75.200.15) - ROW MARKER OPTION 4300 ONLY | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (75.200.10) - 8-30 ROW MARKER | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-12/09) |
| (75.200.11) - 12-30 OR 8-38 ROW MARKER | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-12/09) |
| (75.200.12) - 16-30 ROW MARKER | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-12/09) |
| (35.100.02) - 12 AND 16 ROW ONLY 2006 MODEL YEAR AND PRIOR | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/12) |
| (35.100.03) - 16 ROW ONLY 2007 MODEL YEAR AND AFTER | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/12) |
| (39.110.02) - REAR HITCH | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/12) |
| (75.200.12) - SINGLE FOLD ROW MARKER | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/12) |
| (75.200.13) - DOUBLE FOLD ROW MARKER | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/12) |
| (75.200.02) - LIQUID COULTER ASSEMBLY | (2800-16) - DMI NUTRI-PLACR (1/05-12/10) |
| (39.110.02) - NARROW REAR HITCH | (3250) - DMI NUTRI-PLACR (1/92-12/07) |
| (39.110.03) - PULL HITCH ASSEMBLY | (3250) - DMI NUTRI-PLACR (1/92-12/07) |
| (75.200.20) - 8-30 ROW MARKER OPTION | (3250) - DMI NUTRI-PLACR (1/92-12/07) |
| (75.200.21) - 12-30 OR 8-38 ROW MARKER OPTION | (3250) - DMI NUTRI-PLACR (1/92-12/07) |
| (35.100.01) - 4300 HYDRAULICS WITH PIN ADJUST GAUGE WHEELS | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (35.100.02) - 4300 HYDRAULICS WITH HYDRAULIC GAUGE WHEELS | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (35.100.03) - 5300 HYDRAULICS 2006 MODEL YEAR AND PRIOR | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (35.100.04) - 5300 HYDRAULICS 2007 MODEL YEAR AND AFTER 40-1/2 THROUGH 42-1/2 | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (35.100.05) - 5300 HYDRAULICS 2007 MODEL YEAR AND AFTER 47-1/2 THRU 52-1/2 MODELS ONLY | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (39.100.09) - MANUAL FOLD AROUND WINGS FOR 52-1/2 UNITS | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (39.110.02) - REAR HITCH PARTS STANDARD | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (39.110.03) - NARROW REAR HITCH | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (75.200.14) - ROW MARKER OPTION 4300 ONLY | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (35.100.01) - 4300 HYDRAULICS WITH PIN ADJUST GAUGE WHEELS | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (35.100.02) - 4300 HYDRAULICS WITH HYDRAULIC GAUGE WHEELS | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (35.100.03) - 5300 HYDRAULICS 2006 MODEL YEAR AND PRIOR | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (35.100.04) - 5300 HYDRAULICS 2007 MODEL YEAR AND AFTER 40-1/2 THROUGH 42-1/2 | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (35.100.05) - 5300 HYDRAULICS 2007 MODEL YEAR AND AFTER 47-1/2 THRU 52-1/2 MODELS ONLY | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (39.100.09) - MANUAL FOLD AROUND WINGS FOR 52-1/2 UNITS | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (39.110.02) - REAR HITCH PARTS STANDARD | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (39.110.03) - NARROW REAR HITCH | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (75.200.14) - ROW MARKER OPTION 4300 ONLY | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (35.100.02) - HYDRAULICS - 12 & 16 ROW (2006 AND PRIOR) | (5310) - DMI NUTRI-TILL'R (6/06-12/09) |
| (35.100.03) - HYDRAULICS - 12 & 16 ROW (2007 AND AFTER) | (5310) - DMI NUTRI-TILL'R (6/06-12/09) |
| (39.110.02) - REAR HITCH | (5310) - DMI NUTRI-TILL'R (6/06-12/09) |
| (75.200.11) - SINGLE FOLD ROW MARKER | (5310) - DMI NUTRI-TILL'R (6/06-12/09) |
| (75.200.12) - DOUBLE FOLD ROW MARKER | (5310) - DMI NUTRI-TILL'R (6/06-12/09) |
| (75.200.09) - 8-30 ROW MARKER | (5310) - DMI NUTRI-TILL'R - 6 & 8 ROW (1/00-12/09) |
| (75.200.10) - 12-30 OR 8-38 ROW MARKER | (5310) - DMI NUTRI-TILL'R - 6 & 8 ROW (1/00-12/09) |
| (75.200.11) - 16-30 ROW MARKER | (5310) - DMI NUTRI-TILL'R - 6 & 8 ROW (1/00-12/09) |
| (75.200.10) - 8-30 ROW MARKER | (5310) - NUTRI-TILLER - MOUNTED (1/02-12/12) |
| (75.200.11) - 12-30 OR 8-38 ROW MARKER | (5310) - NUTRI-TILLER - MOUNTED (1/02-12/12) |
| (75.200.12) - 16-30 ROW MARKER | (5310) - NUTRI-TILLER - MOUNTED (1/02-12/12) |
| (35.100.02) - 12 AND 16 ROW ONLY 2006 MODEL YEAR AND PRIOR | (5310) - NUTRI-TILLER - PULL TYPE (1/02-12/12) |
| (35.100.03) - 16 ROW ONLY 2007 MODEL YEAR AND AFTER | (5310) - NUTRI-TILLER - PULL TYPE (1/02-12/12) |
| (39.110.02) - REAR HITCH | (5310) - NUTRI-TILLER - PULL TYPE (1/02-12/12) |
| (75.200.12) - SINGLE FOLD ROW MARKER | (5310) - NUTRI-TILLER - PULL TYPE (1/02-12/12) |
| (75.200.13) - DOUBLE FOLD ROW MARKER | (5310) - NUTRI-TILLER - PULL TYPE (1/02-12/12) |
| (35.100.01) - LIFT HYDRAULICS | (9000) - DMI NUTRI-PLACR - CADDY UNIT (1/97-12/02) |
| (35.944.AI[02]) - 25 FOOT HYDRAULIC HOSE ROUTING | (500) - PRECISION DISK DRILL 25FT, 30FT, & 40FT (10/12-) |
| (35.944.AI[04]) - 30 FOOT HYDRAULIC HOSE ROUTING | (500) - PRECISION DISK DRILL 25FT, 30FT, & 40FT (10/12-) |
| (35.944.AI[06]) - 40 FOOT 7.5 INCH HYDRAULIC MOUNTING LAYOUT | (500) - PRECISION DISK DRILL 25FT, 30FT, & 40FT (10/12-) |
| (35.944.AI[08]) - 40 FOOT 10 INCH HYDRAULIC MOUNTING LAYOUT | (500) - PRECISION DISK DRILL 25FT, 30FT, & 40FT (10/12-) |
| (35.560.AA[02]) - HYDRAULICS 50 FOOT | (500) - PRECISION DISK DRILL 50FT - 10IN SPACING (1/14-) |
| (35.560.AA[02]) - HYDRAULICS 50 FOOT | (500) - PRECISION DISK DRILL 50FT - 7.5IN SPACING (1/14-11/16) |
| (35.560.AA[04]) - HYDRAULICS 60 FOOT | (500) - PRECISION DISK DRILL 60FT - 10IN SPACING (1/14-) |
| (35.560.AA[04]) - HYDRAULICS 60 FOOT | (500) - PRECISION DISK DRILL 60FT - 7.5IN SPACING (1/14-12/16) |
| (35.944.AI[02]) - 25 FOOT HYDRAULIC HOSE ROUTING | (500T) - PRECISION DISK (2/13-) |
| (35.944.AI[04]) - 30 FOOT HYDRAULIC HOSE ROUTING | (500T) - PRECISION DISK (2/13-) |
| (35.944.AI[06]) - 40 FOOT 7.5 INCH HYDRAULIC MOUNTING LAYOUT | (500T) - PRECISION DISK (2/13-) |
| (35.944.AI[08]) - 40 FOOT 10 INCH HYDRAULIC MOUNTING LAYOUT | (500T) - PRECISION DISK (2/13-) |
| (9-008) - FRONT HITCH SINGLE DRILL | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-010) - SINGLE DRILL HITCH | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (9-056) - BASIC HITCH AND CONNECTIONS, SINGLE DRILL HEAVY DUTY HITCH | (7100) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-048) - BASIC HITCH AND CONNECTIONS, SINGLE DRILL HEAVY DUTY HITCH | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-02) - HITCH DRAWPOLE, REAR TOW AIRSYSTEM | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (9-04) - MAIN FRAME 3 RANK | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (9-06) - MAIN FRAME 4 RANK | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (9-24) - CASTER WHEEL ASSEMBLY - DUAL, MAIN FRAMES AND WING FRAMES | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (9-28) - CASTER WHEEL ASSEMBLY - SINGLE, WING FRAMES 24 FEET AND UNDER | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (8-028) - ENDWISE TRANSPORT WHL HYD SYS, CYCLO AIR TRAILING 12 ROW NARROW& 8 ROW, PLATE TRAILING, 8 ROW NARROW | (900) - CASE IH PLANTER (1/87-12/95) |
| (8-040) - WING FRAME HYDRAULIC SYSTEM, CYCLO AIR HORIZONTAL FOLDING, ALL ROW SIZES | (900) - CASE IH PLANTER (1/87-12/95) |
| (9-014) - MAIN FRAME, CYCLO AIR HORIZONTAL FOLDING, ALL ROW SIZES | (900) - CASE IH PLANTER (1/87-12/95) |
| (9-074) - DRIVE WHEELS, CYCLO AIR HORIZONTAL FOLDING, ALL ROW SIZES | (900) - CASE IH PLANTER (1/87-12/95) |
| (9-294) - COU-TILL ATTACHMENT, CYCLO AIR & PLATE TRAILING, ALL ROW SIZES | (900) - CASE IH PLANTER (1/87-12/95) |
| (8-058) - ENDWISE TRANSPORT WHEEL HYDRAULIC SYSTEM, 8 ROW NARROW, RIGID | (950) - CASE IH TRAILING PLANTER (7/89-12/95) |
| (8-060) - ASSIST WHEEL HYDRAULIC SYSTEM, 8 ROW WIDE AND 12 ROW NARROW, VERTICAL FOLD | (950) - CASE IH TRAILING PLANTER (7/89-12/95) |
| (8-056) - CART WHEEL LIFT HYDRAULIC SYSTEM, 12 ROW NARROW - PARALLEL FRONT FOLD | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (8-058) - DRIVE/GAUGE WHEEL LIFT HYDRAULIC SYSTEM, 12 ROW NARROW - PARALLEL FRONT FOLD | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (8-074) - ENDWISE TRANSPORT WHEEL HYDRAULIC SYSTEM, 8 ROW NARROW - RIGID | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (8-076) - ASSIST WHEEL HYDRAULIC SYSTEM, 8 ROW WIDE AND 12 ROW NARROW VERTICAL FOLD | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (08-004) - CENTER SECTION GROUP, 75' | (3185) - PATRIOT SPRAYER (8/04-5/09) |
| (08-008) - CENTER SECTION GROUP, 90' | (3185) - PATRIOT SPRAYER (8/04-5/09) |
| (08-001) - MAST GROUP, 60' STD BOOM | (SPX3310) - SPRAYER (11/04-5/09) |
| (9-08) - GAUGE WHEEL ATTACHMENT, 10 SUBSOIL CHISEL, 5, 7 AND 9 SHANK | (10) - CASE IH SUBSOIL CHISEL (1/87-12/93) |
| (39.100.02) - DISC ATTACHMENT | (1300) - DMI ECOLO-CHAMP COLTER CHISEL (1/85-12/92) |
| (9-16) - MAIN FRAME AND SMV EMBLEM, 14 SUBSOIL CHISEL, 9 SHANK BASIC | (14) - CASE IH SUBSOIL CHISEL (11/89-12/94) |
| (75.200.07) - 22 SPRING COULTER ASSEMBLY | (2500) - CASE IH RIP-BED (2/04-) |
| (75.200.07[01]) - 22" SPRING COULTER ASSEMBLY | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (75.200.07) - 22 SPRING COULTER ASSEMBLY | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (75.200.22) - SINGLE FOLD ROW MARKER | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (75.200.23) - DOUBLE FOLD ROW MARKER | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (75.200.07[01]) - 22" SPRING COULTER ASSEMBLY | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (75.200.07) - 22 SPRING COULTER ASSEMBLY | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (75.200.22) - SINGLE FOLD ROW MARKER | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (75.200.23) - DOUBLE FOLD ROW MARKER | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (75.200.07) - 22" SPRING COULTER ASSEMBLY | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (75.200.22) - SINGLE FOLD ROW MARKER | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (75.200.23) - DOUBLE FOLD ROW MARKER | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (35.100.07) - PULL HITCH HYDRAULICS | (2500 ECOLO-TIL) - PULL HITCH - DMI (2/04-) |
| (39.100.02) - DISC ATTACHMENT | (530B) - DMI ECOLO-TIGER (1/97-12/07) |
| (39.100.02) - DISC ATTACHMENT | (530B) - ECOLO-TIGER MULCH CHISEL (1/97-12/05) |
| (35.100.01) - MAIN FRAME HYDRAULIC | (530C) - CASE IH ECOLO-TIGER (8/06-12/08) |
| (39.100.02) - DISK FRAME | (530C) - CASE IH ECOLO-TIGER (8/06-12/08) |
| (35.100.01) - MAIN FRAME HYDRAULIC | (530C) - DMI ECOLO-TIGER (1/06-12/06) |
| (39.100.02) - DISK FRAME | (530C) - DMI ECOLO-TIGER (1/06-12/06) |
| (9-104) - WING LIFT HINGES - REAR, LEVEL LIFT MODELS, FLAT FOLD, 17 FOOT THROUGH 21 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-108) - WING LIFT HINGES - REAR, LEVEL LIFT MODELS, FLAT FOLD, 23 FOOT THROUGH 27 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-116) - SECONDARY WING LIFT HINGES - REAR, LEVEL LIFT MODELS, DOUBLE FOLD, 41 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-120) - SECONDARY WING LIFT HINGES - REAR, LEVEL LIFT MODELS, DOUBLE FOLD, 47 FOOT THROUGH 53 FOOT WIDE | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-166) - LEVEL LIFT TRACTOR HITCH, FRONT ADJUSTABLE HITCH, ALL LEVEL LIFT MODELS | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-168) - LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS, LEVEL LIFT MODELS, FLAT FOLD | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-170) - LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS. LEVEL LIFT MODELS, VERTICAL AND DOUBLE FOLD | (5600) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-104) - WING LIFT HINGES - REAR, LEVEL LIFT MODELS, FLAT FOLD, 17 FOOT THROUGH 21 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-108) - WING LIFT HINGES - REAR, LEVEL LIFT MODELS, FLAT FOLD, 23 FOOT THROUGH 27 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-116) - SECONDARY WING LIFT HINGES - REAR, LEVEL LIFT MODELS, DOUBLE FOLD, 41 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-120) - SECONDARY WING LIFT HINGES - REAR, LEVEL LIFT MODELS, DOUBLE FOLD, 47 FOOT THROUGH 53 FOOT WIDE | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-166) - LEVEL LIFT TRACTOR HITCH, FRONT ADJUSTABLE HITCH, ALL LEVEL LIFT MODELS | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-168) - LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS, LEVEL LIFT MODELS, FLAT FOLD | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-170) - LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS. LEVEL LIFT MODELS, VERTICAL AND DOUBLE FOLD | (5700) - CASE IH CHISEL PLOW (1/84-12/94) |
| (9-34) - REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD - | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-38) - REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD - | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-48) - REAR SECONDARY WING LIFT HINGE, AND CYLINDER MOUNTING | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-50) - FRONT AND REAR SECONDARY WING LIFT HINGES, AND CYLINDER | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-76) - LEVEL LIFT HITCH, FRONT ADJUSTABLE HITCH | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-78) - LEVEL LIFT HITCH, BRACES AND BEAMS, FLAT FOLD | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (9-80) - LEVEL LIFT HITCH, BRACES AND BEAMS, VERTICAL FOLD AND DOUBLE | (5800) - CASE IH CHISEL PLOW (1/84-12/00) |
| (09-34) - REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD, RIGID, 19 FOOT THROUGH 23 FOOT WIDE | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-38) - REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD, FLOATING, 25 FOOT AND 27 FOOT WIDE | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-48) - REAR SECONDARY WING LIFT HINGE AND CYLINDER MOUNTING, DOUBLE FOLD, RIGID, 43 FOOT AND 45 FOOT WIDE | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-50) - FRONT AND REAR SECONDARY WING LIFT HINGES & CYLINDER MTG, DOUBLE FOLD, FLOATING, 49' THRU 53' WIDE | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-76) - LEVEL LIFT HITCH, FRONT ADJUSTABLE HITCH | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-78) - LEVEL LIFT HITCH, BRACES AND BEAMS, FLAT FOLD | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (09-80) - LEVEL LIFT HITCH, BRACES AND BEAMS, VERTICAL FOLD AND DOUBLE FOLD | (5850) - CASE IH CHISEL PLOW (1/96-12/00) |
| (39.100.02) - DISC ATTACHMENT | (6700) - CHISEL PLOW (1/00-12/06) |
| (002) - DISC ATTACHMENT | (6700) - COULTER CHISEL (1/00-12/06) |
| (39.100.02) - DISC ATTACHMENT | (6750) - CHISEL PLOW (1/00-12/06) |
| (002) - DISC ATTACHMENT | (6750) - PARABOLIC CHISEL (1/00-12/06) |
| (39.100.02) - DISC ATTACHMENT | (730B) - DMI ECOLO-TIGER (1/97-12/07) |
| (39.100.02) - DISC ATTACHMENT | (730B) - ECOLO-TIGER MULCH CHISEL (1/02-12/05) |
| (35.100.01) - MAIN FRAME HYDRAULIC | (730C) - CASE IH ECOLO-TIGER (1/06-12/15) |
| (39.100.02) - DISK FRAME | (730C) - CASE IH ECOLO-TIGER (1/06-12/15) |
| (35.100.01) - MAIN FRAME HYDRAULIC | (730C) - DMI ECOLO-TIGER (1/05-12/05) |
| (39.100.02) - DISK FRAME | (730C) - DMI ECOLO-TIGER (1/05-12/05) |
| (39.100.02) - DISC ATTACHMENT | (900) - DMI ECOLO-CHAMP COLTER CHISEL (1/85-12/92) |
| (09-008) - FRAME - FOLDING, 8 ROW NARROW (Jun 14 2010 7:53:00.2562 AM) | (1830) - CASE IH CULTIVATOR (1/92-12/05) |
| (09-010) - FRAME - FOLDING, 8 ROW WIDE, 12 ROW NARROW, 12 ROW WIDE AND 16 ROW NARROW (Jun 14 2010 7:53:00.2563 AM) | (1830) - CASE IH CULTIVATOR (1/92-12/05) |
| (09-008) - FRAME - FOLDING, 8 ROW NARROW (Jun 14 2010 7:53:00.2558 AM) | (1830) - CASE IH CULTIVATOR (1/92-12/05) |
| (09-010) - FRAME - FOLDING, 8 ROW WIDE, 12 ROW NARROW, 12 ROW WIDE AND 16 ROW NARROW (Jun 14 2010 7:53:00.2559 AM) | (1830) - CASE IH CULTIVATOR (1/92-12/05) |
| (35.100.01) - HYDRAULICS SINGLE FOLD MODELS 12-1/2 THROUGH 38-1/2 | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (35.100.05) - DOUBLE FOLD WING LIFT HYDRAULICS 38-1/2 THROUGH 46-1/2 | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (35.100.06) - DOUBLE FOLD WING LIFT HYDRAULICS 46-1/2 THROUGH 50-1/2 | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (35.100.07) - FRONT WING LIFT HYDRAULICS OPTION 38-1/2 THROUGH 46-1/2 | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (35.100.08) - FRONT WING LIFT HYDRAULICS OPTION 46-1/2 THROUGH 50-1/2 | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (35.100.09) - WING FOLD HYDRAULICS 54-1/2 THROUGH 60-1/2 | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (39.100.05) - 54-1/2 THROUGH 60-1/2 DOUBLE FOLD MAIN FRAME AND TRUSSES | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (39.100.06) - 54-1/2 THROUGH 60-1/2 DOUBLE FOLD LIFT SYSTEM AND PULL FRAME | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (39.100.07) - WING FRAME SINGLE FOLD 12-1/2 THROUGH 38-1/2 | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (39.100.09) - DOUBLE FOLD OUTER WING 38-1/2 THROUGH 50-1/2 MODELS | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (39.100.10) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (9-036) - REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD, RIGID | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-040) - REAR WING LIFT HINGE AND CYLINDER MOUNTING, FLAT FOLD, FLOATING | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-054) - FRONT SECONDARY WING LIFT HINGE AND CYLINDER MOUNTING, LOW TRANSPORT, DOUBLE FOLD, RIGID | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-058) - FRONT SECONDARY WING LIFT HINGE, AND CYLINDER MOUNTING, LOW TRANSPORT, DOUBLE FOLD, FLOATING | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-064) - REAR SECONDARY WING LIFT HINGE AND CYLINDER MOUNTING, STANDARD TRANSPORT, DOUBLE FOLD, RIGID | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-066) - FRONT & REAR SECONDARY WING LIFT HINGES & CYLINDER MOUNTING, STD TRANSPORT, DOUBLE FOLD, FLOATING | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-088) - LEVEL LIFT HITCH, NARROW TRANSPORT, FRONT ADJUSTABLE HITCH | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-090) - LEVEL LIFT HITCH, LOW TRANSPORT AND STANDARD TRANSPORT, FRONT ADJUSTABLE HITCH | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-094) - LEVEL LIFT HITCH, LOW TRANSPORT AND STANDARD TRANSPORT, BRACES AND BEAMS | (4300) - CASE IH FIELD CULTIVATOR (9/97-12/00) |
| (9-22) - LEVEL LIFT TRACTOR HITCH, FRONT ADJUSTABLE HITCH | (4800) - CASE IH VIBRA SHANK FIELD CULTIVATOR (9/87-12/95) |
| (9-26) - LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS, UNITS WITH CENTER HITCH TUBE | (4800) - CASE IH VIBRA SHANK FIELD CULTIVATOR (9/87-12/95) |
| (08-01) - HYDRAULICS | (TIGER-MATE) - - DMI DOUBLE FOLD FIELD CULTIVATOR (10/04-3/12) |
| (35.100.01) - HYDRAULICS SINGLE FOLD MODELS 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (35.100.04) - DOUBLE FOLD WING LIFT HYDRAULICS 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (35.100.05) - DOUBLE FOLD WING LIFT HYDRAULICS 48-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (35.100.06) - FRONT WING LIFT HYDRAULICS OPTION 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (35.100.07) - FRONT WING LIFT HYDRAULICS OPTION 48-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (35.100.08) - WING FOLD HYDRAULICS 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.06) - 54-1/2 THROUGH 60-1/2 DOUBLE FOLD LIFT SYSTEM AND PULL FRAME | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.07) - WING FRAME SINGLE FOLD 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.10) - DOUBLE FOLD OUTER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (35.100.01) - HYDRAULICS SINGLE FOLD MODELS 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (35.100.04) - DOUBLE FOLD WING LIFT HYDRAULICS 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (35.100.05) - DOUBLE FOLD WING LIFT HYDRAULICS 48-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (35.100.06) - FRONT WING LIFT HYDRAULICS OPTION 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (35.100.07) - FRONT WING LIFT HYDRAULICS OPTION 48-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (35.100.08) - WING FOLD HYDRAULICS 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.06) - 54-1/2 THROUGH 60-1/2 DOUBLE FOLD LIFT SYSTEM AND PULL FRAME | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.07) - WING FRAME SINGLE FOLD 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.10) - DOUBLE FOLD OUTER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (35.100.01) - HYDRAULICS SINGLE FOLD MODELS 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (35.100.04) - DOUBLE FOLD WING LIFT HYDRAULICS 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (35.100.05) - DOUBLE FOLD WING LIFT HYDRAULICS 48-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (35.100.06) - FRONT WING LIFT HYDRAULICS OPTION 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (35.100.07) - FRONT WING LIFT HYDRAULICS OPTION 48-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (35.100.08) - WING FOLD HYDRAULICS 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.06) - 54-1/2 THROUGH 60-1/2 DOUBLE FOLD LIFT SYSTEM AND PULL FRAME | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.07) - WING FRAME SINGLE FOLD 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.10) - DOUBLE FOLD OUTER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (35.100.01) - HYDRAULICS SINGLE FOLD MODELS 12-1/2 THROUGH 38-1/2 | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (35.100.05) - DOUBLE FOLD WING LIFT HYDRAULICS 38-1/2 THROUGH 46-1/2 | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (35.100.06) - DOUBLE FOLD WING LIFT HYDRAULICS 46-1/2 THROUGH 50-1/2 | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (35.100.07) - FRONT WING LIFT HYDRAULICS OPTION 38-1/2 THROUGH 46-1/2 | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (35.100.08) - FRONT WING LIFT HYDRAULICS OPTION 46-1/2 THROUGH 50-1/2 | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (35.100.09) - WING FOLD HYDRAULICS 54-1/2 THROUGH 60-1/2 | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.05) - 54-1/2 THROUGH 60-1/2 DOUBLE FOLD MAIN FRAME AND TRUSSES | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.06) - 54-1/2 THROUGH 60-1/2 DOUBLE FOLD LIFT SYSTEM AND PULL FRAME | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.07) - WING FRAME SINGLE FOLD 12-1/2 THROUGH 38-1/2 | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.09) - DOUBLE FOLD OUTER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.10) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (35.100.01) - HYDRAULICS SINGLE FOLD MODELS 12-1/2 THROUGH 38-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (35.100.04) - DOUBLE FOLD WING LIFT HYDRAULICS 38-1/2 THROUGH 46-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (35.100.05) - DOUBLE FOLD WING LIFT HYDRAULICS 48-1/2 THROUGH 50-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (35.100.06) - FRONT WING LIFT HYDRAULICS OPTION 38-1/2 THROUGH 46-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (35.100.07) - FRONT WING LIFT HYDRAULICS OPTION 48-1/2 THROUGH 50-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (35.100.08) - WING FOLD HYDRAULICS 54-1/2 THROUGH 60-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (39.100.06) - 54-1/2 THROUGH 60-1/2 DOUBLE FOLD LIFT SYSTEM AND PULL FRAME | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (39.100.07) - WING FRAME SINGLE FOLD 12-1/2 THROUGH 38-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (39.100.10) - DOUBLE FOLD OUTER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (8-03) - WING CYLINDER HYDRAULICS, MODELS WITH TIE ROD TYPE CYLINDERS | (485) - CASE IH DISK HARROW (1/75-12/02) |
| (8-04) - TRANSPORT LIFT CYLINDER HYDRAULICS, MODELS WITH TIE ROD TYPE CYLINDERS, HYDRAULIC COUPLERS | (485) - CASE IH DISK HARROW (1/75-12/02) |
| (9-02) - HITCH | (485) - CASE IH DISK HARROW (1/75-12/02) |
| (9-04) - TRANSPORT LIFT AXLE | (485) - CASE IH DISK HARROW (1/75-12/02) |
| (9-05) - TRANSPORT LIFT AXLE, 6 BOLT HEAVY HUB | (485) - CASE IH DISK HARROW (1/75-12/02) |
| (8-02) - TRANSPORT LIFT HYDRAULIC CIRCUIT, HOSES WITH FEMALE ENDS, WITHOUT DIVERTER VALVE | (501) - CASE IH DISK HARROW (1/76-12/02) |
| (8-05) - WING LIFT HYDRAULIC CIRCUIT, 3/8 INCH ID SUPPLY AND RETURN HOSES, 93 INCH HOSE CROSS TO TEE, ITEM 7 | (501) - CASE IH DISK HARROW (1/76-12/02) |
| (9-02) - HITCH | (501) - CASE IH DISK HARROW (1/76-12/02) |
| (9-04) - TRANSPORT LIFT AXLE | (501) - CASE IH DISK HARROW (1/76-12/02) |
| (9-05) - TRANSPORT LIFT AXLE, 6 BOLT HEAVY HUB | (501) - CASE IH DISK HARROW (1/76-12/02) |
| (9-04) - HITCH | (696) - CASE IH TRAILER DISK HARROW (1/79-12/92) |
| (9-08) - MAIN WHEEL SUPPORT | (696) - CASE IH TRAILER DISK HARROW (1/79-12/92) |
| (08-04) - TRANSPORT LIFT HYDRAULIC CIRCUIT, 3/8 INCH ID HOSES W/FEMALE ENDS, DISK HARROWS CODED D, E, F AND G | (770) - CASE IH DISK HARROW (1/96-12/02) |
| (08-06) - TRANSP. LIFT HYD. CIRCUIT, 1/2 INCH ID HOSES AND NO DIVERTER VALVE, DISK HARROWS CODED H AND J | (770) - CASE IH DISK HARROW (1/96-12/02) |
| (08-07) - WING LIFT HYD. CIRCUIT, 3/8 INCH ID HOSES, ADAPTERS AT CYLINDERS, NO DIVERTER VALVE, CODED H AND J | (770) - CASE IH DISK HARROW (1/96-12/02) |
| (08-08) - WING LIFT HYD. CIRCUIT, 3/8 INCH ID HOSES, W/O ADAPTERS AT CYLINDERS, NO DIVERTER VALVE, CODED H & J | (770) - CASE IH DISK HARROW (1/96-12/02) |
| (08-10) - TRANSP. LIFT HYDR. CIRCUIT, 1/2 INCH ID HOSES, W/DIVERTER VALVE, DISK HARROWS CODE H & J | (770) - CASE IH DISK HARROW (1/96-12/02) |
| (08-13) - DUAL CYL. TRANS. LIFT HYD. CIRCUIT, W/TIE BOLT TYPE CYLS, 3/8 INCH ID HOSES, NO DIVERTER VALVE | (770) - CASE IH DISK HARROW (1/96-12/02) |
| (09-04) - TRANSPORT LIFT AXLE, USED WITH NON-FOLDING FRAME, DISK HARROW CODED D THROUGH G | (770) - CASE IH DISK HARROW (1/96-12/02) |
| (09-05) - TRANSPORT LIFT AXLE, USED WITH FOLDING FRAME, DISK HARROW CODED H AND J | (770) - CASE IH DISK HARROW (1/96-12/02) |
| (09-08) - HITCH, DISK HARROWS CODED D THROUGH J | (770) - CASE IH DISK HARROW (1/96-12/02) |
| (35.100.01) - TRANSPORT HYDRAULICS - MECHANICAL | (RMX790) - OFFSET DISK (12/04-) |
| (35.100.02) - TRANSPORT HYDRAULICS - SINGLE POINT DEPTH CONTROL | (RMX790) - OFFSET DISK (12/04-) |
| (35.100.03) - WING FOLD HYDRAULICS | (RMX790) - OFFSET DISK (12/04-) |
| (35.100.04) - LEVELING PULL FRAME HYDRAULICS | (RMX790) - OFFSET DISK (12/04-) |
| (39.100.01) - MAIN FRAME | (RMX790) - OFFSET DISK (12/04-) |
| (39.100.02) - PULL FRAME PARTS | (RMX790) - OFFSET DISK (12/04-) |
| (39.100.03) - TURNBUCKLE LEVELING ASSEMBLY PARTS | (RMX790) - OFFSET DISK (12/04-) |
| (39.100.05) - HYDRAULIC LEVELING ASSSEMBLY PARTS | (RMX790) - OFFSET DISK (12/04-) |
| (75.200.22) - WING CYLINDER EXTENSION ASSEMBLY | (RMX790) - OFFSET DISK (12/04-) |
| (35.100.01) - HYDRAULICS SINGLE FOLD MODELS 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (35.100.04) - DOUBLE FOLD WING LIFT HYDRAULICS 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (35.100.05) - DOUBLE FOLD WING LIFT HYDRAULICS 48-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (35.100.06) - FRONT WING LIFT HYDRAULICS OPTION 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (35.100.07) - FRONT WING LIFT HYDRAULICS OPTION 48-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (35.100.08) - WING FOLD HYDRAULICS 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.06) - 54-1/2 THROUGH 60-1/2 DOUBLE FOLD LIFT SYSTEM AND PULL FRAME | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.07) - WING FRAME SINGLE FOLD 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.10) - DOUBLE FOLD OUTER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (35.100.01) - HYDRAULICS SINGLE FOLD MODELS 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (35.100.04) - DOUBLE FOLD WING LIFT HYDRAULICS 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (35.100.05) - DOUBLE FOLD WING LIFT HYDRAULICS 48-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (35.100.06) - FRONT WING LIFT HYDRAULICS OPTION 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (35.100.07) - FRONT WING LIFT HYDRAULICS OPTION 48-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (35.100.08) - WING FOLD HYDRAULICS 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.06) - 54-1/2 THROUGH 60-1/2 DOUBLE FOLD LIFT SYSTEM AND PULL FRAME | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.07) - WING FRAME SINGLE FOLD 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.10) - DOUBLE FOLD OUTER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (35.100.01) - HYDRAULICS SINGLE FOLD MODELS 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (35.100.04) - DOUBLE FOLD WING LIFT HYDRAULICS 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (35.100.05) - DOUBLE FOLD WING LIFT HYDRAULICS 48-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (35.100.06) - FRONT WING LIFT HYDRAULICS OPTION 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (35.100.07) - FRONT WING LIFT HYDRAULICS OPTION 48-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (35.100.08) - WING FOLD HYDRAULICS 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.01) - SINGLE FOLD MAIN FRAME 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.02) - DOUBLE FOLD MAIN FRAME AND TRUSSES 38-1/2 THROUGH 50-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.03) - DOUBLE FOLD MAIN FRAME AND TRUSSES 54-1/2 THROUGH 60-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.06) - 54-1/2 THROUGH 60-1/2 DOUBLE FOLD LIFT SYSTEM AND PULL FRAME | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.07) - WING FRAME SINGLE FOLD 12-1/2 THROUGH 38-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.08) - DOUBLE FOLD INNER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.09) - 54-1/2 TO 60-1/2 DOUBLE FOLD INNER WING | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.10) - DOUBLE FOLD OUTER WING 38-1/2 THROUGH 50-1/2 MODELS | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.11) - 54-1/2 TO 60-1/2 DOUBLE FOLD OUTER WING | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (09-14) - HITCH | (4200) - CASE IH COMBO-MULCH FINISHER (1/92-12/00) |
| (9-16) - SHANK, AUTOMATIC TRIP | (6650) - CASE IH CONSER-TILL PLOW (10/87-12/97) |
| (9-20) - DISK MAIN FRAME AND STABILIZER | (6800) - CASE IH COMBO-MULCH RIPPER (10/94-12/02) |
| (75.200.01) - DISC ATTACHMENT | (9300) - DMI ECOLO-TIGER DISK RIPPER (1/98-12/06) |
| (75.200.01) - DISC ATTACHMENT | (9300) - ECOLO-TIGER DISK RIPPER (7/04-12/09) |
| (9-06) - FRAME, FOLDING, 20-1/2, 27-1/2 AND 30-1/2 FOOT HOE, PRIOR TO P.I.N. JAG0211512 | (181) - CASE IH ROTARY HOE (11/88-12/88) |
| (9-08) - FRAME, FOLDING, 41 FOOT HOE, PRIOR TO P.I.N. JAG 0211512 | (181) - CASE IH ROTARY HOE (11/88-12/88) |
| (9-10) - FRAME, FOLDING, WITH WELDED ON HITCHES, 20-1/2 FOOT HOE, P.I.N. JAG 0211512 AND AFTER | (181) - CASE IH ROTARY HOE (11/88-12/88) |
| (9-12) - FRAME, FOLDING, WITH WELDED ON HITCHES, 27-1/2, 30-1/2 AND 41 FOOT HOE, P.I.N. JAG 0211512 AND AFTER | (181) - CASE IH ROTARY HOE (11/88-12/88) |
| (39.100.01) - SINGLE FOLD FRAME | (CRUMBLER) - - DMI (1/87-12/06) |
| (39.100.01[01]) - SINGLE FOLD FRAME | (CRUMBLER) - 110 CASE IH CRUMBLER (1/04-) |
| (39.100.01) - SINGLE FOLD FRAME | (CRUMBLER) - 110 CASE IH CRUMBLER (1/04-) |
| (35.100.01) - TRANSPORT HYDRAULICS | (340) - TRUE-TANDEM DISK HARROW (5/03-6/15) |
| (75.200.01) - SPRING LEVELING PARTS | (340) - TRUE-TANDEM DISK HARROW (5/03-6/15) |
| (35.100.01) - TRANSPORT HYDRAULICS | (370 TRUE-TANDEM) - 19'-37' DISK HARROW (1/09-12/15) |
| (75.200.01) - SPRING LEVELING PARTS 22 - 34 FOOT UNITS | (370 TRUE-TANDEM) - 19'-37' DISK HARROW (1/09-12/15) |
| (75.200.02) - SPRING LEVELING PARTS 37 FOOT | (370 TRUE-TANDEM) - 19'-37' DISK HARROW (1/09-12/15) |
| (8-04) - HYDRAULIC FOLD SYSTEM | (3900) - CASE IH FLEX WING TANDEM DISK HARROW (1/91-12/97) |
| (9-08) - HITCH CRANK | (3900) - CASE IH FLEX WING TANDEM DISK HARROW (1/91-12/97) |
| (8-02) - HYDRAULIC FOLD SYSTEM | (3950) - CASE IH FLEX WING TANDEM DISK HARROW (1/96-12/00) |
| (9-05) - HITCH CRANK | (3950) - CASE IH FLEX WING TANDEM DISK HARROW (1/96-12/00) |
| (35.100.01) - TRANSPORT HYDRAULICS | (RMX340) - TANDEM DISK (6/03-12/09) |
| (75.200.01) - SPRING LEVELING PARTS | (RMX340) - TANDEM DISK (6/03-12/09) |
| (35.100.01) - TRANSPORT HYDRAULICS | (RMX370) - TANDEM DISK (6/03-12/09) |
| (75.200.01) - SPRING LEVELING PARTS 22 - 34 FOOT UNITS | (RMX370) - TANDEM DISK (6/03-12/09) |
| (75.200.02) - SPRING LEVELING PARTS 37 FOOT | (RMX370) - TANDEM DISK (6/03-12/09) |
| (9-26) - LEVEL LIFT TRACTOR HITCH, FRONT ADJUSTABLE HITCH | (4900) - CASE IH VIBRA TILLER (9/87-12/95) |
| (9-28) - LEVEL LIFT TRACTOR HITCH, BRACES AND BEAMS | (4900) - CASE IH VIBRA TILLER (9/87-12/95) |
| (35.100.01) - TRANSPORT HYDRAULICS | (330 TRUE-TANDEM) - 22'-34' DISK HARROW (8/07-12/14) |
| (75.200.01) - SPRING LEVELING PARTS | (330 TRUE-TANDEM) - 22'-34' DISK HARROW (8/07-12/14) |
| (9A-042) - UPPER FEED SYSTEM | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9E-18) - CROP MONITOR | (781) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/86) |
| (9A-042) - UPPER FEED SYSTEM | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (9E-18) - CROP MONITOR | (881) - INTERNATIONAL HARVESTER PULL-TYPE FORAGE HARVESTER (1/81-12/92) |
| (9-20) - AUGER, AUGER DRIVE AND RELATED PARTS, 56 BLOWER AUGER, AUGER DRIVE AND RELATED PARTS | (56) - INTERNATIONAL HARVESTER BLOWER (1/66-12/10) |
| (9-20) - AUGER, AUGER DRIVE AND RELATED PARTS, 56 BLOWER AUGER, AUGER DRIVE AND RELATED PARTS | (600) - INTERNATIONAL HARVESTER BLOWER (1/82-12/15) |
| (9-24) - AUGER AND DRIVE, 600 BLOWER | (600) - INTERNATIONAL HARVESTER BLOWER (1/82-12/15) |
| (9-34) - WHEELS, 600 BLOWER | (600) - INTERNATIONAL HARVESTER BLOWER (1/82-12/15) |
| (8-042) - HEADER LIFT CYLINDER SYSTEM, W/THIRD LIFT CYLINDER ATTACHMENT, PRIOR TO P.I.N. JJC0097190 | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (8-044) - HEADER LIFT CYLINDER SYSTEM, W/THIRD LIFT CYLINDER ATTACHMENT, P.I.N. JJC0097190 & AFTER | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (8-046) - HEADER LIFT CYLINDER SYSTEM, W/O THIRD LIFT CYLINDER ATTACHMENT, PRIOR TO P.I.N. JJC0097190 | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (8-048) - HEADER LIFT CYLINDER SYSTEM, W/O THIRD LIFT CYLINDER ATTACHMENT, P.I.N. JJC0097190 & AFTER | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (8-050) - HEADER LIFT CYLINDER | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (8-26) - HEADER LIFT CYLINDER SYSTEM, WITH THIRD LIFT CYLINDER | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (8-28) - HEADER LIFT CYLINDER SYSTEM, WITHOUT THIRD LIFT CYLINDER | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (8-30) - HEADER LIFT CYLINDER | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (8-046) - HEADER LIFT CYLINDER SYSTEM, WITH THIRD LIFT CYLINDER ATTACHMENT,PRIOR TO P.I.N. JJC0103800 | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (8-048) - HEADER LIFT CYLINDER SYSTEM, WITH THIRD LIFT CYLINDER ATTACHMENT, P.I.N. JJC0103800 AND AFTER | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (8-050) - HEADER LIFT CYLINDER SYSTEM, WITHOUT THIRD LIFT CYLINDER, PRIOR TO P.I.N. JJC0103800 | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (8-052) - HEADER LIFT CYLINDER SYSTEM, WITHOUT THIRD LIFT CYLINDER, P.I.N. JJC0103800 AND AFTER | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (8-054) - HEADER LIFT CYLINDER | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (8-24) - HEADER LIFT CYLINDER MOUNTING | (1680) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0045689) (NORTH AMERICA) (1/86-7/89) |
| (8-08) - HEADER LIFT CYLINDER | (1682) - CASE IH PULL-TYPE AXIAL-FLOW COMBINE (1/87-12/91) |
| (9-118) - GRAIN TANK UNLOADER BELT DRIVE, WITHOUT STRAW CHOPPER | (1682) - CASE IH PULL-TYPE AXIAL-FLOW COMBINE (1/87-12/91) |
| (9-120) - GRAIN TANK UNLOADER BELT DRIVE, WITH STRAW CHOPPER | (1682) - CASE IH PULL-TYPE AXIAL-FLOW COMBINE (1/87-12/91) |
| (8-22) - HEADER LIFT SYSTEM | (2144) - CASE IH AXIAL-FLOW COMBINE (1/95-12/97) |
| (9A-36) - FEEDER, LIFT BRACKET AND SUPPORTS | (2144) - CASE IH AXIAL-FLOW COMBINE (1/95-12/97) |
| (8-28) - HEADER LIFT SYSTEM | (2166) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (9A-36) - FEEDER, LIFT BRACKET AND SUPPORTS | (2166) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (8-28) - HEADER LIFT SYSTEM | (2188) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (9A-34) - FEEDER, LIFT BRACKET AND SUPPORTS | (2188) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (08-11) - HYDRAULICS - HEADER LIFT | (2344) - CASE IH AXIAL-FLOW COMBINE (1/98-1/02) |
| (09A-20) - FEEDER - SUPPORTS AND LIFT BRACKET | (2344) - CASE IH AXIAL-FLOW COMBINE (1/98-1/02) |
| (08-13) - HYDRAULICS - HEADER LIFT | (2366) - CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04) |
| (09A-20) - FEEDER - SUPPORTS AND LIFT BRACKET | (2366) - CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04) |
| (08-10) - HYDRAULICS - HEADER LIFT | (2377) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001&HAJ300000 (11/04-12/07) |
| (09A-16) - FEEDER - SUPPORTS AND LIFT BRACKET | (2377) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001&HAJ300000 (11/04-12/07) |
| (08-11) - HYDRAULICS - HEADER LIFT | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (09A-20) - FEEDER - SUPPORTS AND LIFT BRACKET | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (08-10) - HYDRAULICS - HEADER LIFT | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001 & HAJ300000 (1/98-12/07) |
| (09A-16) - FEEDER - SUPPORTS AND LIFT BRACKET | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001 & HAJ300000 (1/98-12/07) |
| (08-10) - HYDRAULICS - HEADER LIFT | (2388) - CASE IH AXIAL-FLOW COMBINE (RU) ASN HAJ300001 (10/06-12/07) |
| (09A-16) - FEEDER - SUPPORTS AND LIFT BRACKET | (2388) - CASE IH AXIAL-FLOW COMBINE (RU) ASN HAJ300001 (10/06-12/07) |
| (35.162.01) - HYDRAULICS - HEADER LIFT | (2577) - AXIAL-FLOW COMBINE (NA) ASN HAJ0300001 (1/06-12/07) |
| (60.110.17) - FEEDER - SUPPORTS AND LIFT BRACKET | (2577) - AXIAL-FLOW COMBINE (NA) ASN HAJ0300001 (1/06-12/07) |
| (35.162.01) - HYDRAULICS - HEADER LIFT | (2588) - CASE IH AXIAL-FLOW COMBINE (NA) ASN HAJ300001 (10/06-12/06) |
| (44.200.19[01]) - AXLE ASSEMBLY, REAR, NON - POWER GUIDE AXLE | (5130) - COMBINE TIER 4 (1/12-1/13) |
| (44.200.19[02]) - AXLE ASSEMBLY, REAR, POWER GUIDE AXLE | (5130) - COMBINE TIER 4 (1/12-1/13) |
| (44.200.19[01]) - AXLE ASSEMBLY, REAR, NON - POWER GUIDE AXLE | (6130) - COMBINE TIER 4 (1/12-1/13) |
| (44.200.19[02]) - AXLE ASSEMBLY, REAR, POWER GUIDE AXLE | (6130) - COMBINE TIER 4 (1/12-1/13) |
| (44.200.19[01]) - AXLE ASSEMBLY, REAR, NON - POWER GUIDE AXLE | (7130) - COMBINE TIER 4 (1/12-1/13) |
| (44.200.19[02]) - AXLE ASSEMBLY, REAR, POWER GUIDE AXLE | (7130) - COMBINE TIER 4 (1/12-1/13) |
| (8-28) - HEADER LIFT CYLINDER | (1670) - CASE IH HILLSIDE COMBINE (S/N JJC0080540 & AFTER) (8/90-12/91) |
| (8-42) - HEADER AND REEL PUMP DRIVE | (1670) - CASE IH HILLSIDE COMBINE (S/N JJC0080540 & AFTER) (8/90-12/91) |
| (8-84) - LEVELING CYLINDER | (1670) - CASE IH HILLSIDE COMBINE (S/N JJC0080540 & AFTER) (8/90-12/91) |
| (9D-22) - BASKET DOOR, ARMS, CHANNELS AND STRUTS, 4 ROW WIDE AND 5 ROW NARROW | (2055) - CASE IH COTTON EXPRESS COTTON PICKER (1/90-12/93) |
| (9D-23A) - BASKET DOOR, ARMS, CHANNELS AND STRUTS, 5 ROW WIDE | (2055) - CASE IH COTTON EXPRESS COTTON PICKER (1/90-12/93) |
| (9D-22) - BASKET DOOR, ARMS, CHANNELS AND STRUTS, 4 ROW WIDE AND 5 ROW NARROW, PRIOR TO P.I.N. JJC0156230 | (2155) - CASE IH COTTON EXPRESS COTTON PICKER (2/95-12/96) |
| (9D-23A) - BASKET DOOR, ARMS, CHANNELS AND STRUTS, 4 ROW WIDE AND 5 ROW NARROW, P.I.N. JJC0156230 AND AFTER | (2155) - CASE IH COTTON EXPRESS COTTON PICKER (2/95-12/96) |
| (9D-24) - BASKET DOOR, ARMS, CHANNELS AND STRUTS, 5 ROW WIDE, PRIOR TO P.I.N. JJC0156230 | (2155) - CASE IH COTTON EXPRESS COTTON PICKER (2/95-12/96) |
| (9D-25A) - BASKET DOOR, ARMS, CHANNELS AND STRUTS, 5 ROW WIDE, P.I.N. JJC0156230 AND AFTER | (2155) - CASE IH COTTON EXPRESS COTTON PICKER (2/95-12/96) |
| (09D-14) - BASKET DOOR - ARMS, CHANNELS AND STRUTS - BSN JFG010001 | (2555) - CASE IH COTTON EXPRESS COTTON PICKER (AFTER S/N JJC0249500) (8/00-12/05) |
| (09D-14) - BASKET DOOR | (2555) - CASE IH COTTON EXPRESS COTTON PICKER (BEFORE S/N JJC0249499) (1/97-7/00) |
| (09D-15) - BASKET DOOR, FRAME | (620) - CASE IH COTTON EXPRESS COTTON PICKER (9/06-) |
| (09D-21) - BASKET, LIFT - REAR | (620) - CASE IH COTTON EXPRESS COTTON PICKER (9/06-) |
| (80.200.18) - MODULE DOOR, SECONDARY | (625) - MODULE EXPRESS COTTON PICKER (6/06-12/10) |
| (80.200.18) - MODULE DOOR, SECONDARY | (635) - MODULE EXPRESS (1/08-7/13) |
| (9B-10) - FAN PULLEY LINKAGE, USED WITH 8 INCH DIAMETER IDLER PULLEY | (1800) - CASE IH COTTON HARVESTER (1/90-12/96) |
| (9C-16) - BASKET DOOR | (1800) - CASE IH COTTON HARVESTER (1/90-12/96) |
| (9B-22) - REAR FAN PULLEY LINKAGE | (1822) - CASE IH COTTON PICKER (S/N JJC0012691 & AFTER) (7/89-12/93) |
| (9B-22) - REAR FAN PULLEY LINKAGE | (1844) - CASE IH COTTON PICKER (S/N JJC0002462 & AFTER) (7/89-12/93) |
| (9C-20) - REAR FAN PULLEY LINKAGE, USED WITH 8 INCH DIAMETER IDLER PULLEY | (2044) - CASE IH COTTON PICKER (1/91-12/94) |
| (9D-36) - BASKET DOOR | (2044) - CASE IH COTTON PICKER (1/91-12/94) |
| (09D-16) - BASKET DOOR, FRAME - BSN JJC0250100 | (CPX610) - CASE IH COTTON PICKER (8/01-12/05) |
| (09D-17) - BASKET DOOR, FRAME - ASN JJC0250100 | (CPX610) - CASE IH COTTON PICKER (8/01-12/05) |
| (09D-22) - BASKET, LIFT - REAR | (CPX610) - CASE IH COTTON PICKER (8/01-12/05) |
| (09D-15) - BASKET DOOR, FRAME | (CPX620) - CASE IH COTTON PICKER (5/05-8/06) |
| (09D-21) - BASKET, LIFT - REAR | (CPX620) - CASE IH COTTON PICKER (5/05-8/06) |
| (06-004) - REEL BAT AND TINE TUBE ASSEMBLY (12 FOOT) | (525) - AUGER HEADER (12 FT.) (1/94-12/00) |
| (09-012) - GAUGE WHEEL KIT (12 FOOT) | (525) - AUGER HEADER (12 FT.) (1/94-12/00) |
| (06-008) - REEL BAT AND TINE TUBE ASSEMBLY (14 FOOT) | (525) - AUGER HEADER (14 FT.) (1/94-12/00) |
| (12.08) - TRAIL FRAME, LEFT SIDE | (DCX131) - PIVOT TONGUE DISC MOWER CONDITIONER (8/01-10/08) |
| (14.08) - HEADER SPRINGS | (DCX131) - PIVOT TONGUE DISC MOWER CONDITIONER (8/01-10/08) |
| (12.08) - TRAIL FRAME, LEFT SIDE | (DCX131F) - PIVOT TONGUE DISC MOWER CONDITIONER (9/07-10/08) |
| (14.06) - SPRINGS, HEADER | (DCX161) - PIVOT TONGUE DISC MOWER CONDITIONER (9/01-4/08) |
| (9-02) - MAIN FRAME AND HEADER FLOAT | (3309) - CASE IH MOWER CONDITIONER (3/89-12/92) |
| (6-06) - REEL BAT AND TINE TUBE ASSEMBLY, TINE TUBE ASSEMBLY A | (8380) - CASE IH CENTER PIVOT MOWER CONDITIONER (1/88-12/97) |
| (6-04) - REEL BAT AND TINE TUBE ASSEMBLY (12 FOOT), TINE TUBE ASSEMBLY "A" | (SC412) - CASE IH CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (9-16) - GAUGE WHEEL KIT (12 FOOT), (HK60561 GAUGE WHEEL KIT COMPLETE, TO BE ORDERED THRU WHOLEGOODS ONLY) | (SC412) - CASE IH CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (6-08) - REEL BAT AND TINE TUBE ASSEMBLY (14 FOOT), TINE TUBE ASSEMBLY "A" | (SC414) - CASE IH CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (6-10) - REEL BAT AND TINE TUBE ASSEMBLY, 14 FOOT, TINE TUBE ASSEMBLY A | (SC414) - CASE IH DELUXE CENTER PIVOT MOWER CONDITIONER (1/99-12/00) |
| (6-14) - REEL BAT AND TINE TUBE ASSEMBLY, 16 FOOT, TINE TUBE ASSEMBLY A | (SC416) - CASE IH DELUXE CENTER PIVOT MOWER CONDITIONER (5/99-12/00) |
| (4-06) - TINE ASSEMBLY, MODEL 8320 ONLY | (8320) - CASE IH MOWER CONDITIONER (1/88-12/01) |
| (9-06) - REEL BAT KIT, EXTRA, MODEL 8320 ONLY, HK10211 COMPLETE, TO BE ORDERED THRU WHOLEGOODS ONLY | (8320) - CASE IH MOWER CONDITIONER (1/88-12/01) |
| (4-08) - TINE ASSEMBLY, MODEL 8330 ONLY | (8330) - CASE IH MOWER CONDITIONER (1/88-12/01) |
| (9-08) - REEL BAT KIT, EXTRA, MODEL 8330, HK10212 COMPLETE, TO BE ORDERED THRU WHOLEGOODS ONLY | (8330) - CASE IH MOWER CONDITIONER (1/88-12/01) |
| (6-06) - REEL BAT & TINE ASSEMBLY, TINE TUBE ASSEMBLY "A" | (8340) - CASE IH MOWER CONDITIONER (1/89-12/01) |
| (6-08) - REEL BAT & TINE ASEMBLY, TINE TUBE ASSEMBLY "B" | (8340) - CASE IH MOWER CONDITIONER (1/89-12/01) |
| (6-06) - REEL BAT AND TINE TUBE ASSEMBLY, TINE TUBE ASSEMBLY "A" | (8350) - CASE IH MOWER CONDITIONER (1/88-12/97) |
| (6-08) - REEL BAT AND TINE TUBE ASSEMBLY, TINE TUBE ASSEMBLY "B" | (8350) - CASE IH MOWER CONDITIONER (1/88-12/97) |
| (9-14) - EXTRA REEL BAT KIT, HK60270 COMPLETE | (8350) - CASE IH MOWER CONDITIONER (1/88-12/97) |
| (6-10) - REEL BAT AND TINE TUBE ASSEMBLY, 12 FOOT, TINE TUBE ASSEMBLY "A" | (8360) - CASE IH 12FT MOWER CONDITIONER (1/89-12/92) |
| (6-14) - REEL BAT AND TINE TUBE ASSEMBLY, 14 FOOT, TINE TUBE ASSEMBLY "A" | (8360) - CASE IH 12FT MOWER CONDITIONER (1/89-12/92) |
| (9-26) - GAUGE WHEEL KIT, 12 FOOT, HK60561 COMPLETE, TO BE ORDERED THRU WHOLEGOODS ONLY | (8360) - CASE IH 12FT MOWER CONDITIONER (1/89-12/92) |
| (6-10) - REEL BAT AND TINE TUBE ASSEMBLY, 12 FOOT, TINE TUBE ASSEMBLY "A" | (8370) - CASE IH 14FT MOWER CONDITIONER (1/89-12/97) |
| (6-14) - REEL BAT AND TINE TUBE ASSEMBLY, 14 FOOT, TINE TUBE ASSEMBLY "A" | (8370) - CASE IH 14FT MOWER CONDITIONER (1/89-12/97) |
| (9-04) - MAIN FRAME, UPPER | (3204) - CASE IH DISC MOWER (1/87-12/88) |
| (9-04) - MAIN FRAME, UPPER | (3205) - CASE IH DISC MOWER (1/87-12/88) |
| (9-04) - MAIN FRAME, UPPER | (3206) - CASE IH DISC MOWER (1/87-12/88) |
| (006) - REAR AXLE, ADJUSTABLE | (WDX1101) - CASE IH SELF PROPELLED WINDROWER TRACTOR (10/01-11/04) |
| (006) - REAR AXLE, ADJUSTABLE | (WDX1701) - CASE IH SELF PROPELLED WINDROWER TRACTOR (11/01-11/04) |
| (006) - REAR AXLE, ADJUSTABLE | (WDX901) - CASE IH SELF PROPELLED WINDROWER TRACTOR (12/01-11/04) |
| (4-08) - REEL BAT AND TINE TUBE ASSEMBLY, 12 FOOT, TINE TUBE ASSEMBLY A | (8830) - AUGER HEADER (12 & 14 FT.) (4/96-12/97) |
| (4-12) - REEL BAT AND TINE TUBE ASSEMBLY, 14 FOOT, TINE TUBE ASSEMBLY A | (8830) - AUGER HEADER (12 & 14 FT.) (4/96-12/97) |
| (9-18) - GAUGE WHEEL KIT, 12 FOOT | (8830) - AUGER HEADER (12 & 14 FT.) (4/96-12/97) |
| (6-10) - REEL BAT AND TINE TUBE ASSEMBLY (14 FOOT), (S.N. CFH0032001 THRU CFH0032226) | (8840) - AUGER HEADER (14 & 16 FT.) (1/88-12/97) |
| (6-12) - REEL BAT AND TINE TUBE ASSEMBLY (14 FOOT), (S.N. CFH0032227 AND LATER) | (8840) - AUGER HEADER (14 & 16 FT.) (1/88-12/97) |
| (6-18) - REEL BAT AND TINE TUBE ASSEMBLY (16 FOOT), (S.N. CFH0032001 THRU CFH0032226) | (8840) - AUGER HEADER (14 & 16 FT.) (1/88-12/97) |
| (6-20) - REEL BAT AND TINE TUBE ASSEMBLY (16 FOOT), (S.N. CFH0032227 AND LATER) | (8840) - AUGER HEADER (14 & 16 FT.) (1/88-12/97) |
| (9-34) - MANURE FORK AND GRAPPLE | (1835C) - CASE UNI-LOADER SKID STEER LOADER (7/87-12/95) |
| (9-14) - MANURE FORK & GRAPPLE | (1838) - CASE UNI-LOADER SKID STEER LOADER (1/94-12/96) |
| (09-15) - MANURE FORK, GRAPPLE AND LOADER ATTACHMENT BAR | (1840) - CASE UNI-LOADER SKID STEER LOADER (1/89-12/01) |
| (09-018) - BALE ROLLER CHUTE KIT,HK40831 COMPLETE-INCLUDES PGS 9-18 THRU 9-21TO BE ORDERED THRU WHOLEGOODS ONLY | (8576) - CASE IH BALER AND ACCUMULATOR (1/98-12/00) |
| (03-016) - PICKUP ROTOR ASSEMBLY | (8576) - CASE IH BALER AND ACCUMULATOR (1/98-12/00) |
| (05-018) - FEEDER LINKAGE AND DOOR ASSEMBLY | (8576) - CASE IH BALER AND ACCUMULATOR (1/98-12/00) |
| (9-02) - UNIVERSAL DRAWBAR | (885) - DAVID BROWN DIESEL TRACTOR W/Q CAB (S/N 11000001 TO 11021851) (1/76-12/83) |
| (9-02) - UNIVERSAL DRAWBAR | (885N) - DAVID BROWN DIESEL TRACTOR W/Q CAB (S/N 11000001 TO 11021851) (1/76-12/83) |
