| Узел | Модель |
|---|
| (08) - MAIN DRIVE TRAIN | (3440) - CASE IH ROUND BALER (1/87-12/87) |
| (34) - POWER TAKE OFF DRIVE, PRIOR TO P.I.N. 001280 | (3450) - CASE IH ROUND TIE BALER (1/83-12/89) |
| (36) - POWER TAKE OFF DRIVE, P.I.N. 001281 AND AFTER | (3450) - CASE IH ROUND TIE BALER (1/83-12/89) |
| (08) - MAIN DRIVE TRAIN | (3640) - CASE IH ROUND BALER (1/86-12/87) |
| (56) - BELTS AND ROLLER ASSEMBLIES 13 AND 14 | (3640) - CASE IH ROUND BALER (1/86-12/87) |
| (28) - POWER TAKE OFF DRIVE, PRIOR TO P.I.N. 001530 | (3650) - CASE IH ROUND TIE BALER (1/84-12/88) |
| (30) - POWER TAKE OFF DRIVE, P.I.N. 001531 AND AFTER | (3650) - CASE IH ROUND TIE BALER (1/84-12/88) |
| (50) - BELTS AND ROLLER ASSEMBLIES 9 - 14, MACHINES WITH 1.378" (35 MM) ID BEARINGS, PRIOR TO P.I.N. 001530 | (3650) - CASE IH ROUND TIE BALER (1/84-12/88) |
| (54) - BELTS & ROLLER ASST 9 - 14, MACHINES WITH 1-1/4" (31 MM) ID HEX BORE BEARINGS, P.I.N. 001531 & AFTER | (3650) - CASE IH ROUND TIE BALER (1/84-12/88) |
| (C-18) - NEEDLES, DRIVE AND GUARD | (27) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/65-12/68) |
| (C-24) - KNOTTER DRIVE CHAIN AND IDLERS | (27) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/65-12/68) |
| (B-08) - BALE CHAMBER | (37) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/63-12/88) |
| (B-15) - PICKUP CYLINDER AND DRIVE | (37) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/63-12/88) |
| (B-21) - PLUNGER | (37) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/63-12/88) |
| (B-28) - NEEDLES AND GUIDES, FOR WIRE BALER | (37) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/63-12/88) |
| (15) - PLUNGER STOP AND BALE CHAMBER BOTTOM PLATE | (46) - MCCORMICK-INTERNATIONAL PICK UP RECTANGULAR BALER (1/57-12/63) |
| (34) - NEEDLE, NEEDLE PITMAN AND NEEDLE DRIVE SHIELD, FOR NO. 46-W BALER | (46) - MCCORMICK-INTERNATIONAL PICK UP RECTANGULAR BALER (1/57-12/63) |
| (56) - PICKUP CYLINDER | (46) - MCCORMICK-INTERNATIONAL PICK UP RECTANGULAR BALER (1/57-12/63) |
| (59) - PICKUP COVER | (46) - MCCORMICK-INTERNATIONAL PICK UP RECTANGULAR BALER (1/57-12/63) |
| (85) - FLOATING PICKUP WHEEL ATTACHMENT, SPECIAL | (46) - MCCORMICK-INTERNATIONAL PICK UP RECTANGULAR BALER (1/57-12/63) |
| (B-08) - BALE CHAMBER | (47) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/63-12/88) |
| (B-15) - PICKUP CYLINDER AND DRIVE | (47) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/63-12/88) |
| (B-21) - PLUNGER | (47) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/63-12/88) |
| (B-28) - NEEDLES AND GUIDES, FOR WIRE BALER | (47) - INTERNATIONAL HARVESTER RECTANGULAR BALER (1/63-12/88) |
| (D-2) - HITCH POLE AND BRACES, AND QUANTITY LEVER | (7) - INTERNATIONAL HARVESTER FERTILIZER DISTRIBUTOR (1/56-12/88) |
| (34) - FERTILIZER HOPPER UNIT | (150) - INTERNATIONAL HARVESTER SHOVEL PRESS DRILL (1/60-12/88) |
| (38) - FERTILIZER DRIVE UNIT | (150) - INTERNATIONAL HARVESTER SHOVEL PRESS DRILL (1/60-12/88) |
| (46) - SPRING TRIP FURROW OPENER, ON MACHINES BUILT PRIOR TO 1973 SEASON | (150) - INTERNATIONAL HARVESTER SHOVEL PRESS DRILL (1/60-12/88) |
| (48) - SPRING TRIP FURROW OPENER, ON MACHINES BUILT 1973 SEASON AND SINCE | (150) - INTERNATIONAL HARVESTER SHOVEL PRESS DRILL (1/60-12/88) |
| (50) - SHEAR TRIP FURROW OPENER, ON MACHINES BUILT PRIOR TO 1973 SEASON | (150) - INTERNATIONAL HARVESTER SHOVEL PRESS DRILL (1/60-12/88) |
| (52) - SHEAR TRIP FURROW OPENER, ON MACHINES BUILT 1975 SEASON AND SINCE | (150) - INTERNATIONAL HARVESTER SHOVEL PRESS DRILL (1/60-12/88) |
| (54) - POWER LIFT UNIT | (150) - INTERNATIONAL HARVESTER SHOVEL PRESS DRILL (1/60-12/88) |
| (A-02) - FRAME, ROCKSHAFT AND DRAWBAR MOUNTING | (510) - INTERNATIONAL HARVESTER END WHEEL GRAIN DRILL (1/68-12/79) |
| (A-20) - POWER LIFT | (510) - INTERNATIONAL HARVESTER END WHEEL GRAIN DRILL (1/68-12/79) |
| (B-02) - MAIN FRAME AND TRACTOR HITCH | (510) - INTERNATIONAL HARVESTER SEMI-MOUNTED GRAIN DRILL (1/68-12/79) |
| (D-02) - MAIN FRAME, FOOTBOARD AND TRACTOR HITCH | (5100) - INTERNATIONAL HARVESTER SEMI-MOUNTED GRAIN DRILL (1/68-12/79) |
| (W-10) - PRESS WHEEL, OPEN CENTER TYPE, ONE PER ROW | (54-SERIES) - MCCORMICK-INTERNATIONAL 12-ROW DRILL CORN PLANTERS (1/67-12/72) |
| (W-11) - PRESS WHEEL, PAN TYPE, ONE PER ROW | (54-SERIES) - MCCORMICK-INTERNATIONAL 12-ROW DRILL CORN PLANTERS (1/67-12/72) |
| (A-54) - POWER LIFT | (620) - INTERNATIONAL HARVESTER GRAIN DRILL (1/80-12/88) |
| (R-13) - HILL DROP, ONE PER ROW | (90) - INTERNATIONAL HARVESTER PLANTER (12/70-12/70) |
| (R-16) - DRILL UNIT, ONE PER ROW | (90) - INTERNATIONAL HARVESTER PLANTER (12/70-12/70) |
| (A-04) - HOPPER LID | (10) - INTERNATIONAL HARVESTER GRAIN DRILL (1/59-12/69) |
| (A-08) - TRACTOR HITCH | (10) - INTERNATIONAL HARVESTER GRAIN DRILL (1/59-12/69) |
| (A-30) - FERTILIZER DRIVE PARTS | (10) - INTERNATIONAL HARVESTER GRAIN DRILL (1/59-12/69) |
| (A-32) - POWER LIFT, SPECIAL | (10) - INTERNATIONAL HARVESTER GRAIN DRILL (1/59-12/69) |
| (D-07[1]) - GRASS SEED DRIVE | (10) - INTERNATIONAL HARVESTER SEMI-MOUNTED DRILL (1/59-12/69) |
| (D-12) - FERTILIZER FEED SHAFT | (10) - INTERNATIONAL HARVESTER SEMI-MOUNTED DRILL (1/59-12/69) |
| (D-14) - DRAWBAR PIVOT SHAFT | (10) - INTERNATIONAL HARVESTER SEMI-MOUNTED DRILL (1/59-12/69) |
| (B-03) - GRAIN AND FERTILIZER HOPPER LID | (100) - INTERNATIONAL HARVESTER PRESS DRILL (1/67-12/69) |
| (B-18) - POWER LIFT, SPECIAL | (100) - INTERNATIONAL HARVESTER PRESS DRILL (1/67-12/69) |
| (B-21) - FERTILIZER DRIVE PARTS | (100) - INTERNATIONAL HARVESTER PRESS DRILL (1/67-12/69) |
| (B-38) - SPRING CUSHION HITCH, 1964 SEASON | (100) - INTERNATIONAL HARVESTER PRESS DRILL (1/67-12/69) |
| (B-39) - SPRING CUSHION HITCH, 1965 SEASON AND SINCE | (100) - INTERNATIONAL HARVESTER PRESS DRILL (1/67-12/69) |
| (B-40) - SPRING CUSHION HITCH | (100) - INTERNATIONAL HARVESTER PRESS DRILL (1/67-12/69) |
| (E-39[A]) - SPEED CHANGE ATTACHMENT | (249) - MCCORMICK-INTERNATIONAL DRILL PLANTER (1/58-12/65) |
| (E-39[A]) - SPEED CHANGE ATTACHMENT | (250) - MCCORMICK-INTERNATIONAL POWER HILL DROP PLANTER (1/58-12/65) |
| (X-27) - MARKER UNIT | (251) - MCCORMICK-INTERNATIONAL PLANTER (1/55-12/74) |
| (X-31) - SEED FIRMING WHEEL ATTACHMENT, CANNOT BE USED WITH PLANTER | (251) - MCCORMICK-INTERNATIONAL PLANTER (1/55-12/74) |
| (X-32) - CORN AND PEA | (251) - MCCORMICK-INTERNATIONAL PLANTER (1/55-12/74) |
| (E-39[A]) - SPEED CHANGE ATTACHMENT | (449A) - MCCORMICK-INTERNATIONAL DRILL CORN PLANTER (1/57-12/65) |
| (E-39[A]) - SPEED CHANGE ATTACHMENT | (450A) - MCCORMICK-INTERNATIONAL POWER HILL DROP CORN PLANTER (1/57-12/65) |
| (G-11[A]) - PRESS WHEEL, OPEN CENTER TYPE, ONE PER ROW | (455) - MCCORMICK-INTERNATIONAL PLANTER (1/63-12/88) |
| (G-12) - PRESS WHEEL, PAN TYPE, ONE PER ROW, 1966 AND SINCE | (455) - MCCORMICK-INTERNATIONAL PLANTER (1/63-12/88) |
| (G-11[A]) - PRESS WHEEL, OPEN CENTER TYPE, ONE PER ROW | (456) - MCCORMICK-INTERNATIONAL PLANTER (1/63-12/88) |
| (G-12) - PRESS WHEEL, PAN TYPE, ONE PER ROW, 1966 AND SINCE | (456) - MCCORMICK-INTERNATIONAL PLANTER (1/63-12/88) |
| (J-10) - PRESS WHEEL, OPEN CENTER TYPE, ONE PER ROW | (466) - MCCORMICK-INTERNATIONAL 4-ROW COTTON & CORN PLANTER (1/58-12/66) |
| (J-11) - PRESS WHEEL, PAN TYPE, ONE PER ROW, 1966 ONLY | (466) - MCCORMICK-INTERNATIONAL 4-ROW COTTON & CORN PLANTER (1/58-12/66) |
| (E-39[A]) - SPEED CHANGE ATTACHMENT | (649) - MCCORMICK-INTERNATIONAL DRILL CORN PLANTER (1/58-12/65) |
| (E-39[A]) - SPEED CHANGE ATTACHMENT | (650) - MCCORMICK-INTERNATIONAL POWER HILL DROP CORN PLANTER (1/58-12/65) |
| (L-10) - PRESS WHEEL, OPEN CENTER TYPE, ONE PER ROW | (658) - MCCORMICK-INTERNATIONAL 6-ROW PLANTER (1/64-12/66) |
| (L-11) - PRESS WHEEL, PAN TYPE, ONE PER ROW, 1966 ONLY | (658) - MCCORMICK-INTERNATIONAL 6-ROW PLANTER (1/64-12/66) |
| (11) - CLYMER COULTER | (CONCORD) - CLYMER UTILITY COULTER (1/96-12/06) |
| (J-03) - 5000 VIBRA CHISEL, 17 FOOT WING, WING FRAME | (5000) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/79-12/88) |
| (B-14) - TWO POINT FAST HITCH, FOR 7 FOOT AND 11 FOOT TWO RANK MODELS, MACHINES PRIOR TO 1974 SEASON | (55) - INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (D-04) - 645 VIBRA CHISEL, 18 FOOT WING, WING FRAME | (645) - INTERNATIONAL HARVESTER VIBRA CHISEL (1/77-12/79) |
| (09-18) - FOLDING MARKERS STACKER | (2240) - CASE IH CULTIVATOR (10/99-12/05) |
| (B-12) - PEG TOOTH SECTION, HEAVY DUTY | (568) - INTERNATIONAL HARVESTER SEED BED CONDITIONER (1/75-12/00) |
| (B-23) - ROLLING BASKET MULCHER | (568) - INTERNATIONAL HARVESTER SEED BED CONDITIONER (1/75-12/00) |
| (10-14) - ROCKSHAFT | (300) - INTERNATIONAL HARVESTER DISKALL (1/67-12/77) |
| (10-30) - FERTILIZER SEEDING DRIVE | (300) - INTERNATIONAL HARVESTER DISKALL (1/67-12/77) |
| (26) - ROCKSHAFT | (300) - INTERNATIONAL HARVESTER DISKALL PLOW (1/54-12/81) |
| (44) - FERTILIZER SEEDING DRIVE | (300) - INTERNATIONAL HARVESTER DISKALL PLOW (1/54-12/81) |
| (AU-04) - CARRIER FRAME AND HITCH | (356) - INTERNATIONAL HARVESTER SPRING-TOOTH HARROW (1/75-12/85) |
| (A-16) - PEG TOOTH SECTION | (468) - INTERNATIONAL HARVESTER SEED BED CONDITIONER (1/75-12/84) |
| (M-09) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (209) - MCCORMICK INTERNATIONAL MOLDBOARD PLOW (1/58-12/88) |
| (M-09) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (209A) - MCCORMICK INTERNATIONAL MOLDBOARD PLOW (1/61-12/88) |
| (M-09) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (309) - MCCORMICK INTERNATIONAL MOLDBOARD PLOW (1/61-12/88) |
| (M-09) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (309A) - MCCORMICK INTERNATIONAL MOLDBOARD PLOW (1/61-12/88) |
| (U-07) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (312) - MCCORMICK-INTERNATIONAL 3-WAY MOLDBOARD PLOW (1/57-12/65) |
| (07-06) - TWO POINT FAST HITCH (7 FT & 11 FT DIRECT MOUNTED MODELS) | (55) - MCCORMICK-INTERNATIONAL CHISEL PLOW (1/63-12/88) |
| (R-2) - SECTION, 11 AND 16IN. TEETH | (9 COIL) - MCCORMICK-INTERNATIONAL SPRING-TOOTH HARROW (1/68-12/72) |
| (P-07) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (211) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/57-12/62) |
| (P-07) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (311) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/57-12/70) |
| (U-07) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (412) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/57-12/65) |
| (9-18) - ROLLING COULTER, SPRING CUSHION TYPE (PLATE) | (450) - CASE IH MOLDBOARD PLOW (1/84-12/93) |
| (9-20) - ROLLING COULTER, HIGH LIFT SPRING CUSHION TYPE (PLATE) | (450) - CASE IH MOLDBOARD PLOW (1/84-12/93) |
| (X-06) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (512) - INTERNATIONAL HARVESTER 5-FURROW MOLDBOARD PLOW (1/59-12/65) |
| (C-06) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (60) - INTERNATIONAL HARVESTER 2-FURROW MOLDBOARD PLOW (1/58-12/69) |
| (D-07) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (60) - INTERNATIONAL HARVESTER MOLDBOARD PLOW (1/60-12/70) |
| (D-07) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (60L) - INTERNATIONAL HARVESTER 3-FURROW MOLDBOARD PLOW (1/58-12/70) |
| (AD-02) - CARRIER, DRIVE, FRAME AND BEAMS | (641) - INTERNATIONAL HARVESTER 2-WAY 4-FURROW MOLDBOARD PLOW (1/63-12/64) |
| (E-06) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (70) - INTERNATIONAL HARVESTER 3-FURROW MOLDBOARD PLOW (1/58-12/68) |
| (F-07) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (70) - INTERNATIONAL HARVESTER 4-FURROW MOLDBOARD PLOW (1/58-12/68) |
| (G-07) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (70) - INTERNATIONAL HARVESTER 6-FURROW MOLDBOARD PLOW (1/65-12/68) |
| (E-06) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (70L) - INTERNATIONAL HARVESTER 3-FURROW MOLDBOARD PLOW (1/58-12/72) |
| (F-07) - HEAVY-DUTY ROLLING COLTER, CUSHION SPRING TYPE, ONE PER FURROW | (70L) - INTERNATIONAL HARVESTER 4-FURROW MOLDBOARD PLOW (1/58-12/72) |
| (8-2) - HYDRAULIC EQUIPMENT, REAR FURROW WHEEL | (730) - CASE IH MOLDBOARD PLOW (1/88-12/91) |
| (9-22) - ROLLING COLTER, HIGH LIFT SPRING CUSHION TYPE WITH BENT STANDARD | (730) - CASE IH MOLDBOARD PLOW (1/88-12/91) |
| (9-24) - ROLLING COLTER, HIGH LIFT SPRING CUSHION TYPE WITH 20 INCH DISC | (730) - CASE IH MOLDBOARD PLOW (1/88-12/91) |
| (9-26) - ROLLING COLTER, HIGH LIFT SPRING CUSHION TYPE WITH 22 INCH DISC | (730) - CASE IH MOLDBOARD PLOW (1/88-12/91) |
| (8-2) - HYDRAULIC EQUIPMENT, PLOWS BUILT FROM 1978 THROUGH 1982 | (735) - CASE IH MOLDBOARD PLOW (1/90-12/91) |
| (8-4) - HYDRAULIC EQUIPMENT, PLOWS BUILT AFTER 1982 | (735) - CASE IH MOLDBOARD PLOW (1/90-12/91) |
| (9-22) - ROLLING COLTER, HIGH LIFT SPRING CUSHION TYPE WITH BENT STANDARD | (735) - CASE IH MOLDBOARD PLOW (1/90-12/91) |
| (9-24) - ROLLING COLTER, HIGH LIFT SPRING CUSHION TYPE WITH 20 INCH DISC | (735) - CASE IH MOLDBOARD PLOW (1/90-12/91) |
| (9-26) - ROLLING COLTER, HIGH LIFT SPRING CUSHION TYPE WITH 22 INCH DISC | (735) - CASE IH MOLDBOARD PLOW (1/90-12/91) |
| (9-12) - ROLLING COLTER, HIGH LIFT SPRING CUSHION TYPE | (770) - CASE IH MOLDBOARD PLOW (1/91-12/92) |
| (B-05) - HAY PICK-UP UNIT - AUGER AND CONNECTIONS | (720) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/88) |
| (A-24) - REMOTE CRANK-TYPE SPOUT CONTROL ATTACHMENT | (7) - INTERNATIONAL HARVESTER FLAIL CHOPPER (1/63-12/69) |
| (A-24) - REMOTE CRANK-TYPE SPOUT CONTROL ATTACHMENT | (8) - INTERNATIONAL HARVESTER FLAIL CHOPPER (1/64-12/78) |
| (B-04) - CONVEYOR DRIVE EQUIPMENT AND BEATER DRIVE SHAFT | (61) - INTERNATIONAL HARVESTER POWER FORAGE FEEDER W/INCLINED CONVEYOR (1/59-12/69) |
| (B-06) - CROSS CONVEYOR | (61) - INTERNATIONAL HARVESTER POWER FORAGE FEEDER W/INCLINED CONVEYOR (1/59-12/69) |
| (B-05) - HAY PICK-UP UNIT - AUGER AND CONNECTIONS | (830) - INTERNATIONAL HARVESTER FORAGE HARVESTER (1/76-12/80) |
| (B-07) - BELT PULLEY, IDLER AND DRIVE | (40) - INTERNATIONAL HARVESTER SHREDDER (1/68-12/72) |
| (G-15) - FRONT AXLE AND BALANCE SPRINGS | (816) - INTERNATIONAL HARVESTER 9FT MOWER CONDITIONER (1/65-12/69) |
| (A-19) - CHASSIS ASSEMBLY, FRONT END | (VARIOUS) - WAGONS (1/36-12/98) |
| (B-006[1]) - STEERING ARM TIE BAR AND BRACKET | (VARIOUS) - WAGONS (1/36-12/98) |
| (B-009[2]) - STEEL TONGUE 16569W SPECIAL, 1937 TO 1952 | (VARIOUS) - WAGONS (1/36-12/98) |
| (B-114) - TRAILER HITCH AND SAFETY CHAIN, BALL & SOCKET TYPE, FOR 95 TRAILERS W/SURGE BREAKS BUILT 1970&SINCE | (VARIOUS) - WAGONS (1/36-12/98) |
| (30) - REEL ASSEMBLY, CONTINUED | (86) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/80-12/89) |
| (44) - GAUGE WHEEL, BASKET HEIGHT | (86) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/80-12/89) |
| (G-09) - REEL ASSEMBLY | (96) - INTERNATIONAL HARVESTER RAKE (1/70-12/89) |
| (G-18[A]) - GAUGE WHEEL | (96) - INTERNATIONAL HARVESTER RAKE (1/70-12/89) |
| (30) - REEL ASSEMBLY, CONTINUED | (96) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/70-12/89) |
| (44) - GAUGE WHEEL, BASKET HEIGHT | (96) - INTERNATIONAL HARVESTER SIDE DELIVERY RAKE (1/70-12/89) |
| (30) - REEL ASSEMBLY, CONTINUED | (97) - INTERNATIONAL HARVESTER RAKE (1/70-12/89) |
| (44) - GAUGE WHEEL, BASKET HEIGHT | (97) - INTERNATIONAL HARVESTER RAKE (1/70-12/89) |
| (26) - WHEELS, CASTERS AND WHEEL LOCKS | (742) - CASE IH DUPLEX PULL-TYPE WINDROWER (8/97-12/97) |
| (52) - MAIN DRIVES, REAR UNIT | (742) - CASE IH DUPLEX PULL-TYPE WINDROWER (8/97-12/97) |
| (26) - WHEELS, CASTERS AND WHEEL LOCKS | (750) - CASE IH DUPLEX PULL-TYPE WINDROWER (1/86-12/88) |
| (52) - MAIN DRIVES, REAR UNIT | (750) - CASE IH DUPLEX PULL-TYPE WINDROWER (1/86-12/88) |
| (D-12[A]) - FEED CONTROL | (125) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (D-13) - LEVER CONTROL, SPECIAL | (125) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (09-16) - HYDRAULIC ENDGATE | (1500-SERIES) - CASE IH MANURE SPREADERS (1/85-12/97) |
| (09-26) - SLURRY PAN | (1500-SERIES) - CASE IH MANURE SPREADERS (1/85-12/97) |
| (B-06[A]) - CLUTCH THROW-OUT ROD | (101) - MCCORMICK-INTERNATIONAL GROUND DRIVE MANURE SPREADER (1/60-12/74) |
| (B-07) - CONTROL AND DECLUTCH LEVER, REGULAR 1966 AND SINCE | (101) - MCCORMICK-INTERNATIONAL GROUND DRIVE MANURE SPREADER (1/60-12/74) |
| (B-09) - RATCHET WHEEL | (101) - MCCORMICK-INTERNATIONAL GROUND DRIVE MANURE SPREADER (1/60-12/74) |
| (B-10[A]) - FEED CONTROL ROD | (101) - MCCORMICK-INTERNATIONAL GROUND DRIVE MANURE SPREADER (1/60-12/74) |
| (B-16) - DECLUTCH LEVER, REGULAR 1966 AND SINCE | (101) - MCCORMICK-INTERNATIONAL GROUND DRIVE MANURE SPREADER (1/60-12/74) |
| (C-14) - FEED CONTROL UNIT | (102) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/60-12/66) |
| (C-15[A]) - RATCHET WHEEL | (102) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/60-12/66) |
| (C-15) - LEVER CONTROL, SPECIAL | (102) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/60-12/66) |
| (H-21) - WIDESPREAD BEATER CLUTCH | (130) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (H-25) - FEED CONTROL ROPE UNIT | (130) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (E-14[A]) - CLUTCH THROW-OUT AND FEED CONTROL | (150) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (E-14) - LEVER CONTROL | (150) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/61-12/66) |
| (J-22) - WIDESPREAD BEATER CLUTCH | (155) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (J-23) - FEED CONTROL ROPE UNIT | (155) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/64-12/72) |
| (G-12[A]) - FEED CONTROL | (160) - MCCORMICK-INTERNATIONAL POWER DRIVE MANURE SPREADER (1/63-12/72) |
| (L-38) - BUNK FEED MAIN DRIVE, (1970 AND SINCE) | (275) - INTERNATIONAL HARVESTER POWER DRIVE MANURE SPREADER (1/65-12/73) |
| (A-07[A]) - FEED CONTROL ROD | (75) - MCCORMICK-INTERNATIONAL GROUND DRIVE MANURE SPREADER (1/60-12/72) |
| (A-08[A]) - CLUTCH THROW-OUT ROD | (75) - MCCORMICK-INTERNATIONAL GROUND DRIVE MANURE SPREADER (1/60-12/72) |
| (A-08) - CONTROL AND DECLUTCH LEVER, SPECIAL PRIOR TO 1966 | (75) - MCCORMICK-INTERNATIONAL GROUND DRIVE MANURE SPREADER (1/60-12/72) |
| (A-09) - RATCHET WHEEL | (75) - MCCORMICK-INTERNATIONAL GROUND DRIVE MANURE SPREADER (1/60-12/72) |
| (A-14) - DECLUTCH LEVER, REGULAR 1966 AND SINCE | (75) - MCCORMICK-INTERNATIONAL GROUND DRIVE MANURE SPREADER (1/60-12/72) |
| (2-16) - IDLER ASSEMBLY, DRIVE CHAIN, LEFT | (8480) - CASE IH FIXED CHAMBER ROUND BALER (1/90-12/00) |
| (7-08) - GAUGE WHEEL ASSEMBLY | (8480) - CASE IH FIXED CHAMBER ROUND BALER (1/90-12/00) |
| (11.10[1]) - WHEELS & TIRES WIDE PICKUP,15 X 6.00 - 6, USED ON ALL NORTH AMERICA BALERS & EUROPE ROTOR BALERS, P.I.N. Y9N043084 & PRIOR | (RB454) - CASE IH ROUND BALER (7/07-1/14) |
| (11.13) - WHEEL & TIRE, PICKUP, 4 PLY, 16.5 X 6.5-8 | (RB454) - CASE IH ROUND BALER (7/07-1/14) |
| (11.40) - WHEELS, HUB & SPINDLE, STANDARD DUTY | (RB454) - CASE IH ROUND BALER (7/07-1/14) |
| (44.511.03) - WHEELS, HUB & SPINDLE, STANDARD DUTY | (RB455A) - UTILITY CASE IH ROUND BALER (1/10-12/14) |
| (11.10[1]) - WHEELS & TIRES WIDE PICKUP,15 X 6.00 - 6, USED ON ALL NORTH AMERICA BALERS & EUROPE ROTOR BALERS, P.I.N. Y9N043084 & PRIOR | (RB464) - CASE IH ROUND BALER (7/07-1/14) |
| (11.13) - WHEEL & TIRE, PICKUP, 4 PLY, 16.5 X 6.5-8 | (RB464) - CASE IH ROUND BALER (7/07-1/14) |
| (11.40) - WHEELS, HUB & SPINDLE, STANDARD DUTY | (RB464) - CASE IH ROUND BALER (7/07-1/14) |
| (18.60) - DIA KIT, CROP SAVER WHEEL | (RB464) - CASE IH ROUND BALER (7/07-1/14) |
| (11.15) - WHEELS & TIRES, STANDARD PICKUP, 4 PLY, 16.5 X 6.5 - 8 | (RB554) - CASE IH ROUND BALER (7/07-1/14) |
| (11.40) - WHEELS, HUB & SPINDLE, STANDARD DUTY | (RB554) - CASE IH ROUND BALER (7/07-1/14) |
| (15.13) - TWINE KNIFE | (RB554) - CASE IH ROUND BALER (7/07-1/14) |
| (18.60) - DIA KIT, CROP SAVER WHEEL | (RB554) - CASE IH ROUND BALER (7/07-1/14) |
| (11.10[1]) - WHEELS & TIRES WIDE PICKUP,15 X 6.00 - 6, USED ON ALL NORTH AMERICA BALERS & EUROPE ROTOR BALERS, P.I.N. Y9N043084 & PRIOR | (RB564) - CASE IH ROUND BALER (7/07-1/14) |
| (11.15) - WHEELS & TIRES, STANDARD PICKUP, 4 PLY, 16.5 X 6.5 - 8 | (RB564) - CASE IH ROUND BALER (7/07-1/14) |
| (11.40) - WHEELS, HUB & SPINDLE, STANDARD DUTY | (RB564) - CASE IH ROUND BALER (7/07-1/14) |
| (15.13) - TWINE KNIFE | (RB564) - CASE IH ROUND BALER (7/07-1/14) |
| (18.60) - DIA KIT, CROP SAVER WHEEL | (RB564) - CASE IH ROUND BALER (7/07-1/14) |
| (010) - HYDRAULICS | (RBX441) - CASE IH ROUND BALER (11/01-8/02) |
| (008) - PICKUP WHEEL, RH, STANDARD | (RBX441) - CASE IH ROUND BALER (11/01-8/02) |
| (009) - PICKUP WHEEL, LH, OPTIONAL | (RBX441) - CASE IH ROUND BALER (11/01-8/02) |
| (11.12) - WHEELS & TIRES, STANDARD PICKUP, 4.80/4.00 X 8 | (RBX442) - CASE IH ROUND BALER (9/02-7/05) |
| (11.12) - WHEELS & TIRES, STANDARD PICKUP, 4.80/4.00 X 8 | (RBX443) - CASE IH ROUND BALER (9/05-12/06) |
| (032) - HUB & SPINDLE | (RBX451) - CASE IH ROUND BALER (12/01-10/02) |
| (042) - WIDE PICKUP, LIFT CRANK | (RBX451) - CASE IH ROUND BALER (12/01-10/02) |
| (052) - WIDE PICKUP, TIRES & WHEELS | (RBX451) - CASE IH ROUND BALER (12/01-10/02) |
| (039) - TWINE CUT-OFF | (RBX451) - CASE IH ROUND BALER (12/01-10/02) |
| (11.10) - WHEELS & TIRES, WIDE PICKUP, 16 X 6.5 - 8 | (RBX452) - CASE IH ROUND BALER (11/02-7/05) |
| (11.13) - WHEEL & TIRE, PICKUP, 4 PLY, 16 X 6.5 - 8 | (RBX452) - CASE IH ROUND BALER (11/02-7/05) |
| (11.40) - WHEELS, HUB & SPINDLE, STANDARD DUTY | (RBX452) - CASE IH ROUND BALER (11/02-7/05) |
| (11.10) - WHEELS & TIRES, WIDE PICKUP , 15 X 6.00 - 6 | (RBX453) - CASE IH ROUND BALER (9/05-12/06) |
| (11.13) - WHEEL & TIRE, PICKUP, 4 PLY, 16.5 X 6.5-8 | (RBX453) - CASE IH ROUND BALER (9/05-12/06) |
| (11.40) - WHEELS, HUB & SPINDLE, STANDARD DUTY | (RBX453) - CASE IH ROUND BALER (9/05-12/06) |
| (047) - HUB & SPINDLE | (RBX461) - CASE IH ROUND BALER (12/01-12/02) |
| (076) - WIDE PICKUP, LIFT CRANK | (RBX461) - CASE IH ROUND BALER (12/01-12/02) |
| (080) - WIDE PICKUP, TIRES & WHEELS | (RBX461) - CASE IH ROUND BALER (12/01-12/02) |
| (11.10) - WHEELS & TIRES, WIDE PICKUP, 16 X 6.5 - 8 | (RBX462) - CASE IH ROUND BALER (1/03-7/05) |
| (11.13) - WHEEL & TIRE, PICKUP, 4 PLY, 16 X 6.5 - 8 | (RBX462) - CASE IH ROUND BALER (1/03-7/05) |
| (11.40) - WHEELS, HUB & SPINDLE, STANDARD DUTY | (RBX462) - CASE IH ROUND BALER (1/03-7/05) |
| (11.10) - WHEELS & TIRES, WIDE PICKUP , 15 X 6.00 - 6 | (RBX463) - CASE IH ROUND BALER (9/05-12/06) |
| (11.13) - WHEEL & TIRE, PICKUP, 4 PLY, 16.5 X 6.5-8 | (RBX463) - CASE IH ROUND BALER (9/05-12/06) |
| (11.40) - WHEELS, HUB & SPINDLE, STANDARD DUTY | (RBX463) - CASE IH ROUND BALER (9/05-12/06) |
| (11.15) - WHEELS & TIRES, STANDARD PICKUP, 4 PLY, 16.5 X 6.5 - 8 | (RBX552) - CASE IH ROUND BALER (2/03-7/05) |
| (11.40) - WHEELS, HUB & SPINDLE, STANDARD DUTY | (RBX552) - CASE IH ROUND BALER (2/03-7/05) |
| (15.13) - TWINE KNIFE | (RBX552) - CASE IH ROUND BALER (2/03-7/05) |
| (18.60) - CROP SAVER WHEEL KIT | (RBX552) - CASE IH ROUND BALER (2/03-7/05) |
| (11.15) - WHEELS & TIRES, STANDARD PICKUP, 4 PLY, 15 X 6 - 6 | (RBX553) - CASE IH ROUND BALER (9/05-12/06) |
| (11.40) - WHEELS, HUB & SPINDLE, STANDARD DUTY | (RBX553) - CASE IH ROUND BALER (9/05-12/06) |
| (15.13) - TWINE KNIFE | (RBX553) - CASE IH ROUND BALER (9/05-12/06) |
| (18.60) - CROP SAVER WHEEL KIT | (RBX553) - CASE IH ROUND BALER (9/05-12/06) |
| (001) - MAIN FRAME | (RBX561) - CASE IH ROUND BALER (12/01-8/02) |
| (008) - PICKUP TIRE & WHEEL | (RBX561) - CASE IH ROUND BALER (12/01-8/02) |
| (009) - PICKUP LIFT, MANUAL | (RBX561) - CASE IH ROUND BALER (12/01-8/02) |
| (026) - TWINE CUT-OFF | (RBX561) - CASE IH ROUND BALER (12/01-8/02) |
| (043) - CROP SAVER WHEEL KIT | (RBX561) - CASE IH ROUND BALER (12/01-8/02) |
| (11.10) - WHEELS & TIRES, WIDE PICKUP, 16 X 6.5 - 8 | (RBX562) - CASE IH ROUND BALER (9/02-7/05) |
| (11.15) - WHEELS & TIRES, STANDARD PICKUP, 4 PLY, 16.5 X 6.5 - 8 | (RBX562) - CASE IH ROUND BALER (9/02-7/05) |
| (11.40) - WHEELS, HUB & SPINDLE, STANDARD DUTY | (RBX562) - CASE IH ROUND BALER (9/02-7/05) |
| (15.13) - TWINE KNIFE | (RBX562) - CASE IH ROUND BALER (9/02-7/05) |
| (18.60) - CROP SAVER WHEEL KIT | (RBX562) - CASE IH ROUND BALER (9/02-7/05) |
| (11.10) - WHEELS & TIRES, WIDE PICKUP , 15 X 6.00 - 6 | (RBX563) - CASE IH ROUND BALER (9/05-12/06) |
| (11.15) - WHEELS & TIRES, STANDARD PICKUP, 4 PLY, 15 X 6 - 6 | (RBX563) - CASE IH ROUND BALER (9/05-12/06) |
| (11.40) - WHEELS, HUB & SPINDLE, STANDARD DUTY | (RBX563) - CASE IH ROUND BALER (9/05-12/06) |
| (15.13) - TWINE KNIFE | (RBX563) - CASE IH ROUND BALER (9/05-12/06) |
| (18.60) - CROP SAVER WHEEL KIT | (RBX563) - CASE IH ROUND BALER (9/05-12/06) |
| (11.12) - WHEELS & TIRES, STANDARD PICKUP, 4.80/4.00 X 8 | (RB444) - CASE IH ROUND BALER (7/07-1/14) |
| (6-02) - KNOTTER, TWISTER, NEEDLE MOUNTING & CONTROL ASSEMBLY | (8545) - CASE IH RECTANGULAR BALER (1/89-12/99) |
| (06-04) - KNOTTER ASSEMBLY (RASSPE) | (8555) - CASE IH RECTANGULAR BALER (1/90-12/99) |
| (10-002) - HITCH, LINKAGE AND WING LATCH ASSEMBLIES | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (NORTH AMERICA) (1/95-12/00) |
| (10-016) - FRAME AND PADDLE ASSEMBLY (REAR) | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (NORTH AMERICA) (1/95-12/00) |
| (10-018) - FRAME SHIELD AND PADDLE ASSEMBLY (REAR) | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (NORTH AMERICA) (1/95-12/00) |
| (9-02) - HITCH | (5420) - CASE IH RECTANGULAR BALER (1/85-12/87) |
| (9-12) - PLUNGER, CONTINUED | (5420) - CASE IH RECTANGULAR BALER (1/85-12/87) |
| (9-32) - DRY FERTILIZER HOPPER AND MOUNTING, ONE OUTLET HOPPER, USED WITH 8 ROW COULTER FRAME | (6800) - CASE IH CART (2/97-12/02) |
| (9-34) - DRY FERTILIZER HOPPER AUGERS, USED WITH 6 ROW AND 8 ROW COULTER FRAMES | (6800) - CASE IH CART (2/97-12/02) |
| (9-100) - PRESS WHEEL GANG REAR SUSPENSION | (7200) - CASE IH GRAIN DRILL (1/88-12/96) |
| (9-006) - SPINDLES, HUBS AND BEARINGS, 45 FOOT WIDE DRILL | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (9-008) - SPINDLES, HUBS AND BEARINGS, 33 FOOT WIDE DRILL | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (9-166) - PRESS WHEEL FRAME AND MOUNTING PARTS, USED WITH FRAME SECTIONS 2, 3, 4, AND 5, 45 FOOT WIDE DRILL | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (9-168) - PRESS WHEEL FRAME AND MOUNTING PARTS, USED WITH FRAME SECTIONS 1, 2, 3, AND 4, 33 FOOT WIDE DRILL | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (9-170) - PRESS WHEEL FRAME AND MOUNTING PARTS, USED WITH FRAME SECTIONS ONE AND SIX, 45 FOOT WIDE DRILL | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (9-44) - SWING ARM ASSEMBLY, CLYMER COULTER | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (07-36) - SEED HANDLING, PLANTER UNIT, PLATE, UNIT F, G, K-N P, Q, T, AA & AB, UNITS A-E, H, J, S, U, V-Z | (800) - CASE IH PLANTER (1/77-12/86) |
| (9-272) - DRY FERTILIZER HOPPER AUGERS, CYCLO AIR AND PLATE TRAILING, ALL ROW SIZES | (900) - CASE IH PLANTER (1/87-12/95) |
| (9F-50) - DRY FERTILIZER HOPPER AUGERS, 12 AND 16 ROW NARROW, FRONT FOLD | (950) - CASE IH TRAILING PLANTER (7/89-12/95) |
| (9F-52) - DRY FERTILIZER HOPPER AUGERS, ALL RIGID | (950) - CASE IH TRAILING PLANTER (7/89-12/95) |
| (9F-54) - DRY FERTILIZER HOPPER AUGERS, ALL VERTICAL FOLD | (950) - CASE IH TRAILING PLANTER (7/89-12/95) |
| (9F-072[1]) - USED WITH SINGLE OUTLET HOPPER, 12 ROW | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9F-072[2]) - USED WITH DOUBLE OUTLET HOPPER, 12 AND 16 ROW | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9F-072[3]) - USED WITH TRIPLE OUTLET HOPPER, 12 AND 16 ROW | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9F-072) - DRY FERTILIZER HOPPER AUGERS, 12 AND 16 ROW NARROW - FRONT | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9F-074) - DRY FERTILIZER HOPPER AUGERS, 12 ROW WIDE - FRONT FOLD | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9F-076[1]) - USED WITH DOUBLE OUTLET HOPPER, 4 ROW WIDE, 8 ROW NARROW | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9F-076[2]) - USED WITH DOUBLE OUTLET HOPPER - SPECIAL 4 ROW NARROW AND 8 ROW NARROW | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9F-076[3]) - USED WITH TRIPLE OUTLET HOPPER, 6 ROW NARROW AND 6 ROW WIDE | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9F-076) - DRY FERTILIZER HOPPER AUGERS, ALL RIGID PLANTERS, USED WITH | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9F-078[1]) - USED WITH DOUBLE OUTLET HOPPER, 8 ROW WIDE | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9F-078[2]) - USED WITH TRIPLE OUTLET HOPPER, 12 ROW NARROW | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9F-078) - DRY FERTILIZER HOPPER AUGERS, ALL VERTICAL FOLD PLANTERS | (955) - CASE IH TRAILING PLANTER (10/95-12/99) |
| (9-32) - DRY FERTILIZER HOPPER AND MOUNTING, ONE OUTLET HOPPER, USED WITH 8 ROW COULTER FRAME | (6100) - CASE IH CART (2/97-12/02) |
| (9-34) - DRY FERTILIZER HOPPER AUGERS, USED WITH 6 ROW AND 8 ROW COULTER FRAMES | (6100) - CASE IH CART (2/97-12/02) |
| (9-10) - PEG TOOTH SECTION, HEAVY DUTY | (568) - CASE IH SEED BED CONDITIONER (1/84-12/97) |
| (9-19) - ROLLING BASKET MULCHER | (568) - CASE IH SEED BED CONDITIONER (1/84-12/97) |
| (9-084) - FERTILIZER DRIVE | (310) - CASE IH DISKALL (1/85-12/90) |
| (9-14) - ROLLING COLTER, CUSHION SPRING TYPE - HIGH LIFT | (700) - CASE IH HI-CLEARANCE TRAILING MOLDBOARD PLOW (1/67-12/00) |
| (9-16) - ROLLING COLTER, CUSHION SPRING TYPE - WITH BENT STANDARD | (700) - CASE IH HI-CLEARANCE TRAILING MOLDBOARD PLOW (1/67-12/00) |
| (9-30) - ROLLING COLTER, SPRING CUSHION, DISC TYPE | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (9-32) - ROLLING COLTER, CUSHION TYPE | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (09-09) - ROLLING COULTER, SPRING CUSHION TYPE WITH CAST ARM | (7500) - CASE IH MOLDBOARD PLOW (1/95-12/00) |
| (9-14) - ROLLING COLTER, HEAVY DUTY - HIGH LIFT CUSHION SPRING TYPE | (800) - CASE IH MOLDBOARD PLOW (1/96-12/00) |
| (9-16) - ROLLING COLTER, CUSHION SPRING TYPE WITH BENT STANDARD | (800) - CASE IH MOLDBOARD PLOW (1/96-12/00) |
| (9-17) - ROLLING COLTER, CUSHION SPRING SIDE ARM - 22 INCH BLADE | (800) - CASE IH MOLDBOARD PLOW (1/96-12/00) |
| (5-08) - FEEDROLL ASSEMBLY, UPPER | (8725) - CASE IH PULL-TYPE FORAGE HARVESTER (1/95-12/00) |
| (6-04) - SPOUT CONTROL ASSEMBLY | (8725) - CASE IH PULL-TYPE FORAGE HARVESTER (1/95-12/00) |
| (05.01) - SINGLE AXLE | (FHX300) - CASE IH PULL-TYPE FORAGE HARVESTER (11/01-12/15) |
| (05.02) - TANDEM AXLE | (FHX300) - CASE IH PULL-TYPE FORAGE HARVESTER (11/01-12/15) |
| (08.02) - SHIELDS, DRIVELINE | (FHX300) - CASE IH PULL-TYPE FORAGE HARVESTER (11/01-12/15) |
| (14.03) - CROP PROCESSOR, SHIELDS | (FHX300) - CASE IH PULL-TYPE FORAGE HARVESTER (11/01-12/15) |
| (B-33) - CUTTER BAR UNIT - AUGER | (55) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/65-12/66) |
| (B-44) - PICKUP UNIT - AUGER | (55) - INTERNATIONAL HARVESTER FORAGE HARVESTER W/ROW CROP UNIT (1/65-12/66) |
| (9-24) - AUGER AND DRIVE, 600 BLOWER | (600) - INTERNATIONAL HARVESTER BLOWER (1/82-12/15) |
| (10-65) - HYDRAULICS, AUTOMATIC HEADER CONTROL, S/N 1500 AND BELOW | (1440) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (10-70) - HYDRAULICS, AUTOMATIC HEADER CONTROL, S/N 1500 AND BELOW | (1460) - CASE IH AXIAL-FLOW COMBINE (NORTH AMERICA) (1/77-12/84) |
| (9A-06) - RIGHT SIDE BELT DRIVE, (CON'T) | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (9D-20) - GRAIN ELEVATOR DRIVE | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (9D-30) - TAILINGS ELEVATOR DRIVE | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (9A-02) - BELT DRIVE - FAN JACKSHAFT | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (9A-04) - BELT DRIVE - RIGHT SIDE | (1640) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0034705 & AFTER) (NORTH AMERICA) (1/86-12/92) |
| (9A-02) - BELT DRIVE, FAN JACKSHAFT | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (9A-04) - BELT DRIVE, RIGHT HAND SIDE | (1660) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0038346) (NORTH AMERICA) (1/86-12/89) |
| (9A-02) - BELT DRIVE, FAN JACKSHAFT | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (9A-04) - BELT DRIVE, RIGHT-HAND SIDE | (1660) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0038346 & AFTER) (NORTH AMERICA) (1/86-12/89) |
| (9A-02) - FAN JACKSHAFT BELT DRIVE | (1680) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0045689) (NORTH AMERICA) (1/86-7/89) |
| (9A-04) - RIGHT-HAND SIDE BELT DRIVE | (1680) - CASE IH AXIAL-FLOW COMBINE (PRIOR TO S/N JJC0045689) (NORTH AMERICA) (1/86-7/89) |
| (9A-02) - FAN JACKSHAFT BELT DRIVE | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (9A-04) - RIGHT SIDE BELT DRIVE | (1680) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0045689 & AFTER) (NORTH AMERICA) (8/89-12/92) |
| (070) - RIGHT SIDE BELT DRIVE, EXTENDED LENGTH CLEANING SYSTEM | (1680) - COMBINE SUPPLEMENT (1/86-12/88) |
| (9-102) - BEATER AND SHAKER BELT DRIVE (CONT'D) | (1682) - CASE IH PULL-TYPE AXIAL-FLOW COMBINE (1/87-12/91) |
| (9A-02) - FAN JACKSHAFT BELT DRIVE | (1688) - CASE IH AXIAL-FLOW COMBINE (1/93-12/94) |
| (9A-02) - BELT DRIVE, FAN JACKSHAFT | (2188) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (09A-26) - ROCK TRAP - DRIVE - ASN JJC0174400 | (2344) - CASE IH AXIAL-FLOW COMBINE (1/98-1/02) |
| (09A-26) - ROCK TRAP - DRIVE - ASN JJC0254000 | (2366) - CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04) |
| (09A-01) - BELT DRIVE - JACKSHAFT, FAN | (2377) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001&HAJ300000 (11/04-12/07) |
| (09A-20) - ROCK TRAP DRIVE | (2377) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001&HAJ300000 (11/04-12/07) |
| (09A-01) - BELT DRIVE - JACKSHAFT, FAN | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (09A-26) - ROCK TRAP DRIVE ASN JJC0268800 | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (09A-01) - BELT DRIVE - JACKSHAFT, FAN | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001 & HAJ300000 (1/98-12/07) |
| (09A-20) - ROCK TRAP DRIVE | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BTW HAJ292001 & HAJ300000 (1/98-12/07) |
| (09A-01) - BELT DRIVE - JACKSHAFT, FAN | (2388) - CASE IH AXIAL-FLOW COMBINE (RU) ASN HAJ300001 (10/06-12/07) |
| (09A-20) - ROCK TRAP DRIVE | (2388) - CASE IH AXIAL-FLOW COMBINE (RU) ASN HAJ300001 (10/06-12/07) |
| (66.101.10) - ROCK TRAP DRIVE | (2577) - AXIAL-FLOW COMBINE (NA) ASN HAJ0300001 (1/06-12/07) |
| (66.101.10) - ROCK TRAP DRIVE | (2588) - CASE IH AXIAL-FLOW COMBINE (NA) ASN HAJ300001 (10/06-12/06) |
| (74.101.14) - BELT DRIVE - JACKSHAFT, FAN | (2588) - CASE IH AXIAL-FLOW COMBINE (NA) ASN HAJ300001 (10/06-12/06) |
| (60.110.32) - IDLER ASSEMBLY, ROCK TRAP | (5130) - COMBINE TIER 4 (1/12-1/13) |
| (74.101.14) - BELT DRIVE - JACKSHAFT, FAN | (5130) - COMBINE TIER 4 (1/12-1/13) |
| (60.110.32) - IDLER ASSEMBLY, ROCK TRAP | (6130) - COMBINE TIER 4 (1/12-1/13) |
| (74.101.14) - BELT DRIVE - JACKSHAFT, FAN | (6130) - COMBINE TIER 4 (1/12-1/13) |
| (60.110.32) - IDLER ASSEMBLY, ROCK TRAP | (7130) - COMBINE TIER 4 (1/12-1/13) |
| (74.101.14) - BELT DRIVE - JACKSHAFT, FAN | (7130) - COMBINE TIER 4 (1/12-1/13) |
| (9A-02) - FAN JACKSHAFT BELT DRIVE | (1670) - CASE IH HILLSIDE COMBINE (S/N JJC0080540 & AFTER) (8/90-12/91) |
| (9A-04) - BELT DRIVE, RIGHT HAND SIDE | (1670) - CASE IH HILLSIDE COMBINE (S/N JJC0080540 & AFTER) (8/90-12/91) |
| (098) - HYDRAULIC BRAKE PEDAL, CYLINDER AND TUBES | (403) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/63-12/72) |
| (052) - SEPARATOR SHIELDS, LH, OPTIONAL S/N 805 AND BELOW, STANDARD S/N 806 AND ABOVE | (403) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/63-12/72) |
| (054) - SEPARATOR SHIELDS, RH, OPTIONAL S/N 805 AND BELOW, STANDARD S/N 806 AND ABOVE | (403) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/63-12/72) |
| (096) - CLUTCH PEDAL AND CONNECTIONS | (403) - INTERNATIONAL HARVESTER HILLSIDE COMBINE (1/63-12/72) |
| (203) - HYDRAULIC PROPULSION CONTROL CYLINDER | (303) - INTERNATIONAL HARVESTER COMBINE (BEAN SPECIAL) (1/62-12/68) |
| (056) - SEPARATOR SHIELDS, LH, SERIAL NO. 7278 AND ABOVE | (303) - INTERNATIONAL HARVESTER COMBINE (BEAN SPECIAL) (1/62-12/68) |
| (058) - SEPARATOR SHIELDS, RH, SERIAL NO. 7278 AND ABOVE | (303) - INTERNATIONAL HARVESTER COMBINE (BEAN SPECIAL) (1/62-12/68) |
| (F-28) - HYDRAULICS SYSTEM, PROPULSION CONTROL CYLINDER, NOT HYDROSTATIC GROUND DRIVE | (315) - INTERNATIONAL HARVESTER COMBINE (1/67-12/70) |
| (205[1]) - HYDRAULIC PROPULSION CONTROL CYLINDER | (503) - INTERNATIONAL HARVESTER COMBINE (1/62-12/69) |
| (067) - SEPARATOR SHIELDS LH, SERIAL NO 2431 AND ABOVE | (503) - INTERNATIONAL HARVESTER COMBINE (1/62-12/69) |
| (070) - SEPARATOR SHIELDS RH, SERIAL NO 2431 AND ABOVE | (503) - INTERNATIONAL HARVESTER COMBINE (1/62-12/69) |
| (10-13) - HYDRAULICS, AUTOMATIC HEADER CONTROL, SERIAL NO. 8001 AND ABOVE | (615) - INTERNATIONAL HARVESTER COMBINE (1/71-12/75) |
| (10-14) - HYDRAULICS, AUTOMATIC HEADER CONTROL, SERIAL NO. 8001 AND ABOVE | (715) - INTERNATIONAL HARVESTER COMBINE (PRIOR TO S/N 23001) (1/71-12/79) |
| (10-12) - HYDRAULICS, AUTOMATIC HEADER CONTROL | (715) - INTERNATIONAL HARVESTER COMBINE (S/N 23001 & AFTER) (1/71-12/79) |
| (10-12) - HYDRAULICS, AUTOMATIC HEADER CONTROL | (815) - INTERNATIONAL HARVESTER COMBINE (S/N 8001 & AFTER) (1/74-12/78) |
| (10-14) - HYDRAULICS, AUTOMATIC HEADER CONTROL | (915) - INTERNATIONAL HARVESTER COMBINE (S/N 8001 & AFTER) (1/78-12/78) |
| (189[1]) - HYDRAULIC PROPULSION CONTROL CYLINDER, NOT HYDROSTATIC GROUND DRIVE | (403) - INTERNATIONAL HARVESTER COMBINE (1/62-12/71) |
| (054) - SEPARATOR SHIELDS, LH, SERIAL NO. 7224 AND ABOVE | (403) - INTERNATIONAL HARVESTER COMBINE (1/62-12/71) |
| (056) - SEPARATOR SHIELDS, RH, SERIAL NO. 7224 AND ABOVE | (403) - INTERNATIONAL HARVESTER COMBINE (1/62-12/71) |
| (22) - REEL, REEL SUPPORTS, REEL DRIVE AND REEL GUARDS | (82) - INTERNATIONAL PULL-TYPE COMBINE (1/66-12/74) |
| (32) - STRAW SPREADER ATTACHMENT | (82) - INTERNATIONAL PULL-TYPE COMBINE (1/66-12/74) |
| (6-04) - FOOT-N-INCH PEDAL | (1400) - INTERNATIONAL HARVESTER COTTON HARVESTER (1/79-12/86) |
| (8-16) - UNIT LIFT CONTROLS | (1400) - INTERNATIONAL HARVESTER COTTON HARVESTER (1/79-12/86) |
| (9B-02) - FAN DRIVE AND CONTROLS | (1400) - INTERNATIONAL HARVESTER COTTON HARVESTER (1/79-12/86) |
| (7-02) - MASTER BRAKE CONTROLS | (1400) - INTERNATIONAL HARVESTER COTTON HARVESTER (1/79-12/86) |
| (114) - PLANT LIFTER | (414) - INTERNATIONAL HARVESTER COTTON PICKER (1/60-12/77) |
| (017) - PLANT LIFTER | (414) - INTERNATIONAL HARVESTER COTTON PICKER (1/60-12/77) |
| (114) - PLANT LIFTER | (420) - INTERNATIONAL HARVESTER COTTON PICKER (1/60-12/77) |
| (017) - PLANT LIFTER | (420) - INTERNATIONAL HARVESTER COTTON PICKER (1/60-12/77) |
| (8-08) - HYDRAULICS, FIXED OPENING, 21, 25 AND 30 FOOT HEADERS | (6000) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/88) |
| (9-24) - KNIFE AND DRIVE GROUP, 36 FOOT HEADER | (6000) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/88) |
| (9-30) - REEL DRIVE | (6000) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/88) |
| (9-46) - GAUGE WHEELS, 21, 25 AND 30 FOOT HEADERS | (6000) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/88) |
| (9-48) - GAUGE WHEELS, 36 FOOT HEADER | (6000) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/88) |
| (8-08) - HYDRAULICS, FIXED OPENING, 21, 25 AND 30 FOOT HEADERS | (6500) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/90) |
| (9-24) - KNIFE AND DRIVE GROUP, 36 FOOT HEADER | (6500) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/90) |
| (9-30) - REEL DRIVE | (6500) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/90) |
| (9-46) - GAUGE WHEELS, 21, 25 AND 30 FOOT HEADERS | (6500) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/90) |
| (9-48) - GAUGE WHEELS, 36 FOOT HEADER | (6500) - CASE IH WINDROWER HEADER - DOUBLE SWATH DRAPER (1/84-12/90) |
| (C-12) - GRAIN HEADER, HART CARTER FLOATING CUTTER BAR, FLOATING PARTS, S/N 19000 AND BELOW | (810) - GRAIN HEADER (S/N 501 & AFTER) (1/71-12/88) |
| (C-15) - GRAIN HEADER, HART CARTER FLOATING CUTTER BAR, FLOATING PARTS | (810) - GRAIN HEADER (S/N 501 & AFTER) (1/71-12/88) |
| (C-18) - GRAIN HEADER, HART CARTER FLOATING CUTTER BAR FLOATING PARTS FOR HEADERS W/S/N 26001 & AFT. | (810) - GRAIN HEADER (S/N 501 & AFTER) (1/71-12/88) |
| (C-32) - GRAIN HEADER, AUTOMATIC HEADER CONTROL, HEADER PARTS | (810) - GRAIN HEADER (S/N 501 & AFTER) (1/71-12/88) |
| (102) - SNAPPING ROLL ADJUSTMENT | (2-PR) - INTERNATIONAL HARVESTER CORN PICKER (1/53-12/74) |
| (078) - WAGON ELEVATOR HOPPER AND BAIL RODS AND SUPPORTS | (2-PR) - INTERNATIONAL HARVESTER CORN PICKER (1/53-12/74) |
| (098) - MANUAL LIFT ATTACHMENT, REGULARLY SUPPLIED WITH ALL MACHINES UNLESS OTHERWISE ORDERED | (2-PR) - INTERNATIONAL HARVESTER CORN PICKER (1/53-12/74) |
| (8-02) - 721, 725, AND 730 WINDROWER HYDRAULIC CIRCUIT, PRIOR TO P.I.N. 516 | (721) - CASE IH PULL-TYPE WINDROWER (1/90-12/99) |
| (8-08) - 721, 725, AND 730 WINDROWER HYDRAULIC CIRCUIT, P.I.N. 516 AND AFTER | (721) - CASE IH PULL-TYPE WINDROWER (1/90-12/99) |
| (9-06) - WHEELS, CASTERS AND WHEEL LOCKS | (721) - CASE IH PULL-TYPE WINDROWER (1/90-12/99) |
| (9-10) - HITCH GROUP | (721) - CASE IH PULL-TYPE WINDROWER (1/90-12/99) |
| (8-02) - 721, 725, AND 730 WINDROWER HYDRAULIC CIRCUIT, PRIOR TO P.I.N. 516 | (725) - CASE IH PULL-TYPE WINDROWER (1/86-12/90) |
| (8-08) - 721, 725, AND 730 WINDROWER HYDRAULIC CIRCUIT, P.I.N. 516 AND AFTER | (725) - CASE IH PULL-TYPE WINDROWER (1/86-12/90) |
| (9-06) - WHEELS, CASTERS AND WHEEL LOCKS | (725) - CASE IH PULL-TYPE WINDROWER (1/86-12/90) |
| (9-10) - HITCH GROUP | (725) - CASE IH PULL-TYPE WINDROWER (1/86-12/90) |
| (8-02) - 721, 725, AND 730 WINDROWER HYDRAULIC CIRCUIT, PRIOR TO P.I.N. 516 | (730) - CASE IH PULL-TYPE WINDROWER (1/84-12/90) |
| (8-08) - 721, 725, AND 730 WINDROWER HYDRAULIC CIRCUIT, P.I.N. 516 AND AFTER | (730) - CASE IH PULL-TYPE WINDROWER (1/84-12/90) |
| (9-06) - WHEELS, CASTERS AND WHEEL LOCKS | (730) - CASE IH PULL-TYPE WINDROWER (1/84-12/90) |
| (9-10) - HITCH GROUP | (730) - CASE IH PULL-TYPE WINDROWER (1/84-12/90) |
| (9-06) - WHEELS, CASTERS AND WHEEL LOCKS | (736) - CASE IH PULL-TYPE WINDROWER (1/87-12/90) |
| (9-10) - HITCH GROUP | (736) - CASE IH PULL-TYPE WINDROWER (1/87-12/90) |
| (9-14) - FRONT HITCH AND STABILIZER ASSEMBLY, 736 WINDROWER ONLY | (736) - CASE IH PULL-TYPE WINDROWER (1/87-12/90) |
| (12.03) - DRAWBAR HITCH, JACK, & TOOL BOX | (DC132) - PULL-TYPE MOWER CONDITIONER - ROLLS (9/08-12/14) |
| (39.100.03) - TRAIL FRAME, CENTER | (DCX101) - DISC MOWER CONDITIONER (10/01-7/08) |
| (58.102.02) - HEADER DRIVE | (DCX101) - DISC MOWER CONDITIONER (10/01-7/08) |
| (12.03) - DRAWBAR, SWIVEL HITCH, JACK, & TOOL BOX | (DCX131) - PIVOT TONGUE DISC MOWER CONDITIONER (8/01-10/08) |
| (12.06) - 2 POINT SWIVEL HITCH | (DCX131) - PIVOT TONGUE DISC MOWER CONDITIONER (8/01-10/08) |
| (14.02) - HEADER DRIVE, RIGHT SIDE | (DCX131) - PIVOT TONGUE DISC MOWER CONDITIONER (8/01-10/08) |
| (12.03) - DRAWBAR, SWIVEL HITCH, JACK, & TOOL BOX | (DCX131F) - PIVOT TONGUE DISC MOWER CONDITIONER (9/07-10/08) |
| (12.06) - 2 POINT SWIVEL HITCH | (DCX131F) - PIVOT TONGUE DISC MOWER CONDITIONER (9/07-10/08) |
| (12.03) - DRAWBAR HITCH, JACK, & TOOL BOX | (DCX161) - PIVOT TONGUE DISC MOWER CONDITIONER (9/01-4/08) |
| (12.04) - 2 POINT HITCH | (DCX161) - PIVOT TONGUE DISC MOWER CONDITIONER (9/01-4/08) |
| (15.03) - CONDITIONER DRIVE | (DCX161) - PIVOT TONGUE DISC MOWER CONDITIONER (9/01-4/08) |
| (11.01) - SPINDLE | (DCX91) - DISC MOWER CONDITIONER (2/05-12/06) |
| (12.04) - TRAIL FRAME, CENTER | (DC101F) - 8 DISC FLAIL MOWER CONDITIONER (12/01-12/08) |
| (12.03) - DRAWBAR, SWIVEL HITCH, JACK, & TOOL BOX | (DC132F) - PULL-TYPE MOWER CONDITIONER - FLAILS (9/08-12/14) |
| (11.01) - HUB, SPINDLE, TIRES & WHEELS | (SCX100) - PIVOT TONGUE SICKLE MOWER CONDITIONER (9/01-9/08) |
| (7-08) - HEADER FLOTATION ASSEMBLY | (8320) - CASE IH MOWER CONDITIONER (1/88-12/01) |
| (7-08) - HEADER FLOTATION ASSEMBLY | (8330) - CASE IH MOWER CONDITIONER (1/88-12/01) |
| (A-4) - CHASSIS, RADIATOR AND SHEET METAL, CHASSIS PLATFORM LIFT AND FLOAT | (225) - INTERNATIONAL HARVESTER HAY SWATHER (1/69-12/75) |
| (20.11) - WHEELS, MAIN & SPINDLE | (HTX101) - MOWER CONDITIONER TRANSPORTER (9/01-1/05) |
| (05-012) - STEERING ASSEMBLY | (8840) - CASE IH SELF-PROPELLED WINDROWER TRACTOR (1/88-12/99) |
| (05-12) - STEERING ASSEMBLY | (8850) - CASE IH SELF-PROPELLED ROTARY WINDROWER TRACTOR (1/88-12/99) |
| (F-008) - HAY CONDITIONER, HAY CONDITIONER LIFT MECHANISM | (201) - INTERNATIONAL HARVESTER SELF-PROPELLED WINDROWER (1/61-12/66) |
| (5-2) - STEERING AND GROUND SPEED | (6000) - CASE IH SELF-PROPELLED WINDROWER (1/83-12/88) |
| (7-02) - PARK BRAKE GROUP | (6000) - CASE IH SELF-PROPELLED WINDROWER (1/83-12/88) |
| (9-12) - WALKING BEAM AND CASTERS | (6000) - CASE IH SELF-PROPELLED WINDROWER (1/83-12/88) |
| (5-2) - STEERING AND GROUND SPEED | (6500) - CASE IH SELF-PROPELLED WINDROWER (1/83-12/88) |
| (7-02) - PARK BRAKE GROUP | (6500) - CASE IH SELF-PROPELLED WINDROWER (1/83-12/88) |
| (9-12) - WALKING BEAM AND CASTERS | (6500) - CASE IH SELF-PROPELLED WINDROWER (1/83-12/88) |
| (005) - BELT DRIVE | (RDX161) - DISC HEADER (10/01-10/07) |
| (20.14.07[01]) - BELT DRIVE | (RDX181) - DISC HEADER (1/04-11/08) |
| (B-44) - BUNK FEED PIVOT SHAFT | (570) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (B-44) - BUNK FEED PIVOT SHAFT | (580) - INTERNATIONAL HARVESTER TRUCK MOUNTED MANURE SPREADER (1/73-12/77) |
| (09-45I) - CRUMBER BOOM AND ATTACHMENTS | (90XT) - CASE SKID STEER LOADER - ASN JAF0320050 (NA) JAF0274262 (EU) (1/01-12/05) |
| (09-45I) - CRUMBER BOOM AND ATTACHMENTS | (95XT) - CASE SKID STEER LOADER - ASN JAF0311357 (NA) JAF0274360 (EU) (7/01-12/05) |
| (10-002) - HITCH, LINKAGE AND WING LATCH ASSEMBLIES | (8576) - CASE IH BALER AND ACCUMULATOR (1/98-12/00) |
| (10-016) - FRAME AND PADDLE ASSEMBLY (REAR) | (8576) - CASE IH BALER AND ACCUMULATOR (1/98-12/00) |
| (10-018) - FRAME SHIELD AND PADDLE ASSEMBLY (REAR) | (8576) - CASE IH BALER AND ACCUMULATOR (1/98-12/00) |
| (10-08) - HITCH AND BALE SUPPORT ASSEMBLIES | (8581) - CASE IH BALE ACCUMULATOR (1/88-12/98) |
| (10-10) - HITCH AND BALE SUPPORT ASSEMBLIES, 8582 | (8581) - CASE IH BALE ACCUMULATOR (1/88-12/98) |
| (H-14) - CONTROLS, AUXILIARY VALVE HANDLE AND CONNECTIONS | (4156) - INTERNATIONAL 4WD DIESEL TRACTOR (1/69-12/69) |
| (K-03) - DRAWBAR AND HITCHES, HYDRAULIC DRAWBAR | (4156) - INTERNATIONAL 4WD DIESEL TRACTOR (1/69-12/69) |
| (F-13) - HYDRAULIC SYSTEM, HYDRAULIC AUXILIARY VALVE, CONNECTIONS AND HANDLE | (4156) - INTERNATIONAL 4WD DIESEL TRACTOR (1/69-12/69) |
| (10-08) - HYDRAULICS, HYDRAULIC CONTROL VALVE, TUBES AND SELF-SEALING COUPLING | (4166) - INTERNATIONAL 4WD DIESEL TRACTOR (1/72-12/72) |
| (10-18) - HYDRAULICS, HYDRAULIC AUXILIARY VALVE, CONNECTIONS AND HANDLE | (4166) - INTERNATIONAL 4WD DIESEL TRACTOR (1/72-12/72) |
| (09-03) - FRAME, HYDRAULIC DRAWBAR | (4166) - INTERNATIONAL 4WD DIESEL TRACTOR (1/72-12/72) |
| (10-08) - HYDRAULICS, HYDRAULIC CONTROL VALVE, TUBES AND SELF-SEALING COUPLING | (4186) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/79) |
| (10-18) - HYDRAULICS, HYDRAULIC AUXILIARY VALVE, CONNECTIONS AND HANDLE | (4186) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/79) |
| (09-03) - FRAME, HYDRAULIC DRAWBAR | (4186) - INTERNATIONAL 4WD DIESEL TRACTOR (1/76-12/79) |
| (155) - REAR FRAME AND DRIVING MECHANISMS, GEAR SHIFT MECHANISM AND REAR FRAME SPACER | (504) - FARMALL DIESEL TRACTOR (1/61-12/68) |
| (237) - HYDRAULIC SYSTEM, AUXILIARY VALVES AND MANIFOLD TUBES, INTERNATIONAL TRACTORS | (504) - FARMALL DIESEL TRACTOR (1/61-12/68) |
| (155) - REAR FRAME AND DRIVING MECHANISMS, GEAR SHIFT MECHANISM AND REAR FRAME SPACER | (504) - FARMALL GAS TRACTOR (1/60-12/68) |
| (237) - HYDRAULIC SYSTEM, AUXILIARY VALVES AND MANIFOLD TUBES, INTERNATIONAL TRACTORS | (504) - FARMALL GAS TRACTOR (1/60-12/68) |
| (F-47) - HYDRAULICS SYSTEM, AUXILIARY HYDRAULIC VALVE AND TUBES, INTERNATIONAL TRACTORS | (544) - FARMALL TRACTOR (1/68-12/73) |
| (155) - REAR FRAME AND DRIVING MECHANISMS, GEAR SHIFT MECHANISM AND REAR FRAME SPACER | (504) - INTERNATIONAL GAS TRACTOR (1/62-12/68) |
| (237) - HYDRAULIC SYSTEM, AUXILIARY VALVES AND MANIFOLD TUBES, INTERNATIONAL TRACTORS | (504) - INTERNATIONAL GAS TRACTOR (1/62-12/68) |
| (09-01) - FRAME, THREE POINT HITCH | (2500) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/71-12/77) |
| (09-01) - FRAME, THREE POINT HITCH | (574) - INTERNATIONAL SERIES-A TRACTOR (NORTH AMERICA) (1/70-12/77) |
| (120) - HYDRAULIC SYSTEM, AUXILIARY VALVES AND MANIFOLD TUBES | (2404) - INTERNATIONAL INDUSTRIAL TRACTOR (1/61-12/67) |
| (120) - HYDRAULIC SYSTEM, AUXILIARY VALVES AND MANIFOLD TUBES | (404) - INTERNATIONAL TRACTOR (1/61-12/67) |
| (H-14) - CONTROLS, AUXILIARY VALVE HANDLE AND CONNECTIONS | (4100) - INTERNATIONAL 4WD DIESEL TRACTOR (1/66-12/68) |
| (K-03) - DRAWBARS AND HITCHES, HYDRAULIC DRAWBAR | (4100) - INTERNATIONAL 4WD DIESEL TRACTOR (1/66-12/68) |
| (F-18) - HYDRAULIC SYSTEM, HYDRAULIC AUXILIARY VALVE, CONNECTIONS AND HANDLE | (4100) - INTERNATIONAL 4WD DIESEL TRACTOR (1/66-12/68) |
| (162) - DRAWBARS AND HITCHES, THREE-POINT HITCH | (606) - INTERNATIONAL GAS TRACTOR (1/62-12/67) |
| (148) - HYDRAULIC SYSTEM, AUXILIARY VALVES AND TUBES | (606) - INTERNATIONAL GAS TRACTOR (1/62-12/67) |
| (09-01) - FRAME, FIXED DRAWBAR AND SWINGING DRAWBAR, CUB TRACTORS | (INTERNATIONAL) - CUB LO-BOY TRACTOR (1/58-12/58) |
| (09-02) - FRAME, FIXED DRAWBAR AND SWINGING DRAWBAR, CUB LO-BOY TRACTORS | (INTERNATIONAL) - CUB LO-BOY TRACTOR (1/58-12/58) |
| (09-01) - FRAME, FIXED DRAWBAR AND SWINGING DRAWBAR, CUB TRACTORS | (INTERNATIONAL) - CUB TRACTOR (1/47-12/75) |
| (09-02) - FRAME, FIXED DRAWBAR AND SWINGING DRAWBAR, CUB LO-BOY TRACTORS | (INTERNATIONAL) - CUB TRACTOR (1/47-12/75) |
| (9-008) - HITCH LIFT LINKS, P.I.N. 9939634 AND AFTER | (2096) - CASE DIESEL TRACTOR (S/N 17897500 TO 17897505, 17897510 & AFTER (1/87-12/89) |
| (9-008) - THREE POINT HITCH, UPPER LIFT LINK | (2394) - CASE DIESEL TRACTOR (1/85-12/87) |
| (9-008) - THREE POINT HITCH, UPPER LIFT LINK | (2594) - CASE DIESEL TRACTOR (1/85-12/87) |
| (9-008) - THREE POINT HITCH, UPPER LIFT LINK | (3394) - CASE DIESEL TRACTOR (1/85-12/87) |
| (9-008) - THREE POINT HITCH, UPPER LIFT LINK | (3594) - CASE DIESEL TRACTOR (1/85-12/87) |
| (155) - REAR FRAME AND DRIVING MECHANISMS, GEAR SHIFT MECHANISM AND REAR FRAME SPACER | (2504) - INTERNATIONAL TRACTOR (1/62-12/68) |
| (237) - HYDRAULIC SYSTEM, AUXILIARY VALVES AND MANIFOLD TUBES, INTERNATIONAL TRACTORS | (2504) - INTERNATIONAL TRACTOR (1/62-12/68) |
| (K-08) - DRAWBARS AND HITCHES, THREE POINT HITCH, INTERNATIONAL TRACTORS | (2544) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/68-12/73) |
| (F-47) - HYDRAULICS SYSTEM, AUXILIARY HYDRAULIC VALVE AND TUBES, INTERNATIONAL TRACTORS | (2544) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/68-12/73) |
| (162) - DRAWBARS AND HITCHES, THREE-POINT HITCH | (2606) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/62-12/67) |
| (148) - HYDRAULIC SYSTEM, AUXILIARY VALVES AND TUBES | (2606) - INTERNATIONAL INDUSTRIAL DIESEL TRACTOR (1/62-12/67) |
| (F-49) - HYDRAULICS, SINGLE AUXILIARY HYDRAULIC VALVE AND TUBES, INTERNATIONAL TRACTORS S/N 14467 AND BELOW | (2656) - INTERNATIONAL INDUSTRIAL TRACTOR (1/67-12/71) |
| (F-50) - HYDRAULICS, DOUBLE AUXILIARY HYDRAULIC VALVE AND TUBES | (2656) - INTERNATIONAL INDUSTRIAL TRACTOR (1/67-12/71) |
| (F-52) - HYDRAULICS, AUXILIARY VALVE AND TUBES, INTERNATIONAL TRACTORS SERIAL NO. 14468 AND ABOVE | (2656) - INTERNATIONAL INDUSTRIAL TRACTOR (1/67-12/71) |
| (232) - CHASSIS, GEAR SHIFT MECHANISM, REAR FRAME AND HYDRAULIC RESERVOIR COVERS | (350) - INTERNATIONAL UTILITY TRACTOR (1/56-12/58) |
| (239) - CHASSIS, STEERING KNUCKLES, FRONT AXLE & SUPPORTS, FOR TRACTORS EQUIPPED W/ADJUSTABLE TREAD AXLE | (350) - INTERNATIONAL UTILITY TRACTOR (1/56-12/58) |
| (155) - REAR FRAME AND DRIVING MECHANISMS, GEAR SHIFT MECHANISM AND REAR FRAME SPACER | (504) - INTERNATIONAL DIESEL TRACTOR (1/62-12/68) |
| (237) - HYDRAULIC SYSTEM, AUXILIARY VALVES AND MANIFOLD TUBES, INTERNATIONAL TRACTORS | (504) - INTERNATIONAL DIESEL TRACTOR (1/62-12/68) |
| (K-08) - DRAWBARS AND HITCHES, THREE POINT HITCH, INTERNATIONAL TRACTORS | (544) - INTERNATIONAL TRACTOR (1/68-12/73) |
| (F-47) - HYDRAULICS SYSTEM, AUXILIARY HYDRAULIC VALVE AND TUBES, INTERNATIONAL TRACTORS | (544) - INTERNATIONAL TRACTOR (1/68-12/73) |
| (9-606) - LOWER LINKS, 33 INCH FIXED | (585) - CASE IH TRACTOR (1/85-12/90) |
| (9-608) - LOWER LINKS, 33 INCH TELESCOPIC | (585) - CASE IH TRACTOR (1/85-12/90) |
| (F-49) - HYDRAULICS, SINGLE AUXILIARY HYDRAULIC VALVE AND TUBES, INTERNATIONAL TRACTORS S/N 14467 AND BELOW | (656) - INTERNATIONAL TRACTOR (1/67-12/73) |
| (F-50) - HYDRAULICS, DOUBLE AUXILIARY HYDRAULIC VALVE AND TUBES | (656) - INTERNATIONAL TRACTOR (1/67-12/73) |
| (F-52) - HYDRAULICS, AUXILIARY VALVE AND TUBES, INTERNATIONAL TRACTORS SERIAL NO. 14468 AND ABOVE | (656) - INTERNATIONAL TRACTOR (1/67-12/73) |
| (10-19) - HYDRAULICS, AUXILIARY VALVE AND TUBES | (664) - INTERNATIONAL DIESEL TRACTOR (1/72-12/73) |
| (9-544) - LOWER LINKS, 33 INCH TELESCOPIC | (885) - CASE IH TRACTOR (NORTH AMERICA) (1/85-12/90) |
| (055) - CHASSIS, HOOD AND GRILLE | (B275) - MCCORMICK-INTERNATIONAL DIESEL TRACTOR (1/59-12/64) |
| (373) - ATTACHMENTS, TRACTOR CHANGE-OVER PARTS PACKAGE | (200) - FARMALL TRACTOR (1/54-12/56) |
| (218) - CHASSIS, SWINGING DRAWBAR, FOR TRACTORS NOT EQUIPPED WITH FAST-HITCH | (200) - FARMALL TRACTOR (1/54-12/56) |
| (373) - ATTACHMENTS, TRACTOR CHANGE-OVER PARTS PACKAGE | (230) - FARMALL GAS TRACTOR (1/56-12/58) |
| (218) - CHASSIS, SWINGING DRAWBAR, FOR TRACTORS NOT EQUIPPED WITH FAST-HITCH | (230) - FARMALL GAS TRACTOR (1/56-12/58) |
| (373) - ATTACHMENTS, TRACTOR CHANGE-OVER PARTS PACKAGE | (240) - FARMALL TRACTOR (1/58-12/61) |
| (218) - CHASSIS, SWINGING DRAWBAR, FOR TRACTORS NOT EQUIPPED WITH FAST-HITCH | (240) - FARMALL TRACTOR (1/58-12/61) |
| (353) - ATTACHMENTS, COTTON PICKER MOUNTING PARTS, SPECIAL | (300) - FARMALL TRACTOR (1/54-12/56) |
| (208) - CHASSIS, GEAR SHIFT MECHANISM, FORWARD OPERATION, AND REAR FRAME COVER | (300) - FARMALL TRACTOR (1/54-12/56) |
| (211) - CHASSIS, GEAR SHIFT MECHANISM, REVERSE OPERATION, AND REAR FRAME COVER | (300) - FARMALL TRACTOR (1/54-12/56) |
| (232) - CHASSIS, GEAR SHIFT MECHANISM, REAR FRAME AND HYDRAULIC RESERVOIR COVERS | (300) - INTERNATIONAL UTILITY TRACTOR (1/55-12/56) |
| (239) - CHASSIS, STEERING KNUCKLES, FRONT AXLE & SUPPORTS, FOR TRACTORS EQUIPPED W/ADJUSTABLE TREAD AXLE | (300) - INTERNATIONAL UTILITY TRACTOR (1/55-12/56) |
| (353) - ATTACHMENTS, COTTON PICKER MOUNTING PARTS, SPECIAL | (350) - FARMALL TRACTOR (1/56-12/58) |
| (208) - CHASSIS, GEAR SHIFT MECHANISM, FORWARD OPERATION, AND REAR FRAME COVER | (350) - FARMALL TRACTOR (1/56-12/58) |
| (211) - CHASSIS, GEAR SHIFT MECHANISM, REVERSE OPERATION, AND REAR FRAME COVER | (350) - FARMALL TRACTOR (1/56-12/58) |
| (462) - ATTACHMENTS, COTTON PICKER MOUNTING PARTS, SPECIAL, FOR ALL TRACTORS EXCEPT HI-CLEAR MODELS | (400-SERIES) - FARMALL DIESEL TRACTORS (1/54-12/56) |
| (067) - DIESEL ENGINE, CRANKSHAFT AND RELATED PARTS | (400-SERIES) - FARMALL DIESEL TRACTORS (1/54-12/56) |
| (281) - CHASSIS, GEAR SHIFTER MECHANISM AND REAR FRAME COVER, FORWARD OPERATION | (400-SERIES) - FARMALL DIESEL TRACTORS (1/54-12/56) |
| (284) - CHASSIS, GEAR SHIFTER MECHANISM AND REAR FRAME COVER-REVERSE OPERATION | (400-SERIES) - FARMALL DIESEL TRACTORS (1/54-12/56) |
| (462) - ATTACHMENTS, COTTON PICKER MOUNTING PARTS, SPECIAL, FOR ALL TRACTORS EXCEPT HI-CLEAR MODELS | (400-SERIES) - FARMALL GAS TRACTORS (1/54-12/56) |
| (028) - CARBURETED ENGINE, CRANKSHAFT AND RELATED PARTS | (400-SERIES) - FARMALL GAS TRACTORS (1/54-12/56) |
| (281) - CHASSIS, GEAR SHIFTER MECHANISM AND REAR FRAME COVER, FORWARD OPERATION | (400-SERIES) - FARMALL GAS TRACTORS (1/54-12/56) |
| (284) - CHASSIS, GEAR SHIFTER MECHANISM AND REAR FRAME COVER-REVERSE OPERATION | (400-SERIES) - FARMALL GAS TRACTORS (1/54-12/56) |
| (120) - HYDRAULIC SYSTEM, AUXILIARY VALVES AND MANIFOLD TUBES | (404) - FARMALL TRACTOR (1/61-12/67) |
| (462) - ATTACHMENTS, COTTON PICKER MOUNTING PARTS, SPECIAL, FOR ALL TRACTORS EXCEPT HI-CLEAR MODELS | (450-SERIES) - FARMALL DIESEL TRACTORS (1/56-12/58) |
| (067) - DIESEL ENGINE, CRANKSHAFT AND RELATED PARTS | (450-SERIES) - FARMALL DIESEL TRACTORS (1/56-12/58) |
| (281) - CHASSIS, GEAR SHIFTER MECHANISM AND REAR FRAME COVER, FORWARD OPERATION | (450-SERIES) - FARMALL DIESEL TRACTORS (1/56-12/58) |
| (284) - CHASSIS, GEAR SHIFTER MECHANISM AND REAR FRAME COVER-REVERSE OPERATION | (450-SERIES) - FARMALL DIESEL TRACTORS (1/56-12/58) |
| (462) - ATTACHMENTS, COTTON PICKER MOUNTING PARTS, SPECIAL, FOR ALL TRACTORS EXCEPT HI-CLEAR MODELS | (450-SERIES) - FARMALL GAS TRACTORS (1/56-12/58) |
| (028) - CARBURETED ENGINE, CRANKSHAFT AND RELATED PARTS | (450-SERIES) - FARMALL GAS TRACTORS (1/56-12/58) |
| (281) - CHASSIS, GEAR SHIFTER MECHANISM AND REAR FRAME COVER, FORWARD OPERATION | (450-SERIES) - FARMALL GAS TRACTORS (1/56-12/58) |
| (284) - CHASSIS, GEAR SHIFTER MECHANISM AND REAR FRAME COVER-REVERSE OPERATION | (450-SERIES) - FARMALL GAS TRACTORS (1/56-12/58) |
| (139) - CHASSIS, SWINGING DRAWBAR | (FARMALL C) - TRACTOR (1/48-12/51) |
| (09-01) - FRAME, FIXED DRAWBAR AND SWINGING DRAWBAR, CUB TRACTORS | (FARMALL CUB) - TRACTOR (1/47-12/53) |
| (09-02) - FRAME, FIXED DRAWBAR AND SWINGING DRAWBAR, CUB LO-BOY TRACTORS | (FARMALL CUB) - TRACTOR (1/47-12/53) |
| (236) - ATTACHMENTS, ADJUSTABLE WIDE TREAD FRONT AXLE, W/ ADJUSTABLE WHEEL BASE, SPECIAL, FARMALL "H" ONLY | (FARMALL H) - TRACTOR (1/39-12/53) |
| (017) - ENGINE, CRANKSHAFT & RELATED PARTS, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & CRANK | (FARMALL H) - TRACTOR (1/39-12/53) |
| (112) - CHASSIS, TRANSMISSION, BALL BEARING, FIVE SPEEDS FORWARD, ONE REVERSE | (FARMALL H) - TRACTOR (1/39-12/53) |
| (236) - ATTACHMENTS, ADJUSTABLE WIDE TREAD FRONT AXLE, W/ ADJUSTABLE WHEEL BASE, SPECIAL, FARMALL "H" ONLY | (FARMALL HV) - TRACTOR (1/39-12/53) |
| (017) - ENGINE, CRANKSHAFT & RELATED PARTS, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & CRANK | (FARMALL HV) - TRACTOR (1/39-12/53) |
| (112) - CHASSIS, TRANSMISSION, BALL BEARING, FIVE SPEEDS FORWARD, ONE REVERSE | (FARMALL HV) - TRACTOR (1/39-12/53) |
| (319) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE | (FARMALL M) - TRACTOR (1/39-12/52) |
| (018) - CARBURETED ENGINE, CRANKSHAFT, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & CRANK | (FARMALL M) - TRACTOR (1/39-12/52) |
| (050) - DIESEL ENGINE, CRANKSHAFT, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & CRANK | (FARMALL M) - TRACTOR (1/39-12/52) |
| (219) - CHASSIS, TRANSMISSION, BALL BEARING, FIVE SPEEDS FORWARD, ONE REVERSE | (FARMALL M) - TRACTOR (1/39-12/52) |
| (224) - CHASSIS, REVERSE OPERATION ATTACHMENT | (FARMALL M) - TRACTOR (1/39-12/52) |
| (319) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE | (FARMALL MD) - TRACTOR (1/39-12/52) |
| (018) - CARBURETED ENGINE, CRANKSHAFT, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & CRANK | (FARMALL MD) - TRACTOR (1/39-12/52) |
| (050) - DIESEL ENGINE, CRANKSHAFT, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & CRANK | (FARMALL MD) - TRACTOR (1/39-12/52) |
| (219) - CHASSIS, TRANSMISSION, BALL BEARING, FIVE SPEEDS FORWARD, ONE REVERSE | (FARMALL MD) - TRACTOR (1/39-12/52) |
| (224) - CHASSIS, REVERSE OPERATION ATTACHMENT | (FARMALL MD) - TRACTOR (1/39-12/52) |
| (319) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE | (FARMALL MDV) - HIGH CLEARANCE TRACTOR (1/45-12/52) |
| (018) - CARBURETED ENGINE, CRANKSHAFT, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & CRANK | (FARMALL MDV) - HIGH CLEARANCE TRACTOR (1/45-12/52) |
| (050) - DIESEL ENGINE, CRANKSHAFT, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & CRANK | (FARMALL MDV) - HIGH CLEARANCE TRACTOR (1/45-12/52) |
| (219) - CHASSIS, TRANSMISSION, BALL BEARING, FIVE SPEEDS FORWARD, ONE REVERSE | (FARMALL MDV) - HIGH CLEARANCE TRACTOR (1/45-12/52) |
| (224) - CHASSIS, REVERSE OPERATION ATTACHMENT | (FARMALL MDV) - HIGH CLEARANCE TRACTOR (1/45-12/52) |
| (319) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE | (FARMALL MV) - HIGH CLEARANCE TRACTOR (1/52-12/52) |
| (018) - CARBURETED ENGINE, CRANKSHAFT, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & CRANK | (FARMALL MV) - HIGH CLEARANCE TRACTOR (1/52-12/52) |
| (050) - DIESEL ENGINE, CRANKSHAFT, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & CRANK | (FARMALL MV) - HIGH CLEARANCE TRACTOR (1/52-12/52) |
| (219) - CHASSIS, TRANSMISSION, BALL BEARING, FIVE SPEEDS FORWARD, ONE REVERSE | (FARMALL MV) - HIGH CLEARANCE TRACTOR (1/52-12/52) |
| (224) - CHASSIS, REVERSE OPERATION ATTACHMENT | (FARMALL MV) - HIGH CLEARANCE TRACTOR (1/52-12/52) |
| (174) - CASING-TANK, COVERING, LIFT SHAFT, ALTERNATE ARM, CONVEYOR, SECURITY VALVE, LOCK-OUT LEVER, OIL FILT | (FU-267D) - UTILITY TRACTOR (1/10-12/13) |
| (178) - CASING-TANK - COVERING - LIFT SHAFT, LIFT ARM - SECURITY VALVE, LOCK OUT LEVERS, OIL FILTER | (FU-267D) - UTILITY TRACTOR (1/10-12/13) |
| (159) - SWINGING DRAWBAR, STANDARD EQUIPMENT FOR FARMALL F-267 D | (FU-267D) - UTILITY TRACTOR (1/10-12/13) |
| (216) - ATTACHMENTS, TRACTOR CHANGE-OVER PARTS PACKAGE | (SUPER C) - FARMALL TRACTOR (1/51-12/53) |
| (133) - CHASSIS, SWINGING DRAWBAR | (SUPER C) - FARMALL TRACTOR (1/51-12/53) |
| (416) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE, SPECIAL, SUPER "M" & "MD" | (SUPER M) - FARMALL TRACTOR (1/52-12/54) |
| (021) - CARBURETED ENGINE, CRANKSHAFT, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & CRANK | (SUPER M) - FARMALL TRACTOR (1/52-12/54) |
| (065) - DIESEL ENGINE, CRANKSHAFT, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & STARTING CRANK | (SUPER M) - FARMALL TRACTOR (1/52-12/54) |
| (258) - CHASSIS,TRANSMISSION, BALL BEARING, 5 SPEEDS FORWARD, ONE REVERSE | (SUPER M) - FARMALL TRACTOR (1/52-12/54) |
| (264) - CHASSIS, TRANSMISSION, BALL BEARING, 5 SPEEDS FORWARD, ONE REVERSE, FOR TRACTORS 60001 UP | (SUPER M) - FARMALL TRACTOR (1/52-12/54) |
| (270) - CHASSIS, REVERSE OPERATION ATTACHMENT | (SUPER M) - FARMALL TRACTOR (1/52-12/54) |
| (416) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE, SPECIAL, SUPER "M" & "MD" | (SUPER M-TA) - FARMALL TRACTOR (1/54-12/54) |
| (021) - CARBURETED ENGINE, CRANKSHAFT, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & CRANK | (SUPER M-TA) - FARMALL TRACTOR (1/54-12/54) |
| (065) - DIESEL ENGINE, CRANKSHAFT, RODS, PISTONS, CYLINDER SLEEVES, DRIVE PULLEY, FLYWHEEL & STARTING CRANK | (SUPER M-TA) - FARMALL TRACTOR (1/54-12/54) |
| (258) - CHASSIS,TRANSMISSION, BALL BEARING, 5 SPEEDS FORWARD, ONE REVERSE | (SUPER M-TA) - FARMALL TRACTOR (1/54-12/54) |
| (264) - CHASSIS, TRANSMISSION, BALL BEARING, 5 SPEEDS FORWARD, ONE REVERSE, FOR TRACTORS 60001 UP | (SUPER M-TA) - FARMALL TRACTOR (1/54-12/54) |
| (270) - CHASSIS, REVERSE OPERATION ATTACHMENT | (SUPER M-TA) - FARMALL TRACTOR (1/54-12/54) |
| (216) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE, SPECIAL, SUPER "H" | (SUPER-H) - FARMALL TRACTOR (1/53-12/53) |
| (006) - ENGINE, CRANKSHAFT & RELATED PARTS, RODS, PISTONS, CYL. SLEEVES, DRIVE PULLEY, FLYWHEEL, & CRANK | (SUPER-H) - FARMALL TRACTOR (1/53-12/53) |
| (104) - CHASSIS, TRANSMISSION, BALL BEARING, FIVE SPEEDS FORWARD, ONE REVERSE | (SUPER-H) - FARMALL TRACTOR (1/53-12/53) |
| (108) - CHASSIS, REVERSE OPERATION ATTACHMENT | (SUPER-H) - FARMALL TRACTOR (1/53-12/53) |
| (216) - ATTACHMENTS, ADJUSTABLE WIDE FRONT AXLES WITH ADJUSTABLE WHEELBASE, SPECIAL, SUPER "H" | (SUPER-HV) - FARMALL TRACTOR (1/53-12/53) |
| (006) - ENGINE, CRANKSHAFT & RELATED PARTS, RODS, PISTONS, CYL. SLEEVES, DRIVE PULLEY, FLYWHEEL, & CRANK | (SUPER-HV) - FARMALL TRACTOR (1/53-12/53) |
| (104) - CHASSIS, TRANSMISSION, BALL BEARING, FIVE SPEEDS FORWARD, ONE REVERSE | (SUPER-HV) - FARMALL TRACTOR (1/53-12/53) |
| (108) - CHASSIS, REVERSE OPERATION ATTACHMENT | (SUPER-HV) - FARMALL TRACTOR (1/53-12/53) |
