| Узел | Модель |
|---|
| (44.100.01) - WALKING TANDEM ASSEMBLY | (690) - CONSER-TILL (6/06-) |
| (8-2) - HYDRAULIC EQUIPMENT, REAR FURROW WHEEL | (730) - CASE IH MOLDBOARD PLOW (1/88-12/91) |
| (44.100.01) - WALKING TANDEM ASSEMBLY | (MRX690) - CASE IH MULCH-TILL RIPPER (9/01-12/08) |
| (2-10) - ROLLER DRIVE ASSEMBLY, SERIAL NUMBER CFH0124001 THROUGH CFH0124137 | (8435) - CASE IH SILAGE SPECIAL ROUND BALER (1/97-12/00) |
| (2-12) - ROLLER DRIVE ASSEMBLY, SERIAL NUMBER CFH0124401 AND LATER | (8435) - CASE IH SILAGE SPECIAL ROUND BALER (1/97-12/00) |
| (7-34) - WHEEL, HUB AND SPINDLE ASSEMBLY, LEFT | (8435) - CASE IH SILAGE SPECIAL ROUND BALER (1/97-12/00) |
| (7-36) - WHEEL, HUB AND SPINDLE ASSEMBLY, RIGHT | (8435) - CASE IH SILAGE SPECIAL ROUND BALER (1/97-12/00) |
| (9-14) - GATHERING WHEEL KIT, (HK50428 GATHERING WHEEL KIT | (8455) - CASE IH ROUND BALER (STANDARD) (1/92-12/99) |
| (2-16) - ROLLER DRIVE ASSEMBLY (PICKUP AND LOWER) | (8455) - CASE IH ROUND BALER (STANDARD) (1/92-12/99) |
| (7-04) - MAINFRAME, TONGUE AND AXLE ASSEMBLIES | (8455) - CASE IH ROUND BALER (STANDARD) (1/92-12/99) |
| (7-06) - WHEEL, HUB AND AXLE ASSEMBLY | (8455) - CASE IH ROUND BALER (STANDARD) (1/92-12/99) |
| (9-32) - GATHERING WHEEL KIT, HK50428 GATHERING WHEEL KIT COMPLETE, TO BE ORDERED THROUGH WHOLEGOODS ONLY | (8455T) - CASE IH ROUND BALER W/TRACTOR HYDRAULICS (1/92-12/97) |
| (2-12) - ROLLER DRIVE ASSEMBLY, PICKUP AND LOWER | (8455T) - CASE IH ROUND BALER W/TRACTOR HYDRAULICS (1/92-12/97) |
| (7-04) - MAINFRAME, TONGUE AND AXLE ASSEMBLIES | (8455T) - CASE IH ROUND BALER W/TRACTOR HYDRAULICS (1/92-12/97) |
| (7-06) - WHEEL, HUB AND AXLE ASSEMBLY | (8455T) - CASE IH ROUND BALER W/TRACTOR HYDRAULICS (1/92-12/97) |
| (9-30) - GATHERING WHEEL KIT, HK50428 GATHERING WHEEL KIT COMPLETE, TO BE ORDERED THROUGH WHOLEGOODS ONLY | (8460) - CASE IH ROUND BALER (S/N CFH0057418 & AFTER) (1/88-12/93) |
| (9-44) - MESH WRAP KIT, STARTING ROLL DRIVE, PICKUP CLUTCH, SERIAL NUMBER CFH0073272 AND LATER | (8460) - CASE IH ROUND BALER (S/N CFH0057418 & AFTER) (1/88-12/93) |
| (2-16) - ROLLER DRIVE ASSEMBLY, PICKUP AND LOWER | (8460) - CASE IH ROUND BALER (S/N CFH0057418 & AFTER) (1/88-12/93) |
| (7-04) - MAINFRAME, TONGUE AND AXLE ASSEMBLIES | (8460) - CASE IH ROUND BALER (S/N CFH0057418 & AFTER) (1/88-12/93) |
| (7-06) - WHEEL, HUB AND AXLE ASSEMBLY | (8460) - CASE IH ROUND BALER (S/N CFH0057418 & AFTER) (1/88-12/93) |
| (9-32) - GATHERING WHEEL KIT, HK50428 GATHERING WHEEL KIT COMPLETE, TO BE ORDERED THROUGH WHOLEGOODS ONLY | (8465) - CASE IH AUTO ROUND BALER (1/91-12/97) |
| (9-48) - MESH WRAP KIT, STARTING ROLL DRIVE, PICKUP CLUTCH, SERIAL NUMBER CFH0073272 AND LATER | (8465) - CASE IH AUTO ROUND BALER (1/91-12/97) |
| (2-18) - ROLLER DRIVE ASSEMBLY, PICKUP AND LOWER | (8465) - CASE IH AUTO ROUND BALER (1/91-12/97) |
| (8-36) - MESH WRAP, STARTING ROLL DRIVE, PICKUP CLUTCH, SERIAL NUMBER CFH0073272 AND LATER | (8465) - CASE IH AUTO ROUND BALER (1/91-12/97) |
| (7-04) - MAINFRAME, TONGUE AND AXLE ASSEMBLIES | (8465) - CASE IH AUTO ROUND BALER (1/91-12/97) |
| (7-06) - WHEEL, HUB AND AXLE ASSEMBLY | (8465) - CASE IH AUTO ROUND BALER (1/91-12/97) |
| (9-34) - GATHERING WHEEL KIT, HK50428 GATHERING WHEEL KIT COMPLETE, TO BE ORDERED THROUGH WHOLEGOODS ONLY | (8465T) - CASE IH ROUND BALER W/TRACTOR HYDRAULICS (1/91-12/97) |
| (9-42) - MESH WRAP KIT, STARTING ROLL DRIVE, PICKUP CLUTCH, SERIAL NUMBER CFH0073272 AND LATER | (8465T) - CASE IH ROUND BALER W/TRACTOR HYDRAULICS (1/91-12/97) |
| (2-14) - ROLLER DRIVE ASSEMBLY, PICKUP AND LOWER | (8465T) - CASE IH ROUND BALER W/TRACTOR HYDRAULICS (1/91-12/97) |
| (7-04) - MAINFRAME, TONGUE AND AXLE ASSEMBLIES | (8465T) - CASE IH ROUND BALER W/TRACTOR HYDRAULICS (1/91-12/97) |
| (7-06) - WHEEL, HUB AND AXLE ASSEMBLY | (8465T) - CASE IH ROUND BALER W/TRACTOR HYDRAULICS (1/91-12/97) |
| (7-06) - HUB AND AXLE ASSEMBLIES | (8480) - CASE IH FIXED CHAMBER ROUND BALER (1/90-12/00) |
| (7-08) - WHEEL, HUB AND AXLE ASSEMBLY, 11L X 15 | (RS451) - CASE IH ROUND BALER (1/99-12/00) |
| (7-10) - WHEEL, HUB AND AXLE ASSEMBLY, 31 X 13.5 X 15 INCH | (RS451) - CASE IH ROUND BALER (1/99-12/00) |
| (7-08) - WHEEL, HUB AND AXLE ASSEMBLY, 15 INCH | (RS551) - CASE IH ROUND BALER (1/99-12/00) |
| (7-10) - WHEEL, HUB AND AXLE ASSEMBLY, 16.1 INCH | (RS551) - CASE IH ROUND BALER (1/99-12/00) |
| (07-008) - WHEEL, HUB AND AXLE ASSEMBLY (15 INCH) | (RS561) - CASE IH ROUND BALER (1/99-12/00) |
| (07-010) - WHEEL, HUB AND AXLE ASSEMBLY (16.1 INCH) | (RS561) - CASE IH ROUND BALER (1/99-12/00) |
| (7-008) - WHEEL, HUB AND AXLE ASSEMBLY, 16.1 INCH | (RS561A) - CASE IH ROUND BALER (1/99-12/00) |
| (3-14) - WINDGUARD ASSEMBLY - PICKUP | (8545) - CASE IH RECTANGULAR BALER (1/89-12/99) |
| (07-04) - WHEEL, HUB AND AXLE ASSEMBLY | (8555) - CASE IH RECTANGULAR BALER (1/90-12/99) |
| (6-24) - TENSIONER ASSEMBLY | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (EUROPE) (1/95-12/00) |
| (06-072) - TENSIONER ASSEMBLY, S.N. CFH0113001 THRU CFH0117742 | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (NORTH AMERICA) (1/95-12/00) |
| (06-074) - TENSIONER ASSEMBLY, S.N. CFH0117743 AND LATER | (8575) - CASE IH MID-SIZE RECTANGULAR BALER (NORTH AMERICA) (1/95-12/00) |
| (06-28) - TENSIONER ASSEMBLY | (8580) - CASE IH LARGE RECTANGULAR BALER (1/88-12/98) |
| (6-04) - TENSIONER ASSEMBLY | (8585) - CASE IH LARGE (3 X 4) RECTANGLER BALER (1/98-12/00) |
| (06-24) - TENSIONER ASSEMBLY, LOWER | (8590) - CASE IH LARGE (4 X 4) RECTANGULAR BALER (NORTH AMERICA) (1/98-12/00) |
| (6-22) - TENSIONER ASSEMBLY, LOWER | (8590) - CASE IH LARGE RECTANGULAR BALER (EUROPE) (1/97-12/98) |
| (44.100.01) - 783 HUB & SPINDLE | (PULL HITCH) - ATTACHMENT - DMI (1/94-12/10) |
| (44.100.03[00]) - DISC HUB | (ROW MARKERS) - FOR TOOLBAR APPLICATIONS - DMI (1/94-12/06) |
| (44.100.01) - 783 HUB & SPINDLE | (PULL HITCH) - ATTACHMENT - DMI (1/94-12/10) |
| (44.100.03[00]) - DISC HUB | (ROW MARKERS) - FOR TOOLBAR APPLICATIONS - DMI (1/94-12/06) |
| (44.100.03) - 710 HUB AND SPINDLE ASSEMBLY | (NPX2800) - CASE IH APPLICATOR EQUIPMENT - 1300 GALLON (1/08-12/08) |
| (44.100.04) - 633 HUB AND SPINDLE ASSEMBLY | (NPX2800) - CASE IH APPLICATOR EQUIPMENT - 1300 GALLON (1/08-12/08) |
| (44.100.01) - 783 HUB AND SPINDLE ASSEMBLY | (NPX2800) - CASE IH APPLICATOR EQUIPMENT - 850/1000 GALLON (1/05-12/09) |
| (44.100.04) - 633 HUB AND SPINDLE ASSEMBLY | (NPX2800) - CASE IH APPLICATOR EQUIPMENT - 850/1000 GALLON (1/05-12/09) |
| (44.100.01) - 710 HUB & SPINLE ASSEMBLY | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-) |
| (44.100.02) - 633 HUB AND SPINDLE ASSEMBLY | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-) |
| (44.100.03) - DISC HUB | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-) |
| (44.100.05) - 710 HUB AND SPINDLE ASSEMBLY | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (44.100.06) - 783 HUB AND SPINDLE ASSEMBLY | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (44.100.07) - 803 HUB AND SPINDLE ASSEMBLY | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (44.100.08) - 888 HUB AND SPINDLE ASSEMBLY | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (44.100.10) - 633 HUB AND SPINDLE ASSEMBLY | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (44.100.11) - MARKER DISC HUB | (NPX5300) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/09) |
| (44.100.01) - 633 HUB AND SPINDLE ASSEMBLY | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-12/09) |
| (44.100.02) - DISC HUB | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - MOUNTED (8/07-12/09) |
| (44.100.05) - 783 6 BOLT HUB AND SPINDLE | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/12) |
| (44.100.06) - 633 HUB AND SPINDLE ASSEMBLY | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/12) |
| (44.100.07) - ROW MARKDER DISC HUB | (NTX5310) - CASE IH APPLICATOR EQUIPMENT - PULL TYPE (8/07-12/12) |
| (44.100.01) - 783 HUB AND SPINDLE ASSEMBLY | (2800) - DMI NUTRI-PLACR (1/05-12/09) |
| (44.100.04) - 633 HUB AND SPINDLE ASSEMBLY | (2800) - DMI NUTRI-PLACR (1/05-12/09) |
| (44.100.03) - 710 HUB AND SPINDLE ASSEMBLY | (2800-16) - DMI NUTRI-PLACR (1/05-12/10) |
| (44.100.04) - 633 HUB AND SPINDLE ASSEMBLY | (2800-16) - DMI NUTRI-PLACR (1/05-12/10) |
| (44.100.01) - 633 HUB & SPINDLE | (3100) - DMI NUTRI-PLACR (1/88-12/04) |
| (44.100.01) - 710 HUB & SPINLE ASSEMBLY | (3250) - DMI NUTRI-PLACR (1/92-12/07) |
| (44.100.02) - 633 HUB AND SPINDLE ASSEMBLY | (3250) - DMI NUTRI-PLACR (1/92-12/07) |
| (44.100.03) - DISC HUB | (3250) - DMI NUTRI-PLACR (1/92-12/07) |
| (44.100.05) - 710 HUB AND SPINDLE ASSEMBLY | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.06) - 783 HUB AND SPINDLE ASSEMBLY | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.07) - 803 HUB AND SPINDLE ASSEMBLY | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.08) - 888 HUB AND SPINDLE ASSEMBLY | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.09) - 898 HUB AND SPINDLE ASSEMBLY | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.10) - 633 HUB AND SPINDLE ASSEMBLY | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.11) - MARKER DISC HUB | (4300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.05) - 710 HUB AND SPINDLE ASSEMBLY | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.06) - 783 HUB AND SPINDLE ASSEMBLY | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.07) - 803 HUB AND SPINDLE ASSEMBLY | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.08) - 888 HUB AND SPINDLE ASSEMBLY | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.09) - 898 HUB AND SPINDLE ASSEMBLY | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.10) - 633 HUB AND SPINDLE ASSEMBLY | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.11) - MARKER DISC HUB | (5300) - DMI NUTRI-PLACR (1/96-12/06) |
| (44.100.06) - 783 6 BOLT HUB AND SPINDLE | (5310) - DMI NUTRI-TILL'R (6/06-12/09) |
| (44.100.07) - 633 HUB AND SPINDLE ASSEMBLY | (5310) - DMI NUTRI-TILL'R (6/06-12/09) |
| (75.200.13) - ROW MARKDER DISC HUB | (5310) - DMI NUTRI-TILL'R (6/06-12/09) |
| (44.100.01) - 633 HUB AND SPINDLE ASSEMBLY | (5310) - DMI NUTRI-TILL'R - 6 & 8 ROW (1/00-12/09) |
| (44.100.02) - DISC HUB | (5310) - DMI NUTRI-TILL'R - 6 & 8 ROW (1/00-12/09) |
| (44.100.01) - 633 HUB AND SPINDLE ASSEMBLY | (5310) - NUTRI-TILLER - MOUNTED (1/02-12/12) |
| (44.100.02) - DISC HUB | (5310) - NUTRI-TILLER - MOUNTED (1/02-12/12) |
| (44.100.05) - 783 6 BOLT HUB AND SPINDLE | (5310) - NUTRI-TILLER - PULL TYPE (1/02-12/12) |
| (44.100.06) - 633 HUB AND SPINDLE ASSEMBLY | (5310) - NUTRI-TILLER - PULL TYPE (1/02-12/12) |
| (44.100.07) - ROW MARKDER DISC HUB | (5310) - NUTRI-TILLER - PULL TYPE (1/02-12/12) |
| (44.100.01) - Q710 HUB AND SPINDLE | (9000) - DMI NUTRI-PLACR - CADDY UNIT (1/97-12/02) |
| (44.100.02[02]) - GAUGE WHEEL (ASN YCD058005) | (920) - NUTRI-PLACR (1/12-10/16) |
| (44.100.02) - GAUGE WHEEL | (920) - NUTRI-PLACR (1/12-10/16) |
| (9-130) - CASTER WHEEL AXLE, 16 X 6 | (6300) - CASE IH TRAILING PRESS WHEEL GRAIN DRILL (1/90-12/97) |
| (8-36) - GAUGE WHEEL LINES, CYLINDERS AND STROKE CONTROL, WITH MIDWAY TIE ROD TYPE CYLINDERS, 45' WIDE DRILL | (8500) - CASE IH AIR DRILL (8/86-12/89) |
| (9-40) - COULTER ASSEMBLIES | (NFX) - CASE IH AIR TILL DRILL (1/95-12/00) |
| (44.100.01) - HUB AND SPINDLE ASSEMBLY | (2500) - CASE IH RIP-BED (2/04-) |
| (44.100.01[01]) - HUB AND SPINDLE ASSEMBLIES | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (44.100.01) - HUB AND SPINDLE ASSEMBLY | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (44.100.07) - 783 HUB AND SPINDLE | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (44.100.08) - 50-8 HUB AND SPINDLE - C AND D FRAMES | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (44.100.09) - 783 DUAL HUB AND SPINDLE | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (75.200.09) - HEAVY DUTY BERM BUILD'R FOR RIP STRIP UNITS | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (75.200.24) - ROW MARKER DISC HUB | (2500) - CASE IH RIP-STRIP (2/04-4/12) |
| (44.100.01[01]) - HUB AND SPINDLE ASSEMBLIES | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (44.100.01) - HUB AND SPINDLE ASSEMBLY | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (44.100.07) - 783 HUB AND SPINDLE | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (44.100.08) - 50-8 HUB AND SPINDLE - C AND D FRAMES | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (44.100.09) - 783 DUAL HUB AND SPINDLE | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (75.200.09) - HEAVY DUTY BERM BUILD'R FOR RIP STRIP UNITS | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (75.200.24) - ROW MARKER DISC HUB | (2500 ECOLO-TIL) - CASE IH INLINE RIPPER (2/04-) |
| (44.100.01) - HUB AND SPINDLE ASSEMBLY | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (44.100.07) - 783 HUB AND SPINDLE | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (44.100.08) - 50-8 HUB AND SPINDLE - C AND D FRAMES | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (44.100.09) - 783 DUAL HUB AND SPINDLE | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (44.100.10) - ROW MARKER DISC HUB | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (75.200.09) - HEAVY DUTY BERM BUILD'R FOR ECOLO-STRIP UNITS | (2500 ECOLO-TIL) - DMI IN LINE RIPPER (2/04-12/07) |
| (44.100.07) - 783 HUB AND SPINDLE | (2500 ECOLO-TIL) - PULL HITCH - DMI (2/04-) |
| (44.100.08) - 50-8 HUB AND SPINDLE - C AND D FRAMES | (2500 ECOLO-TIL) - PULL HITCH - DMI (2/04-) |
| (44.100.09) - 783 DUAL HUB AND SPINDLE | (2500 ECOLO-TIL) - PULL HITCH - DMI (2/04-) |
| (44.100.01) - HUBS AND SPINDLES | (527B) - CASE IH ECOLO-TIGER MULCH CHISEL (1/86-12/08) |
| (44.100.01) - HUBS & SPINDLES | (527B) - DMI ECOLO-TIGER (1/97-12/08) |
| (75.200.04) - CUSHION DISC MOUNT ASSEMBLY | (530B) - DMI ECOLO-TIGER (1/97-12/07) |
| (75.200.05) - RIGID DISC MOUNT ASSEMBLY | (530B) - DMI ECOLO-TIGER (1/97-12/07) |
| (44.100.01) - HUB AND SPINDLE ASSEMBLIES | (530B) - ECOLO-TIGER MULCH CHISEL (1/97-12/05) |
| (75.200.03) - CUSHION DISC MOUNT ASSEMBLY | (530B) - ECOLO-TIGER MULCH CHISEL (1/97-12/05) |
| (75.200.04) - RIGID DISC MOUNT ASSEMBLY | (530B) - ECOLO-TIGER MULCH CHISEL (1/97-12/05) |
| (75.200.01) - CUSHION DISC MOUNT ASSEMBLY | (530C) - CASE IH ECOLO-TIGER (8/06-12/08) |
| (75.200.02) - RIGID DISC MOUNT ASSEMBLY | (530C) - CASE IH ECOLO-TIGER (8/06-12/08) |
| (75.200.01) - CUSHION DISC MOUNT ASSEMBLY | (530C) - DMI ECOLO-TIGER (1/06-12/06) |
| (75.200.02) - RIGID DISC MOUNT ASSEMBLY | (530C) - DMI ECOLO-TIGER (1/06-12/06) |
| (44.100.01) - HUBS AND SPINDLES | (6700) - CHISEL PLOW (1/00-12/06) |
| (75.200.07) - DISC MOUNT | (6700) - CHISEL PLOW (1/00-12/06) |
| (012) - HUBS & SPINDLES | (6700) - COULTER CHISEL (1/00-12/06) |
| (44.100.01) - HUBS AND SPINDLES | (6750) - CHISEL PLOW (1/00-12/06) |
| (75.200.07) - DISC MOUNT | (6750) - CHISEL PLOW (1/00-12/06) |
| (012) - HUBS & SPINDLES | (6750) - PARABOLIC CHISEL (1/00-12/06) |
| (75.200.04) - CUSHION DISC MOUNT ASSEMBLY | (730B) - DMI ECOLO-TIGER (1/97-12/07) |
| (75.200.05) - RIGID DISC MOUNT ASSEMBLY | (730B) - DMI ECOLO-TIGER (1/97-12/07) |
| (44.100.01) - HUB AND SPINDLE ASSEMBLIES | (730B) - ECOLO-TIGER MULCH CHISEL (1/02-12/05) |
| (75.200.03) - CUSHION DISC MOUNT ASSEMBLY | (730B) - ECOLO-TIGER MULCH CHISEL (1/02-12/05) |
| (75.200.04) - RIGID DISC MOUNT ASSEMBLY | (730B) - ECOLO-TIGER MULCH CHISEL (1/02-12/05) |
| (75.200.01) - CUSHION DISC MOUNT ASSEMBLY | (730C) - CASE IH ECOLO-TIGER (1/06-12/15) |
| (75.200.02) - RIGID DISC MOUNT ASSEMBLY | (730C) - CASE IH ECOLO-TIGER (1/06-12/15) |
| (75.200.01) - CUSHION DISC MOUNT ASSEMBLY | (730C) - DMI ECOLO-TIGER (1/05-12/05) |
| (75.200.02) - RIGID DISC MOUNT ASSEMBLY | (730C) - DMI ECOLO-TIGER (1/05-12/05) |
| (44.100.02) - SINGLE FOLD WING AND 710 WALKING AXLE | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (44.100.07) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 38-1/2 THROUGH 46-1/2 | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (44.100.08[01]) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 48-1/2 THROUGH 60-1/2 MODELS - 2006 AND AFTER | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (44.100.08[02]) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 48-1/2 THROUGH 60-1/2 MODELS - PRIOR TO 2006 | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (44.100.14) - 710 HUB AND SPINDLE ASSEMBLY | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (44.100.15) - 710 HUB AND SPINDLE ASSEMBLY, WINGS ONLY | (200) - TIGERMATE CASE IH FIELD CULTIVATOR (10/04-1/16) |
| (9-070) - WING FRAME AXLE, WHEEL AND HUB WING TYPE MODELS | (4500) - CASE IH VIBRA SHANK CULTIVATOR (1/91-12/98) |
| (9-072) - PNEUMATIC GAUGE WHEEL MOUNTING, WHEEL, AND HUB, WING TYPE MODELS | (4500) - CASE IH VIBRA SHANK CULTIVATOR (1/91-12/98) |
| (9-06) - MAIN FRAME AXLES AND DEPTH CONTROL | (4800) - CASE IH VIBRA SHANK FIELD CULTIVATOR (9/87-12/95) |
| (9-14) - WING FRAME AXLES AND DEPTH CONTROL WITH DUAL WHEELS | (4800) - CASE IH VIBRA SHANK FIELD CULTIVATOR (9/87-12/95) |
| (9-16) - WING FRAME AXLES AND DEPTH CONTROL WITH SINGLE WHEEL | (4800) - CASE IH VIBRA SHANK FIELD CULTIVATOR (9/87-12/95) |
| (9-28) - WING LIFT HINGE | (4800) - CASE IH VIBRA SHANK FIELD CULTIVATOR (9/87-12/95) |
| (39.100.12) - SINGLE FOLD MAIN FRAME | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.01[02]) - SINGLE FOLD M.F & WING 783 WALKING AXLE ASSEMBLY | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.05) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.06) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 48-1/2 THROUGH 60-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.09) - 783 HUB | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.10) - 633 HUB AND SPINDLE ASSEMBLY | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.11) - 710 HUB AND SPINDLE ASSEMBLY STABILIZER WHEEL | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.12) - 710 HUB AND SPINDLE ASSEMBLY, WINGS ONLY | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.12) - SINGLE FOLD MAIN FRAME | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.01[02]) - SINGLE FOLD M.F & WING 783 WALKING AXLE ASSEMBLY | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.05) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.06) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 48-1/2 THROUGH 60-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.09) - 783 HUB | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.10) - 633 HUB AND SPINDLE ASSEMBLY | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.11) - 710 HUB AND SPINDLE ASSEMBLY STABILIZER WHEEL | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.12) - 710 HUB AND SPINDLE ASSEMBLY, WINGS ONLY | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.12) - SINGLE FOLD MAIN FRAME | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.01[02]) - SINGLE FOLD M.F & WING 783 WALKING AXLE ASSEMBLY | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.05) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.06) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 48-1/2 THROUGH 60-1/2 MODELS | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.09) - 783 HUB | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.10) - 633 HUB AND SPINDLE ASSEMBLY | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.11) - 710 HUB AND SPINDLE ASSEMBLY STABILIZER WHEEL | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.12) - 710 HUB AND SPINDLE ASSEMBLY, WINGS ONLY | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.02) - SINGLE FOLD WING AND 710 WALKING AXLE | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (44.100.07) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 38-1/2 THROUGH 46-1/2 | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (44.100.08[01]) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 48-1/2 THROUGH 60-1/2 MODELS - 2006 AND AFTER | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (44.100.08[02]) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 48-1/2 THROUGH 60-1/2 MODELS - PRIOR TO 2006 | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (44.100.14) - 710 HUB AND SPINDLE ASSEMBLY | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (44.100.15) - 710 HUB AND SPINDLE ASSEMBLY, WINGS ONLY | (TIGERMATE II) - CASE IH FIELD CULTIVATOR (10/04-3/09) |
| (39.100.12) - SINGLE FOLD MAIN FRAME | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (44.100.01[02]) - SINGLE FOLD M.F & WING 783 WALKING AXLE ASSEMBLY | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (44.100.05) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 38-1/2 THROUGH 46-1/2 | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (44.100.06) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 48-1/2 THROUGH 60-1/2 MODELS | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (44.100.09) - 783 HUB | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (44.100.10) - 633 HUB AND SPINDLE ASSEMBLY | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (44.100.11) - 710 HUB AND SPINDLE ASSEMBLY STABILIZER WHEEL | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (44.100.12) - 710 HUB AND SPINDLE ASSEMBLY, WINGS ONLY | (TIGERMATE II) - DMI FIELD CULTIVATOR (1/97-12/07) |
| (8-08) - HYDRAULIC SYSTEM TRANSPORT, HYDRAULIC COUPLER | (496) - CASE IH DISK HARROW (1/80-12/91) |
| (9-04) - WING FRAME | (496) - CASE IH DISK HARROW (1/80-12/91) |
| (9-54) - WING GAUGE WHEEL ATTACHMENT | (496) - CASE IH DISK HARROW (1/80-12/91) |
| (8-02) - TRANSPORT LIFT HYDRAULIC CIRCUIT, HOSES WITH FEMALE ENDS | (760) - CASE IH DISK HARROW (1/74-12/02) |
| (39.100.12) - SINGLE FOLD MAIN FRAME | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.01[02]) - SINGLE FOLD M.F & WING 783 WALKING AXLE ASSEMBLY | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.05) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.06) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 48-1/2 THROUGH 60-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.09) - 783 HUB | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.10) - 633 HUB AND SPINDLE ASSEMBLY | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.11) - 710 HUB AND SPINDLE ASSEMBLY STABILIZER WHEEL | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (44.100.12) - 710 HUB AND SPINDLE ASSEMBLY, WINGS ONLY | (TIGER-MATE) - II - DMI DOUBLE FOLD - 38-1/2' TO 50-1/2' (11/12-10/14) |
| (39.100.12) - SINGLE FOLD MAIN FRAME | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.01[02]) - SINGLE FOLD M.F & WING 783 WALKING AXLE ASSEMBLY | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.05) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.06) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 48-1/2 THROUGH 60-1/2 MODELS | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.09) - 783 HUB | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.10) - 633 HUB AND SPINDLE ASSEMBLY | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.11) - 710 HUB AND SPINDLE ASSEMBLY STABILIZER WHEEL | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (44.100.12) - 710 HUB AND SPINDLE ASSEMBLY, WINGS ONLY | (TIGER-MATE) - II - DMI DOUBLE FOLD - 54-1/2' TO 60-1/2' (11/12-10/14) |
| (39.100.12) - SINGLE FOLD MAIN FRAME | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.01[02]) - SINGLE FOLD M.F & WING 783 WALKING AXLE ASSEMBLY | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.05) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 38-1/2 THROUGH 46-1/2 | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.06) - DOUBLE FOLD WALKING AXLE ASSEMBLY (WINGS ONLY) 48-1/2 THROUGH 60-1/2 MODELS | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.09) - 783 HUB | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.10) - 633 HUB AND SPINDLE ASSEMBLY | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.11) - 710 HUB AND SPINDLE ASSEMBLY STABILIZER WHEEL | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (44.100.12) - 710 HUB AND SPINDLE ASSEMBLY, WINGS ONLY | (TIGER-MATE) - II - DMI SINGLE FOLD - 12-1/2' TO 38-1/2' (11/12-3/14) |
| (39.100.01[01]) - MODEL 600 PLOW ASSEMBLY | (600 SERIES) - DMI HYDRA WIDE PLOW (1/78-12/98) |
| (39.100.01[02]) - MODEL 600 PLOW ASSEMBLY | (600 SERIES) - DMI HYDRA WIDE PLOW (1/78-12/98) |
| (8-2) - HYDRAULIC CIRCUIT, DISK GANG AND WHEEL DEPTH CONTROL | (6500) - CASE IH CONSER-TILL PLOW (1/87-12/97) |
| (8-6) - HYDRAULIC CYLINDER, 3 X 8 INCH | (6650) - CASE IH CONSER-TILL PLOW (10/87-12/97) |
| (9-12) - WHEELS AND SPINDLES | (6650) - CASE IH CONSER-TILL PLOW (10/87-12/97) |
| (9-34) - TURNBUCKLE | (6650) - CASE IH CONSER-TILL PLOW (10/87-12/97) |
| (8-02[A]) - FRONT HYDRAULIC EQUIPMENT, 5 FURROW 18 INCH, AUTOMATIC TRIP AND TOGGLE TRIP, ON THE LAND | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (8-02[B]) - FRONT HYDRAULIC EQUIPMENT, 6 FURROW 16 INCH AND18 INCH, AUTOMATIC TRIP AND TOGGLE TRIP, ON THE LAND | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (8-06[A]) - REAR FURROW WHEEL HYDRAULIC EQUIPMENT, 5 FURROW 18 INCH, TOGGLE TRIP, ON THE LAND | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (8-06[B]) - REAR FURROW WHEEL HYDRAULIC EQUIPMENT, 6 FURROW 16 INCH AND 18 INCH, TOGGLE TRIP, ON THE LAND | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (8-08[A]) - REAR FURROW WHEEL HYDRAULIC EQUIPMENT, 4, 5 AND 6 FURROW 16 AND 18 IN. AUTOMATIC TRIP, IN THE FURROW | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (8-08[B]) - REAR FURROW WHEEL HYDRAULIC EQUIPMENT, 5 FURROW 20 INCH, AUTOMATIC TRIP, IN THE FURROW | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (8-08[C]) - REAR FURROW WHEEL HYDRAULIC EQUIPMENT, 7 FURROW 18 INCH AUTOMATIC TRIP & TOGGLE TRIP, IN THE FURROW | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (8-10[A]) - REAR FURROW WHEEL HYDRAULIC EQUIPMENT, 4, 5 AND 6 FURROW 16 AND 18 INCH TOGGLE TRIP, IN THE FURROW | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (8-10[B]) - REAR FURROW WHEEL HYDRAULIC EQUIPMENT, 5 FURROW 20 INCH, TOGGLE TRIP, IN THE FURROW | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (8-10[C]) - REAR FURROW WHEEL HYDRAULIC EQUIPMENT, 7 FURROW 18 INCH, AUTOMATIC TRIP & TOGGLE TRIP, IN THE FURROW | (720) - CASE IH MOLDBOARD PLOW (1/78-12/91) |
| (39.100.01[01]) - MAIN FRAME ASSEMBLY | (9000 SERIES) - DMI HYDRA WIDE PLOW (1/78-12/07) |
| (39.100.01[02]) - MAIN FRAME ASSEMBLY | (9000 SERIES) - DMI HYDRA WIDE PLOW (1/78-12/07) |
| (39.100.01[03]) - MAIN FRAME ASSEMBLY | (9000 SERIES) - DMI HYDRA WIDE PLOW (1/78-12/07) |
| (39.100.04) - GAUGE WHEEL, HUB, ASSY | (870) - ECOLO-TIGER DISK RIPPER (10/08-12/14) |
| (75.200.10) - INDIVIDUAL DISK ATTACHMENT | (870) - ECOLO-TIGER DISK RIPPER (10/08-12/14) |
| (44.100.01) - HUB AND SPINDLE ASSEMBLIES | (9300) - DMI ECOLO-TIGER DISK RIPPER (1/98-12/06) |
| (75.200.04) - CUSHION DISC MOUNT ASSEMBLY | (9300) - DMI ECOLO-TIGER DISK RIPPER (1/98-12/06) |
| (75.200.05) - RIGID DISC MOUNT ASSEMBLY | (9300) - DMI ECOLO-TIGER DISK RIPPER (1/98-12/06) |
| (44.100.01) - HUB AND SPINDLE ASSEMBLIES | (9300) - ECOLO-TIGER DISK RIPPER (7/04-12/09) |
| (75.200.04) - CUSHION DISC MOUNT 2006 MODEL YEAR | (9300) - ECOLO-TIGER DISK RIPPER (7/04-12/09) |
| (75.200.05) - CUSHION DISC MOUNT ASSEMBLY | (9300) - ECOLO-TIGER DISK RIPPER (7/04-12/09) |
| (75.200.07) - RIGID DISC MOUNT ASSEMBLY | (9300) - ECOLO-TIGER DISK RIPPER (7/04-12/09) |
| (44.100.01) - 783 HUB AND SPINDLE | (160) - PT CRUMBLER (6/08-12/15) |
| (44.100.01) - 783 HUB AND SPINDLE | (CRUMBLER) - - DMI (1/87-12/06) |
| (44.100.01) - 783 HUB AND SPINDLE | (CRUMBLER) - 110 CASE IH CRUMBLER (1/04-) |
| (44.100.01) - 783 HUB AND SPINDLE | (P/T CRUMBLER) - DMI SOIL CONDITIONER (1/96-12/02) |
| (44.100.01) - 783 HUB AND SPINDLE | (P/T CRUMBLER) - SOIL CONDITIONER (12/02-12/02) |
| (44.100.03) - OUTER WING WHEELS | (370 TRUE-TANDEM) - 45'-47' DISK HARROW (1/09-12/15) |
| (44.100.06) - 783 HUB AND SPINDLE ASSEMBLY | (370 TRUE-TANDEM) - 45'-47' DISK HARROW (1/09-12/15) |
| (44.100.06) - 633 HUB AND SPINDLE ASSEMBLY | (330 TRUE-TANDEM) - 22'-34' DISK HARROW (8/07-12/14) |
| (44.100.07) - 710 HUB AND SPINDLE ASSEMBLY, GAUGE WHEEL | (330 TRUE-TANDEM) - 22'-34' DISK HARROW (8/07-12/14) |
| (44.100.03) - OUTER WING TANDEM 6-BOLT | (330 TRUE-TANDEM) - 42' - 47' DISK HARROW (8/07-12/14) |
| (44.100.06) - 783 HUB AND SPINDLE ASSEMBLY | (330 TRUE-TANDEM) - 42' - 47' DISK HARROW (8/07-12/14) |
| (44.100.AA[03]) - OUTER WING HUB AND SPINDLE TANDEM 6-BOLT | (TRUE-TANDEM 335VT) - VERTICAL TILLAGE 42 FT WIDTH (10/14-) |
| (44.100.AA[06]) - 783 HUB AND SPINDLE ASSEMBLY | (TRUE-TANDEM 335VT) - VERTICAL TILLAGE 42 FT WIDTH (10/14-) |
| (44.100.AA[03]) - OUTER WING HUB AND SPINDLE TANDEM 6-BOLT | (TRUE-TANDEM 335VT) - VERTICAL TILLAGE 47 FT WIDTH (10/14-8/16) |
| (44.100.AA[06]) - 783 HUB AND SPINDLE ASSEMBLY | (TRUE-TANDEM 335VT) - VERTICAL TILLAGE 47 FT WIDTH (10/14-8/16) |
| (8-10) - CONVEYOR HYDRAULIC LIFT ASSEMBLY | (8880) - DOUBLE WINDROW ATTACHMENT (1/99-12/00) |
| (03-04) - DRIVE ASSEMBLY | (8725) - 2-ROW FORAGE HEAD (30" AND 38" ROWS) (1/99-12/00) |
| (2-04) - BELLCRANK ASSEMBLY | (8750) - 3-ROW 30" FORAGE HEAD (1/99-12/00) |
| (2-18) - DRIVE ASSEMBLY | (8750) - 3-ROW 30" FORAGE HEAD (1/99-12/00) |
| (5-24) - STEERING KNUCKLE, HUB AND WHEELS, FOR 10.00-16 WHEELS | (1620) - CASE IH AXIAL-FLOW COMBINE (S/N JJC0032630 & AFTER) (NORTH AMERICA) (1/90-12/92) |
| (9H-28) - BEAM SUPPORT, CHANNEL AND LEFT HAND PIVOT | (2144) - CASE IH AXIAL-FLOW COMBINE (1/95-12/97) |
| (9H-28) - BEAM SUPPORT, CHANNEL AND LEFT-HAND PIVOT | (2166) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (9H-30) - BEAM SUPPORT, CHANNEL, AND LEFT HAND PIVOT | (2188) - CASE IH AXIAL-FLOW COMBINE (NA) (1/95-12/97) |
| (09H-16) - PLATFORM SUPPORT - LADDER PIVOT - BSN JJC0174259 | (2344) - CASE IH AXIAL-FLOW COMBINE (1/98-1/02) |
| (09H-16) - PLATFORM SUPPORT - LADDER PIVOT - BSN JJC0252303 | (2366) - CASE IH AXIAL-FLOW COMBINE (NA) (1/98-8/04) |
| (09H-18) - PLATFORM SUPPORT - LADDER PIVOT BSN JJC0265305 | (2388) - CASE IH AXIAL-FLOW COMBINE (NA) BSN JJC0276540 (10/97-12/04) |
| (5-12) - STEERING AXLE - FIXED, SERIAL NUMBERS 500 THROUGH 763 | (1400) - INTERNATIONAL HARVESTER COTTON HARVESTER (1/79-12/86) |
| (5-14) - STEERING AXLE - ADJUSTABLE, SERIAL NUMBER 764 AND ABOVE | (1400) - INTERNATIONAL HARVESTER COTTON HARVESTER (1/79-12/86) |
| (7-02) - HEADER LIFT MOUNTING ASSEMBLY | (425) - SHIFTABLE DRAPER GRAIN HEADER (1/99-12/01) |
| (2-08) - HEADER LIFT ASSEMBLY | (8210) - CASE IH PULL-TYPE GRAIN WINDROWER (9/91-12/00) |
| (7-36) - STRUT AND HUB ASSEMBLY, LEFT | (8210) - CASE IH PULL-TYPE GRAIN WINDROWER (9/91-12/00) |
| (7-38) - STRUT AND HUB ASSEMBLY, RIGHT | (8210) - CASE IH PULL-TYPE GRAIN WINDROWER (9/91-12/00) |
| (2-08) - HEADER LIFT ASSEMBLY | (8220) - CASE IH PULL-TYPE GRAIN WINDROWER (1/88-12/91) |
| (7-36) - STRUT AND HUB ASSEMBLY, LEFT | (8220) - CASE IH PULL-TYPE GRAIN WINDROWER (1/88-12/91) |
| (7-38) - STRUT AND HUB ASSEMBLY, RIGHT | (8220) - CASE IH PULL-TYPE GRAIN WINDROWER (1/88-12/91) |
| (2-08) - HEADER LIFT ASSEMBLY | (8230) - CASE IH PULL-TYPE GRAIN WINDROWER (1/91-12/00) |
| (7-36) - STRUT AND HUB ASSEMBLY, LEFT | (8230) - CASE IH PULL-TYPE GRAIN WINDROWER (1/91-12/00) |
| (7-38) - STRUT AND HUB ASSEMBLY, RIGHT | (8230) - CASE IH PULL-TYPE GRAIN WINDROWER (1/91-12/00) |
| (2-08) - HEADER LIFT ASSEMBLY | (8240) - CASE IH PULL-TYPE GRAIN WINDROWER (1/91-12/00) |
| (7-36) - STRUT AND HUB ASSEMBLY, LEFT | (8240) - CASE IH PULL-TYPE GRAIN WINDROWER (1/91-12/00) |
| (7-38) - STRUT AND HUB ASSEMBLY, RIGHT | (8240) - CASE IH PULL-TYPE GRAIN WINDROWER (1/91-12/00) |
| (7-02) - MOUNTING ASSEMBLY | (325) - MULTI-CROP HEADER (1/98-12/01) |
| (9-28) - KNIFE DRIVE, 721, 725, AND 730 WINDROWERS (CONT'D) | (721) - CASE IH PULL-TYPE WINDROWER (1/90-12/99) |
| (9-28) - KNIFE DRIVE, 721, 725, AND 730 WINDROWERS (CONT'D) | (725) - CASE IH PULL-TYPE WINDROWER (1/86-12/90) |
| (9-28) - KNIFE DRIVE, 721, 725, AND 730 WINDROWERS (CONT'D) | (730) - CASE IH PULL-TYPE WINDROWER (1/84-12/90) |
| (9-30) - KNIFE AND KNIFE DRIVE, 736 WINDROWER ONLY | (736) - CASE IH PULL-TYPE WINDROWER (1/87-12/90) |
| (7-16) - HUB, AXLE AND STRUT ASSEMBLY, LEFT | (8309) - CASE IH 9FT ROTARY MOWER CONDITIONER (1/93-12/01) |
| (7-18) - HUB, AXLE AND STRUT ASSEMBLY, RIGHT | (8309) - CASE IH 9FT ROTARY MOWER CONDITIONER (1/93-12/01) |
| (7-20) - HUB, AXLE AND STRUT ASSEMBLY, LEFT | (8312) - CASE IH 12FT ROTARY MOWER CONDITIONER (1/92-12/01) |
| (7-22) - HUB, AXLE AND STRUT ASSEMBLY, RIGHT | (8312) - CASE IH 12FT ROTARY MOWER CONDITIONER (1/92-12/01) |
| (7-16) - HUB, AXLE AND STRUT ASSEMBLY, LEFT | (8315) - CASE IH 15FT ROTARY MOWER CONDITIONER (1/95-12/99) |
| (7-18) - HUB, AXLE AND STRUT ASSEMBLY, RIGHT | (8315) - CASE IH 15FT ROTARY MOWER CONDITIONER (1/95-12/99) |
| (7-16) - HUB, AXLE AND STRUT ASSEMBLY, LEFT | (DC515) - CASE IH PULL-TYPE ROTARY MOWER CONDITIONER (1/98-12/00) |
| (7-18) - HUB, AXLE AND STRUT ASSEMBLY, RIGHT | (DC515) - CASE IH PULL-TYPE ROTARY MOWER CONDITIONER (1/98-12/00) |
| (5-08) - HAY CONDITIONER PIVOT ASSEMBLY | (8320) - CASE IH MOWER CONDITIONER (1/88-12/01) |
| (5-08) - HAY CONDITIONER PIVOT ASSEMBLY | (8330) - CASE IH MOWER CONDITIONER (1/88-12/01) |
| (06-06) - HEADER DRIVE ASSEMBLY, CONTINUED | (8825) - CASE IH SELF-PROPELLED WINDROWER TRACTOR (1/98-12/00) |
| (06-06) - HEADER DRIVE ASSEMBLY, CONTINUED | (8825HP) - CASE IH SELF-PROPELLED WINDROWER TRACTOR (1/98-12/00) |
| (9A-018) - AUGER FEEDER, SUPPORT AND PIVOT ASSEMBLY, 1250 MACHINES, P.I.N. 7001 AND AFTER | (1250) - CASE IH GRINDER-MIXER (1/78-12/86) |
| (9B-50) - HAMMERMILL CLUTCH, 1250 MACHINES, P.I.N. 7001 AND AFTER | (1250) - CASE IH GRINDER-MIXER (1/78-12/86) |
| (9A-006) - AUGER FEEDER, SUPPORT AND PIVOT ASSEMBLY, 1260 MACHINES | (1260) - CASE IH GRINDER-MIXER (10/94-12/00) |
| (9B-018) - SPINDLES AND WHEELS, 1260 MACHINES | (1260) - CASE IH GRINDER-MIXER (10/94-12/00) |
| (9A-008) - AUGER FEEDER, SUPPORT AND PIVOT ASSEMBLY, 1360 MACHINES | (1360) - CASE IH GRINDER-MIXER (10/94-12/00) |
| (9B-020) - SPINDLES AND WHEELS, 1360 MACHINES | (1360) - CASE IH GRINDER-MIXER (10/94-12/00) |
| (6-16) - AXLES AND DRIVE CHAINS, PRIOR TO P.I.N. JAF0095593 | (1818) - CASE UNI-LOADER SKID STEER LOADER (AFTER S/N JAF0069386) (1/91-12/97) |
| (6-18) - AXLES AND DRIVE CHAINS, P.I.N. JAF0095593 AND AFTER | (1818) - CASE UNI-LOADER SKID STEER LOADER (AFTER S/N JAF0069386) (1/91-12/97) |
| (9-08) - 30 INCH (760 MM) PALLET FORK | (1818) - CASE UNI-LOADER SKID STEER LOADER (AFTER S/N JAF0069386) (1/91-12/97) |
| (6-18) - AXLES AND DRIVE CHAINS, USED BEFORE P.I.N. JAF0096515 | (1825) - CASE UNI-LOADER SKID STEER LOADER (S/N JAF0069587 & AFTER) (7/90-12/97) |
| (6-20) - AXLES AND DRIVE CHAINS, USED WITH P.I.N. JAF0096515 AND AFTER | (1825) - CASE UNI-LOADER SKID STEER LOADER (S/N JAF0069587 & AFTER) (7/90-12/97) |
| (9-08) - PALLET FORK | (1825) - CASE UNI-LOADER SKID STEER LOADER (S/N JAF0069587 & AFTER) (7/90-12/97) |
| (6-42) - AXLES AND DRIVE CHAINS | (1825B) - CASE UNI-LOADER SKID STEER LOADER (1/96-12/03) |
| (9-12) - PALLET FORK | (1825B) - CASE UNI-LOADER SKID STEER LOADER (1/96-12/03) |
| (9-34) - MANURE FORK AND GRAPPLE | (1835C) - CASE UNI-LOADER SKID STEER LOADER (7/87-12/95) |
| (9-14) - MANURE FORK & GRAPPLE | (1838) - CASE UNI-LOADER SKID STEER LOADER (1/94-12/96) |
| (09-15) - MANURE FORK, GRAPPLE AND LOADER ATTACHMENT BAR | (1840) - CASE UNI-LOADER SKID STEER LOADER (1/89-12/01) |
| (06-072) - TENSIONER ASSEMBLY, S.N. CFH0113001 THRU CFH0117742 | (8576) - CASE IH BALER AND ACCUMULATOR (1/98-12/00) |
| (06-074) - TENSIONER ASSEMBLY, S.N. CFH0117743 AND LATER | (8576) - CASE IH BALER AND ACCUMULATOR (1/98-12/00) |
| (5-26) - STUB AXLE AND FRONT HUBS | (1210) - DAVID BROWN DIESEL TRACTOR (S/N 11150001 & AFTER) (1/76-1/80) |
| (5-26) - STUB AXLE AND FRONT HUBS | (1212) - DAVID BROWN DIESEL TRACTOR (S/N 11150001 & AFTER) (1/76-12/80) |
| (70) - FRONT AXLE | (880E) - DAVID BROWN IMPLEMATIC LIVEDRIVE TRACTOR (9/64-12/65) |
| (70) - FRONT AXLE | (880F) - DAVID BROWN IMPLEMATIC TRACTOR (9/64-12/65) |
| (70) - FRONT AXLE | (880UE) - DAVID BROWN LIVEDRIVE DIESEL TRACTOR (9/64-12/71) |
| (70) - FRONT AXLE | (880UF) - DAVID BROWN DIESEL TRACTOR (9/64-10/65) |
| (5-14) - FRONT AXLE | (885) - DAVID BROWN DIESEL TRACTOR W/Q CAB (S/N 11000001 TO 11021851) (1/76-12/83) |
| (5-14) - FRONT AXLE | (885N) - DAVID BROWN DIESEL TRACTOR W/Q CAB (S/N 11000001 TO 11021851) (1/76-12/83) |
| (7-014) - CALIPER DISC BRAKE | (2096) - CASE DIESEL TRACTOR (S/N 17897500 TO 17897505, 17897510 & AFTER (1/87-12/89) |
| (5-106) - FRONT HUBS, STUB AXLES AND WHEELS, 2 WHEEL DRIVE TRACTOR | (1294) - CASE DIESEL TRACTOR (1/83-12/85) |
| (5-142) - FRONT HUBS, STUB AXLES AND WHEELS, TWO-WHEEL DRIVE TRACTOR | (1394) - CASE DIESEL TRACTOR (1/85-12/87) |
| (5-130) - STUB AXLES AND FRONT HUBS, TWO WHEEL DRIVE | (1494) - CASE DIESEL TRACTOR (1/85-12/87) |
| (5-122) - STUB AXLES, HUBS AND FRONT WHEELS, TWO-WHEEL DRIVE TRACTORS | (1594) - CASE DIESEL TRACTOR (1/85-12/87) |
| (14-05) - SUSPENSION, ADJUSTABLE FRONT AXLE, SWEPT BACK, TRACTORS WITH 1-11/16 DIAMETER STEERING KNUCKLE POST | (385) - INTERNATIONAL DIESEL TRACTOR (NORTH AMERICA) (1/85-12/90) |
| (5-184) - WHEEL HUBS AND CAPS, ADJUSTABLE FRONT AXLE, STRAIGHT AND SWEPT BACK | (485) - CASE IH TRACTOR (1/85-12/90) |
| (5-030) - WHEEL HUBS, ADJUSTABLE FRONT AXLES | (495) - CASE IH TRACTOR (NORTH AMERICA) (1/91-12/94) |
| (14-04[A]) - FRONT WHEEL HUB, BEARINGS AND CAP ADJUSTABLE FRONT AXLE, STRAIGHT HEAVY DUTY | (584) - INTERNATIONAL TRACTOR (NORTH AMERICA) (1/78-12/84) |
| (14-07) - FRONT WHEEL HUB, BEARINGS AND CAP, ADJUSTABLE FRONT AXLE, SWEPT BACK | (584) - INTERNATIONAL TRACTOR (NORTH AMERICA) (1/78-12/84) |
